Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdicts1.730 Ratgeber und Tests How we test
handgetestet

Deutsch

Artificial Christmas Trees 2026: 10 Models Compared

Artificial Christmas tree or Nordmann fir? 2026 comparison: injection-molded tips, PVC, LED, flocked, dimensions, costs over the years, carbon footprint, care.

handgetestet editorial team · Updated November 16, 2026
Contents22 sections

This guide was first published in German on handgetestet.de.

If you put up the tree on the first Sunday of Advent and only take it down after Epiphany on January 6, you are asking a lot of a cut fir. For this long season, we recommend an artificial tree with injection-molded PE tips, about 180 to 210 cm tall, with hinged branches and a solid stand, for example the RS Trade HXT 1418 Nordmann. If you only want to celebrate the holidays with the real scent, stick with a Nordmann fir and bring it home in mid-December. Both are sensible, and Germans are divided: in a survey commissioned by the growers, a good third bought a real tree, around 30% an artificial one, and about as many went without. It only goes wrong when you buy one and expect the other.

Real or artificial? A calculation over five weeks and ten years

What a warm home does to a cut fir

The calendar makes it clear. In 2026, the first Sunday of Advent falls on November 29; from there it is 25 days to Christmas Eve and 38 to January 6. Hardly any cut tree survives that long at 21 degrees Celsius in the living room without damage. According to the German consumer magazine ÖKO-TEST, the Nordmann fir is the most resilient variety and lasts several weeks with good care, while spruces drop their needles much sooner. According to the same source, a tree two meters tall needs around two liters of water a day.

In practice, that means topping up the water daily, giving it a fresh cut, keeping it away from the radiator, and putting it on a platform if you have underfloor heating. If you manage that and only bring the tree indoors a week before Christmas, a good fir will last into the new year. If you want to decorate it as early as late November, you need luck or an artificial tree.

What ten years of Christmas trees cost

For 2026, the German growers‘ associations expect Nordmann firs to cost 25 to 33 euros per meter of height, after 23 to 30 euros the previous year. A tree of two meters therefore works out at 50 to 66 euros. Over ten years and without further price increases, that is 500 to 660 euros, not counting the stand and disposal.

A midrange injection-molded tree costs a fraction of that in the manufacturer’s online shop. A premium tree from Balsam Hill, on the other hand, needs roughly seven to more than twenty winters, depending on size and lighting, before it has recouped the firs you did not buy. So the artificial tree is not automatically the cheaper option. It only becomes so if it stays in use long enough and does not get damaged in the basement.

The carbon footprint depends on the number of years

This is where people often argue from gut feeling. Reliable figures come from the British Carbon Trust: according to them, a two-meter artificial tree causes around 40 kg of CO2 equivalent, a real fir 16 kg if it rots in landfill and about 3.5 kg if it is chipped, composted or burned. According to the more recent assessment by the same organization, an artificial tree only beats buying a new real tree every year after 7 to 20 years, depending on weight and material.

For you, this means two things. An artificial tree that is replaced after three winters is the worse choice. And a real tree belongs in the municipal collection after the holidays, not in the general waste. According to the industry, around 80% of the trees put up in Germany are grown domestically; imports are mainly Nordmann firs from Denmark. There are no figures on pesticides and transport routes that can be compared as cleanly.

Needles from a mold or from film

The biggest difference between two artificial trees lies in the branch tips. Inexpensive trees get their needles from PVC sheets glued together and cut into fine strips. From a few meters away, you hardly notice. Standing in front of it, it looks flat.

Injection-molded tips made of polyethylene (PE), on the other hand, are produced in a mold and reproduce real twigs with three-dimensional needles. The process is more elaborate, and these trees are priced considerably higher accordingly. In between are mixed trees with injection-molded tips on the outside and PVC as filler on the inside, a sensible compromise for many households, because the inner part is hardly visible behind ornaments and lights anyway. Read carefully!

„PE/PVC“ in the product name does not mean that the whole tree is injection-molded.

Balsam Hill shows how finely this can be graded. The manufacturer sorts its trees into three tiers: at the highest realism level, more than 65% of the tips are injection-molded PE; at the second tier, up to 65%, supplemented by PVC needles near the trunk. The traditional trees are made entirely of PVC. This classification helps with other brands too, because it shows where the money goes.

And the number of tips? It says something about density, but only within the same type of construction. 800 PVC tips and 3,200 injection-molded tips cannot be compared, because an injection-molded tip is often a small twig in itself. So compare trees of the same height and the same material.

Setup, branches and stand: what you notice every year

With hinged branches, the branches are attached to the trunk and fold down like an umbrella. Plug three sections together, fold the branches down, fluff them out. With hook-in branches, you hang each branch individually in the trunk, usually following color coding. That takes longer and makes packing up in January more tedious, but individual branches can be replaced.

Fluffing is underestimated. Every tip has to be bent out of its shipping position, and with a dense injection-molded tree that turns into a long afternoon the first time. Balsam Hill includes gloves for this. For trees without them, thin work gloves help.

For the stand, you can choose between a metal cross and a wooden base. Wood looks homier; a wide metal cross often stands steadier with heavy decorations. If you stick with a real fir after all, the stand determines stability and water supply; more on that in our guide to Christmas tree stands (in German).

Pre-lit or decorate it yourself?

Built-in LEDs save you from wrapping the light string, and on good trees the cables run through the trunk. Balsam Hill calls its system Easy Plug: the sections are plugged together, the power flows through the trunk, and in the end there is only one plug in the wall. That is convenient. If a light string fails in one section, however, the whole tree is affected.

For the living room tree, we therefore tend to recommend an unlit model with a separate string if repairability matters more to you than convenience. If you want the convenience, pay attention to three things. First, the number of LEDs relative to the height, so the tree does not glow unevenly. Then the light color: warm white looks like candlelight, and switchable trees such as the IGOOD can also change to multicolor. And finally, the warranty on the lighting, because it determines what a failure in the fourth winter will cost.

Outdoors, things look different. On a patio or balcony, a pre-lit tree with IP44 splash protection is the simpler solution. Suitable strings can be found in our guide to outdoor string lights (in German), and controllable versions under smart Christmas lighting (in German).

Flocked trees: beautiful, but with quirks

A flocked or snow-covered tree has a flocking of artificial snow applied to its tips. Balsam Hill describes it as a light layer of soft artificial snow, which on the flocked Fraser fir is meant to be distributed more naturally using a proprietary process. Underneath are the same needles as on the green model.

If you are toying with the idea, you should know three things. Flocked tips cannot be fluffed as freely as green ones without the layer suffering. Ornaments look different against a white background: gold and red stand out more, silver almost disappears. And when packing up, the tree belongs in a cover so the flocking does not rub off on other boxes. How much shedding the individual manufacturers consider normal during setup and storage is usually not stated in the listings. If in doubt, ask the seller before setting up a flocked tree over a carpet or sofa.

Inexpensive flocked trees such as the RS Trade HXT 15013 rely on PVC tips with white ends and pine cones. A fully flocked injection-molded tree is the Vivanno Nordmann fir with snow.

Height, width, ceiling: measurements before you buy

Measure upward first. The stated height usually includes the stand, and above the top you still need room for a star or tree topper. With a ceiling height of 2.50 m, a 210 cm tree is the upper limit; in an older building with 3-meter ceilings, a 240 cm tree is fine.

Almost everyone underestimates the diameter. According to the sellers, three trees from our list that are 180 cm tall measure 106, 114 and 120 cm across, and in a corner of a room, 14 cm of difference is a lot. For hallways and small apartments there are slim shapes, such as the slim version of the RS Trade HXT 1101. Fuller and with a snow finish, Balsam Hill’s range includes the Verschneite Schneekiefer (flocked snow pine): according to the manufacturer 213.5 cm tall and 137.5 cm wide, 1,052 tips, 700 white LEDs, 679 euros as of November 14, 2026.

And in January? Taken apart, a 180 cm tree takes up about the space of a large moving box in the basement. Keeping the original box or using a storage bag protects the tips from being crushed.

Ten trees compared by the numbers

The first table shows trees for the living room without built-in lights, the second pre-lit and flocked models. All information comes from the sellers, as of November 2026.

ModelMaterial and tipsHeight and diameterSetup and standPrice range
RS Trade HXT 1418 Nordmann100% injection-molded PE, approx. 3,245 tips180 cm, Ø approx. 120 cm (120 to 240 cm)Hinged branches, metal standaround 155–200 euros in the manufacturer’s shop
Hallerts Alnwick100% injection-molded PE (PlasTip)210 cm, other sizesB1, material TÜV-tested according to the sellerupper midrange
Evergreen Tree Premium100% injection-molded PE180 cm, Ø approx. 116 cm (150 to 250 cm)2 to 3 sections, wooden stand, 9.7 kgupper midrange
RS Trade 23012PE/PVC mix, approx. 1,422 tips180 cm, Ø approx. 114 cmHinged umbrella system, metal standmidrange
RS Trade HXT 1101PVC, approx. 1,160 tips210 cm, Ø approx. 121 cmHinged branches, metal standentry level
ModelMaterialHeight and diameterLights or snowPrice range
IGOOD Premium injection-molded LED100% injection-molded PE, 979 tips180 cm, Ø approx. 117 cm300 LEDs, warm white or multicolorupper midrange
Balsam Hill Canadian Blue Green SprucePVC (traditional line)183 cm, Ø approx. 112 cmclear LEDs pre-installedpremium
Vivanno Nordmann fir with snow100% injection-molded PE210 cmflockedupper midrange
RS Trade HXT 15013PVC with snow tips and pine cones210 cm (120 to 240 cm)flocked tips, metal standentry level to midrange
Best Season / Star Trading OttawaPlasticapprox. 210 cm, Ø approx. 120 cm260 warm white LEDs, IP44midrange

RS Trade HXT 1418 Nordmann

According to the seller, all tips are injection-molded PE, around 3,245 on the 180 cm model. The branches fold like an umbrella, the stand is made of metal, and the material is described as flame-retardant to B1. It is available in heights between 120 and 240 cm. With a diameter of 120 cm, it needs space. For a tree that is meant to return to the middle of the living room every year, the ratio of material to price range is the most convincing on our list.

Hallerts Alnwick

Hallerts sells its injection-molded trees under the name PlasTip; the Alnwick is designed as a Nordmann fir and, according to the seller, is 100% injection-molded. The material is described as flame-retardant to B1 and TÜV-tested. The listing does not clearly state the diameter of the 210 cm version, so measure before ordering. If you are torn between the RS Trade and the Hallerts, it is best to decide by height and availability.

Evergreen Tree Premium

This tree is also made entirely of injection-molded tips, but it stands on a wooden stand, which looks calmer in a living space than a green metal cross. According to the seller, it is made in the EU; the 180 cm version weighs 9.7 kg and is about 116 cm wide. Sizes range from 150 to 250 cm. A word of caution when searching: do not confuse it with other trees simply called „Evergreen.“

RS Trade 23012

A mixed tree made of PE and PVC with injection-molded elements and around 1,422 tips. At 180 cm tall, the seller states a diameter of about 114 cm. If you want to see injection-molded tips but do not want to pay the full premium, this is where you end up.

RS Trade HXT 1101

The classic PVC tree, priced well below the HXT 1418. At 210 cm it has about 1,160 tips and a diameter of 121 cm; at 180 cm around 824 tips and 106 cm. Some buyers describe a full appearance, others gaps. That is enough for the office or as a second tree in the hallway. As the centerpiece of the living room, probably not.

IGOOD Premium injection-molded LED

A pre-lit injection-molded tree with 300 LEDs that switch between warm white and multicolor. According to the listing, the 180 cm version has 979 tips and a diameter of 117 cm. Fewer tips than the HXT 1418, but the lights are already in place. Check which version is offered before you buy, because there are variants with a different number of LEDs.

Balsam Hill Canadian Blue Green Spruce

Amazon.de carries this Balsam Hill tree; it belongs to the traditional line with PVC needles. According to the listing, it measures 183 cm in height and 112 cm in width and comes with clear LED lights. It has little in common with the realistic models from the manufacturer’s shop, but the principle of factory-installed lights is the same.

How a Balsam Hill noble fir with built-in LEDs holds up over several winters is shown in our review of the Balsam Hill noble fir.

Vivanno Nordmann fir with snow

A flocked tree with injection-molded PE tips, offered at 210 cm. It combines three-dimensional needles with the winter look. What we said about flocking above applies here in particular: store it in a cover and be careful when fluffing the branches.

RS Trade HXT 15013

The inexpensive take on the winter look, with PVC needles, white tips and pine cones on a metal stand. According to the seller, it is available from 120 to 240 cm. That works for the hallway, a shop or as a second tree in the dining room. If you expect the look of injection-molded tips, you will be disappointed.

Best Season / Star Trading Ottawa

A pre-lit tree with 260 warm white LEDs, around 210 cm tall and, according to the seller, suitable for indoor and outdoor use thanks to IP44. It is assembled from several sections onto the metal base. Besides green versions, there are white ones and smaller sizes, and because the listings differ, you should check the color and number of LEDs before ordering.

Balsam Hill: the premium class from the manufacturer’s shop

If you are looking for the most realistic artificial tree, sooner or later you will end up at Balsam Hill. The manufacturer sells its top models mainly in its own shop, not through the partners we link to here. That is why there is no buy button here.

Fraser fir

Balsam Hill calls the Fraser fir its most realistic tree. According to the manufacturer, real branches of Abies fraseri served as the template for the tips, from which 40 different tip shapes were designed. It belongs to the tier with the highest realism level, so more than 65% of the tips are injection-molded. In the German shop, it is offered in heights from about 1.70 to just over 2.70 m, unlit or with LEDs, in a price range of around 350 to 1,600 euros depending on size and lighting (as of November 2026).

Flocked Fraser fir

The flocked Fraser fir is the snow-covered version of this tree and therefore the top model if you want white. According to Balsam Hill, its conical shape is intended for large rooms; for small apartments, the manufacturer recommends slim flocked pines instead. Lit versions also use the Easy Plug system in the trunk.

Who is it for? Households that want to keep the tree for ten years or more and look at the needles up close. For everyone else, a good midrange injection-molded tree delivers most of the effect for a fraction of the price.

Care and storage: January decides the next year

An artificial tree ages mainly in the basement. Heat under the roof deforms tips, moisture makes metal parts rust, and heavy boxes flatten branches. Injection-molded branches in particular do not belong under other boxes.

Before packing up, it is worth taking a quick look at the lighting: defective strings or power supplies show up now and not on the first Sunday of Advent. Dust can be removed with a duster or a hair dryer on the cold setting; water has no business on a lit tree.

A real fir needs its care beforehand. Until it is set up, store it in a cool, dark, frost-free place; ÖKO-TEST suggests a basement or an unheated conservatory, not a garage with road salt. Before setting it up, let it acclimatize for one or two days at 10 to 15 degrees Celsius, saw a thin slice off the trunk and do not peel the bark at the base. According to the growers, additives in the water do little.

Safety: B1, safety marks and 50 centimeters of distance

Many sellers advertise building material class B1 according to DIN 4102. This German standard divides building materials into non-combustible (A) and combustible (B). B1 stands for „flame-retardant,“ which means it explicitly belongs to the combustible materials. A B1 tree is harder to ignite, but it can still burn. The information comes from the sellers themselves. We have not seen a test certificate for any of the models.

For real trees, the Nuremberg fire department shows how fast it happens: after seven seconds the flames reach the ceiling, and after 25 seconds the tree is completely ablaze.

The fire department advises never placing Christmas trees right next to exit doors, keeping at least 50 cm away from curtains, ceilings and furniture, and only using electric tree lights with safety marks such as the German VDE or GS. In our view, real wax candles have no place on a plastic tree. If you like candlelight, you will find alternatives among LED candles (in German).

How we would decide

If a tree is to stand in the living room for many years, choose the RS Trade HXT 1418 or the Hallerts Alnwick. Injection-molded tips and hinged branches are the two things you notice every year. The Evergreen Tree Premium offers the same principle with a wooden stand.

The RS Trade 23012 offers a full shape on a medium budget, provided the room can accommodate the width. On a tight budget or just for a few weeks in the office, the RS Trade HXT 1101 is enough, but it hardly gets beyond being a stopgap. The IGOOD brings factory-installed lights to the living room, the Vivanno snow in injection-molded quality. For outdoors with power, the Ottawa is a good fit.

And Balsam Hill? It is worth it for people who see the tree as a piece of furniture for many years. The flocked Fraser fir is the top model there. You will find decorations to go with it in our guide to Christmas tree ornaments (in German), and for the window, an illuminated star (in German) is a good fit.

Frequently asked questions

How tall can my Christmas tree be for my ceiling height?

The stated height usually includes the stand, and above the top you still need room for a star or tree topper. With a ceiling height of 2.50 m, a 210 cm tree is the upper limit. The diameter is often underestimated: according to the sellers, three trees 180 cm tall measure 106, 114 and 120 cm across.

How long does a real Nordmann fir last indoors?

According to the German consumer magazine ÖKO-TEST, a Nordmann fir lasts several weeks with good care, while spruces drop their needles sooner. A tree two meters tall needs around two liters of water a day. From the first Sunday of Advent on November 29, 2026, to Christmas Eve is 25 days, and to January 6 it is 38; a cut fir only manages that with a lot of care. If you want to decorate early, an artificial tree is the better choice.

Is an artificial Christmas tree more environmentally friendly than a real one?

Only if it is used for a long time. The Carbon Trust puts a two-meter artificial tree at around 40 kg of CO2 equivalent, a real fir at 16 kg if it ends up in landfill and about 3.5 kg if it is chipped or burned. According to the Carbon Trust, an artificial tree only beats buying a new real tree every year after 7 to 20 years.

How much does a real Christmas tree cost in 2026?

German growers' associations quote around 25 to 33 euros per meter of height for Nordmann firs in 2026, after 23 to 30 euros the previous year. A two-meter tree therefore costs 50 to 66 euros, or 500 to 660 euros over ten years.

What is the difference between injection-molded and PVC artificial Christmas trees?

PVC needles are made from sheets of film glued together and cut into fine strips, and they look flat up close. Injection-molded tips made of polyethylene are cast in a mold and reproduce real twigs with three-dimensional needles. Mixed trees have injection-molded tips on the outside and PVC as filler on the inside, so PE/PVC in the product name does not mean pure injection molding.

Hinged branches or hook-in branches?

With hinged branches, the branches are attached to the trunk and fold down like an umbrella. With hook-in branches, each branch is hung individually, which takes longer and makes packing up in January more tedious. For storage, the original box or a storage bag protects the tips from being crushed.

Is an artificial Christmas tree with built-in lights worth it?

It is convenient, especially if the power runs through the trunk as with Balsam Hill's Easy Plug system. But if a built-in light string fails, the whole tree is affected. If you want repairability, choose an unlit tree and a separate light string. Outdoors, you need a tree with IP44 splash protection, such as the Ottawa with 260 LEDs.

What should I know about a flocked Christmas tree?

The artificial snow is a flocking applied to the tips. Be careful when fluffing the branches, store the tree in a cover, and before setting it up over a carpet or sofa, ask the seller how much shedding is normal. The top model at Balsam Hill is the flocked Fraser fir; an inexpensive option is the RS Trade HXT 15013 with snow-tipped PVC tips.

Which artificial Christmas tree looks the most realistic?

Trees with a high share of injection-molded tips. Balsam Hill calls its Fraser fir the most realistic tree in its range, with more than 65% injection-molded tips in 40 different shapes. In the midrange, the RS Trade HXT 1418, Hallerts Alnwick and Evergreen Tree Premium are made entirely of injection-molded tips according to the sellers.

What does flame-retardant to B1 mean?

The German standard DIN 4102 divides building materials into non-combustible (A) and combustible (B). B1 stands for "flame-retardant" and explicitly belongs to the combustible materials. A B1 tree is harder to ignite, but it can still burn. The Nuremberg fire department recommends keeping at least 50 cm away from curtains and furniture and using lights with the German VDE or GS safety marks.

Sources

Where to buy

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.