Contents14 sections
This guide was first published in German on handgetestet.de.
200 kilograms. The figure appears in the title of many solid wood beds and means something different depending on the listing: sometimes per side, sometimes for the whole bed, sometimes only with even distribution. If the two of you are on the heavier side, or you simply want a bed for decades, read the specification first and look at the wood second. The Home affaire Chavot II states it most clearly, which is why it is our pick: 150 kg per side, and the listing also explains where that number comes from. The OTTO home Erno names the highest figure in the lower price range, but it is not made of solid wood throughout.
Wood species, bed edge height, insert depth and oil versus lacquer are covered in our guide to solid wood beds (in German). This one is about two questions that only come up there in passing: What can the bed carry? And is it really solid?
Six beds, six ways to state a load capacity
Comparing the listings, the first thing you notice is how poorly the numbers line up.
- Chavot II: 150 kg per side, with a center support from 140 cm width, 300 kg in the spec field.
- Tommy: 200 kg per side in the product name, nothing in the spec field.
- Huven: 200 kg per side in the name, but in the details „max. approx. 200 kg with even distribution“.
- Ultima: up to 200 kg per sleeping surface with roughly even loading.
- Konrad: 180 kg at 140 cm width, 220 kg at 180 cm.
- Erno: 275 kg, whether 120 or 180 cm wide.
The difference is considerable. 200 kg per side would be 400 kg for a double bed; 200 kg per sleeping surface is half that. For the Huven, both readings appear side by side, and as long as the retailer doesn’t clear this up, we would plan with the lower value. Ask in writing whether the figure applies to the whole bed or one side, whether mattress and slatted base are included and which width is meant.
Then do the math honestly. Two adults weighing 110 and 95 kg put 205 kg on the bed before mattresses and slatted base are added. The mattress weight is on the data sheet; with two mattresses, both count. That already puts you above a Konrad at 140 cm width and above the lower Huven value. It doesn’t mean the bed will break. It means you are outside the specification, and that is what the seller will point to.
„Even distribution“ also deserves a second look. The phrase apparently describes a load resting evenly on the surface. But when you get up, you sit on the edge; when you kneel, two points take the pressure; and children jump. What the bed withstands in those moments, the listings don’t say.
What does the standard actually test?
There is a benchmark: DIN EN 1725, February 2024 edition, sets requirements for the safety, strength and durability of beds. The quality and test rules for the „Goldenes M“, the quality mark of the German furniture industry, refer to it. Under these rules, beds must be stable and sufficiently strong, and the maximum load capacity belongs in the product information for the retailer. None of the six beds here shows a reference to the standard or the mark. That is not proof of a defect. It only means the kilograms remain a seller’s claim whose test method you don’t know. Loft and bunk beds have their own standard, DIN EN 747; what it means for age, fall protection and load capacity is explained in our guide to loft beds for children (in German).
FSC doesn’t answer this question either. Five of the six beds mention the certificate, and the DIN brochure on buying furniture puts it in the right context: it says something about origin from sustainable forestry. It says nothing about strength.
Center support, slatted base and screws
Why is it the Chavot II, of all beds, that gives a clear number? It explains it. From 140 cm bed width there is a center support, and the listing derives the 150 kg per side from that. This is the logic by which every wide bed should be judged. If only the frame carries the load, everything hangs on the corner joints. With a foot in the middle, the free span is halved. If there is no center support in the box, ask for one.
The slatted base has a say too. Konrad and Erno come with one, a roll-up base or a built-in base with 15 slats. All the others come without, and the Chavot II explicitly requires a framed slatted base. Almost everywhere it remains unclear whether the load capacity also applies to your own base, whose load capacity sets a second limit. What matters for frame and slats is in our guide to slatted bed bases (in German).
That leaves the joints. For the Tommy, buyers report a bed that doesn’t creak, but one also writes of almost four hours of assembly with two people, weak screws and cross pieces that had to be shortened. Both fit together. A solid frame is only as good as its assembly, so plan for two people, as the listings for Konrad and Erno recommend.
Is the bed really solid wood?
„Real wood“ is not the same as solid wood. The DIN brochure points this out, because under the German standard DIN 68871, „real wood“ also covers veneers on the visible surfaces. According to the Initiative Pro Massivholz, solid wood furniture must be made entirely of one wood species except for the back panel and drawer bottoms, and must not be veneered. The initiative is an industry association and itself writes that veneered panels are often sold as solid wood in stores.
The Erno shows what that looks like in a listing. The spec field says solid wood, wood species pine. The description says solid pine and MDF. For 275 kg, that doesn’t have to be a disadvantage. But it is not solid through and through, and anyone looking for exactly that is choosing the wrong bed.
In the store, look at the end grain. Every part of a solid wood piece shows growth rings there, and oak also has pores like small pinpricks. Veneered parts lack the rings, and you will usually find a glued-on edge with the same grain pattern as the surface. If you order online, check this right after unpacking, while you can still send it back. Glued laminated slats, by the way, are no false labeling. The Chavot II listing says glued laminated wood, and it is still solid.
One more thing comes with the material. Solid wood moves. The German furniture trade’s quality pass names 45 to 55 % relative humidity over the year as the right indoor climate and considers small cracks, swelling and shrinking unavoidable even then. The listings for the Ultima mention natural growth cracks. That alone is not grounds for a complaint, but you should know about it before buying.
Six solid wood beds by load capacity
| Model | Wood | Load capacity per listing | Insert depth | Delivery | Best for |
|---|---|---|---|---|---|
| Home affaire Chavot II | Heart beech or wild oak, oiled | 150 kg per side | 3 adjustable levels | without base, partly assembled | Couples, high entry |
| Home affaire Tommy | Wild oak, oiled, FSC | 200 kg per side | 13 cm | without base, disassembled | Wild oak, optional storage |
| Home affaire Huven | Oak, oiled, FSC | 200 kg, reading unclear | 16 or 20 cm | without base, disassembled | Up to 200 cm width |
| OTTO home Ultima | Spruce or oak, oiled, FSC | 200 kg per sleeping surface | 12 cm | without base, without headboard | Under sloped ceilings |
| OTTO home Konrad | Pine, FSC | 180 kg (140 cm), 220 kg (180 cm) | 9 cm | with roll-up base, disassembled | Country style, thin mattresses |
| OTTO home Erno | Pine and MDF, FSC | 275 kg | 5.3 cm | with built-in base, disassembled | Storage, tight budget |
Retailer information and approximate dimensions for the version named. The listings don’t say whether mattress and slatted base are included in the load capacity.
Home affaire Chavot II
Mitered frame, 24 mm thick sides, splayed legs and 46 cm high bed sides, which makes getting up easier. The insert depth can be adjusted to three levels, so different mattresses fit. According to the listing, the wood comes from Ukraine and the bed is built in Europe. For 24 mm, 150 kg per side is a clear statement, and there is no test certificate. If you need more, keep looking.
Home affaire Tommy
Wide wild oak beams, made in Denmark, 23 cm ground clearance. Matching storage drawers are sold separately. Buyers highlight how quiet it is in use, while a single report calls the instructions a weak point. If you want a clear statement on load capacity, get „per side“ confirmed in writing.
Home affaire Huven
Solid oak, around 60 kg dead weight at 200 cm width, a choice of 16 or 20 cm insert depth for tall mattresses. The contradictory load capacity is why we don’t rank it at the top. Not every detail adds up either: the listing says both „untreated“ and „oiled“.
OTTO home Ultima
Beam bed on runners without a headboard, good under a window or a sloped ceiling. Spruce is the softer choice compared with oak, and the versions differ widely in price. The load capacity is clearly worded here, for the whole sleeping surface. With a 42 cm sleeping height and a 12 cm insert, getting in stays moderate.
OTTO home Konrad
Curved country-style bed in Northern European pine, roll-up base included, drawers optional. The graded figures by width are honest. The insert depth of only 9 cm calls for a mattress that may stick out at the top. One buyer calls the inner dimensions of the 180 × 200 cm version very tight, so measure.
OTTO home Erno
Plenty of storage with open compartments and a flap, built-in base included, in the lower price range. The bed side measures only 30.5 cm and the base sits 5.3 cm deep, so the bed is low. According to the listing, the 275 kg applies to 120 as well as 180 cm width, which doesn’t convince us without an explanation. If you are looking for solid wood in the strict sense, this is the wrong bed.
How we would decide
- Couple, clear load capacity, high entry: Home affaire Chavot II.
- Wild oak with storage to add later: Home affaire Tommy, get the specification confirmed first.
- Very tall mattress: Home affaire Huven with a 20 cm insert.
- Sloped ceiling: OTTO home Ultima.
- Tight budget and lots of storage: OTTO home Erno, knowing about the MDF content.
Black Friday: with a bed, read the load capacity first, then the discount
Beds also show up in many promotions around Black Friday on November 27. With a heavy-duty bed, a deal is only worth it if the load capacity is stated in the same way as above, that is, per side, per sleeping surface or for the whole bed. Also check the wood species and width, because for the models in this comparison, specifications and prices differ by version. Whether base and mattress are included is in the Delivery column.
On struck-through prices: in Germany, anyone advertising a price reduction must state the lowest price of the last 30 days (§ 11 of the German Price Indication Ordinance). For our pick, the Home affaire Chavot II, you can set a price alert above. If the bed needs to be set up before Christmas, check the delivery time in the listing. More reduced prices are collected on our Black Friday 2026 (in German) page.
Frequently asked questions
What does a load capacity of 200 kg mean for a bed?
It depends on the listing. 200 kg per side would be 400 kg for a double bed; 200 kg per sleeping surface is half that. For the Huven, both readings appear side by side. Ask in writing whether the figure applies to the whole bed, whether mattress and slatted base are included and which width is meant.
Which bed for two heavier people?
Do the math honestly. Two adults weighing 110 and 95 kg put 205 kg on the bed before mattresses and slatted base are added. That already exceeds a Konrad at 140 cm width. A center support that halves the free span is important. The Chavot II has one from 140 cm and states 150 kg per side.
Does a double bed need a center support?
For wide beds, yes. If only the frame carries the load, everything hangs on the corner joints. With a foot in the middle, the free span is halved. The Chavot II derives its load capacity from exactly that. If there is no center support in the box, ask for one, and also check the load capacity of your own slatted base.
How can I recognize real solid wood?
By the end grain. Every part of a solid wood piece shows growth rings there, and oak also shows pores. Veneered parts lack the rings and usually have a glued-on edge. "Real wood" is not the same as solid wood. Check beds ordered online right after unpacking, while you can still send them back.
Does the FSC label say anything about stability?
No. FSC says something about origin from sustainable forestry, nothing about strength. The benchmark for beds is the European standard DIN EN 1725, which the German furniture quality mark "Goldenes M" refers to. None of the six beds in the comparison mentions the standard or carries the mark, so the kilograms remain a seller's claim with an unknown test method.
Sources
- DIN: brochure on buying furniture (PDF, German)
- DIN Media: DIN EN 1725:2024-02
- RAL-GZ 430/5, quality and test rules for beds (PDF, German)
- Initiative Pro Massivholz: how to recognize solid wood furniture
- Initiative Pro Massivholz: solid wood furniture is always in vogue
- Initiative Pro Massivholz: written on the end grain (PDF)
- Kitchen quality pass of the German furniture trade (PDF, solid wood section)
- Retailer information Chavot II (BAUR, German retailer)
- Retailer information Huven (BAUR)
- Retailer information Tommy (BAUR)
- Retailer information Ultima (BAUR)
- Retailer information Konrad (BAUR)
- Retailer information Erno (BAUR)
- German Price Indication Ordinance § 11: price reductions
Where to buy
- Home affaire Chavot IIView at OTTO
- OTTO home ErnoView at OTTO
- Home affaire TommyView at OTTO
- Home affaire HuvenView at OTTO
- OTTO home UltimaView at OTTO
- OTTO home KonradView at OTTO

