This review was first published in German on handgetestet.de.
The HABAU 2975 nest box hangs in a tree in our garden. As a box for tits, it does what it should. Two things bother us in everyday use, though: we need a small pair of pliers every time we clean it, and there is no provision for mounting it without drilling. Our rating: three out of five stars.
The nest box in our test
In our test: the HABAU 2975, a narrow wooden box with a single-pitch roof made of galvanized sheet metal and an oval manufacturer’s plate on the front. The entrance hole sits in a black plastic ring. According to the listing, two inserts are included, with diameters of 28 and 32 mm. With 28 mm, mainly blue tits can get in; with 32 mm, great tits and sparrows can too. The box comes preassembled.
What we like
The box is simply and sturdily built. The metal roof overhangs at the front and keeps rain away from the entrance hole. The plastic ring protects the wooden edge of the hole. The size suits tits, and the interior is plain, without unnecessary parts. Over time the wood has visibly weathered, but that has not affected how it works.
Cleaning: only with pliers
After the breeding season, the old nest should come out. For this, the box has a flap on the front that is locked at the bottom with a bent wire. We cannot loosen this wire with our fingers, so we use a small pair of pliers every time. That works, but it is awkward on a ladder. A turn latch or a wing screw would be more practical here.
Mounting: room for improvement
This is the biggest weakness. You cannot hang the box without screws or nails, and no tree-friendly hanging system is included. We came up with our own solution: two perforated metal straps are screwed to the sides, and a wire rope hangs from them. The rope runs through a piece of old garden hose and rests over a branch without cutting into the bark. It holds, but it is a DIY job you don’t expect when you buy a ready-made box.

If you hang a box this way, check the branch regularly. A rope that sits too tightly around a branch can become embedded as the branch grows thicker. The hose spreads the pressure, but it does not replace an occasional check.
Product data
Information from the manufacturer’s listing on Amazon Germany, as of November 15, 2026. We have not verified it ourselves.
| Model | HABAU 2975 nest box with galvanized metal roof |
|---|---|
| Material | Wood, roof with zinc sheet |
| Entrance hole | interchangeable plastic inserts, 28 and 32 mm |
| Cleaning | Flap on the front |
| Dimensions | 12 × 12 × 25 cm |
| Delivery condition | preassembled |
| Hanging | no tree-friendly hanging system included (our own observation) |
Our verdict
As a box for tits, the HABAU 2975 is fine: metal roof, interchangeable entrance hole, simple construction. It loses points for the cleaning flap, which we can only open with a tool, and for the lack of a way to hang it without drilling. Three out of five stars. Our nest box guide (in German) compares which boxes are easier to clean and hang.
Are you a manufacturer or retailer and would like us to test your product? Offer a product for testing (in German).
Frequently asked questions
How do you open the HABAU nest box for cleaning?
The flap on the front is locked at the bottom with a bent wire. We loosen it with a small pair of pliers.
Can you hang the nest box without drilling?
No tree-friendly hanging system is included. We ran a wire rope through a piece of garden hose and laid it over a branch, attached to perforated metal straps screwed to the sides.
Which entrance hole size for tits?
According to the listing, inserts with 28 and 32 mm are included. 28 mm mainly suits blue tits, 32 mm also great tits and sparrows.
Conclusion
The HABAU 2975 is a solid box for tits with a metal roof and an interchangeable entrance hole. We need a small pair of pliers to clean it, and there is no solution for hanging it without drilling. Three out of five stars.
Where to buy
- HABAU 2975 Nistkasten mit BlechdachCheck price at Amazon.deAvailable in Germany: Amazon.de
