Contents12 sections
This guide was first published in German on handgetestet.de.
With a bit set, the number on the lid says surprisingly little. What matters is whether the bits suit your tool and whether the sizes you use all the time are included. For impact drivers and woodwork, we consider the Wera Bit-Check 30 Impaktor 1 the most coherent case; for a compact basic kit for a drill/driver, the 31-piece Wiha Essential Impact Bit Set.
Which tool suits you is covered in our guide to cordless drill/drivers (in German). Here, it is about what goes in the front.
Why an impact driver needs different bits
An impact driver does not turn evenly. It strikes in rapid succession, and every blow lands as a torque peak directly in the bit tip. A very hard standard bit is too brittle for that.
That is why impact bits have a torsion zone, a narrowed section of the shank that gives slightly under load. Bosch describes this zone as a kind of shock absorber that cushions torque peaks. In the Impaktor, Wera combines the torsion zone in the bit with two more in the holder and calls it TriTorsion. The durability promises sound big, too: Wiha claims a 90 times longer service life for its Essential Impact bits than for its own standard bits, and Bosch up to 50 times that of an in-house extra-hard bit for PRO Impact. Both figures only compare with the manufacturer’s own range. They are still useful as a guide.
The other way around works without problems. Bosch explicitly lists its PRO Impact set for impact drivers and for normal drill/drivers. So a set with a torsion zone is rarely wrong, but one without it in an impact driver is.
PH or PZ? Not every cross is the same
Phillips and Pozidriv look the same at first glance. They are not. PB Swiss Tools explains the difference by the flanks: with Phillips, they taper conically toward the tip, and under load a force develops that pushes the screwdriver out of the head. Pozidriv has parallel flanks and prevents this cam-out, which matters especially at high torque.
A PH bit sits in a PZ screw with some play, while a PZ bit does not fit properly in a PH screw. If you then reach for a size smaller, you can easily damage the screw or the tool. The manufacturer’s rule of thumb when in doubt: go with PH. Even better is a set with several PH2 and PZ2 bits. That is the case with all six sets here. Before buying, take a look at your screw assortment (in German) and then check whether the Torx sizes printed there are included in the set.
What a good case contains
- 25 mm bits for the holder, plus some 50 mm or longer for deep holes and tight corners. Wera and Wiha only supply 25 mm; Makita, Milwaukee and Bosch mix lengths.
- A magnetic holder that holds the screw, not just the bit. According to the manufacturer, Wera’s ring magnet also holds long, heavy screws and can be pulled back out of the screwing area for metalwork.
- Torx up to T40, if your screws are that large. Makita stops at T30.
- Socket adapters only if you drive hex head screws, for example in sheet metal or metal construction.
- A case in which every bit has a fixed, labeled spot. Otherwise, the PZ2 will be missing exactly when you are looking for it.
Six bit sets side by side
| Model | Contents | Profiles | Impact driver according to the manufacturer | Best for |
|---|---|---|---|---|
| Wera Bit-Check 30 Impaktor 1 | 29 bits at 25 mm, holder with ring magnet | PH, PZ, TX 10–40, hex | yes, diamond-coated | Woodwork, assembly with an impact driver |
| Wiha Essential Impact Bit Set, 31 pcs. | 30 bits at 25 mm, magnetic holder 74 mm | PH, PZ, T 10–40, hex | yes | Basic kit, small case |
| Bosch PRO Impact Set, 31 pcs. | 30 bits (25, 55, 65 mm), holder 60 mm | PH, PZ, T 15–40, slotted | yes | Pick and Click users |
| Makita B-66880 Impact Black | 30 bits (25, 50 mm), 4 sockets, holder | PH, PZ, T 15–30, slotted | yes | Bits plus sockets up to 13 mm |
| Milwaukee Shockwave Impact Duty, 35 pcs. | 31 bits (25, 50 mm), 3 sockets, holder 60 mm | PH, PZ, TX 10–40 | yes | Job site, Torx-heavy work |
| PB Swiss Tools C6.792 TB | 90 bits, magnetic holder | Slotted, PH, PZ, Torx, tamper-resistant Torx, hex | not listed as impact bits | Workshop, workbench, repairs |
Wera Bit-Check 30 Impaktor 1
Seven PH, seven PZ, eleven Torx from TX 10 to TX 40 and four hex, all 25 mm long. According to Wera, the bits carry fine diamond particles meant to reduce slipping out of the screw head, and they are explicitly designed for impact drivers. The holder with ring magnet makes overhead work easier. Long bits are missing; if you countersink deep, buy an extension as well.
Wiha Essential Impact Bit Set, 31 pcs.
Almost the same selection of sizes as Wera, just without the diamond coating and without the ring magnet. According to Wiha, the 74 mm holder holds screws of normal length; the case measures 106 × 62 × 32 mm and weighs 265 g. That fits in any jacket pocket. A solid choice if the driver is not in use every day.
Bosch PRO Impact Set, 31 pcs.
Bosch mixes three lengths: 16 bits at 25 mm, six at 55 mm and eight double-ended bits at 65 mm, plus a quick-change holder. The case is part of Bosch’s Pick and Click system, which is designed as a box-in-box concept. PZ1 and hex are missing, however. For assembling furniture with small cross-head screws, that is a real drawback.
Makita B-66880 Impact Black
The set combines 16 short and 14 long bits with four magnetic sockets for 6, 8, 10 and 13 mm. Makita specifies high-alloy S2 steel with additional heat treatment and labels the set for impact drivers. With Torx, it stops at T30, and T10 is missing too. If you work with screws that have a T40 drive, you will have to buy that bit separately.
Milwaukee Shockwave Impact Duty, 35 pcs.
Thirteen Torx bits at 25 mm and five at 50 mm: the focus is clearly on Torx. Added to that are PH, PZ, three magnetic sockets for 7, 8 and 10 mm and a 60 mm magnetic holder. Milwaukee credits the Shock Zone with less vibration and fewer tip breakages, and according to the manufacturer the tips are laser-hardened. You will look in vain for slotted and hex.
PB Swiss Tools C6.792 TB
Eighty PrecisionBits in eight BitBlocks, ten long bits and a magnetic holder in a ToolBox with a foam insert, 955 g in total. The bits are color-coded by screw type and, according to PB Swiss, designed for all screwdriving applications. The manufacturer does not list them as impact bits. Their place is the workbench, where almost any profile may be needed, from tamper-resistant Torx to 1.27 mm hex.
How we would decide
- Impact driver, deck, carport, lots of Torx: Wera Bit-Check 30 Impaktor 1. Alternatively Milwaukee, if you want long bits and sockets as well.
- Drill/driver for household and furniture: Wiha Essential Impact. Small, complete, with PZ1 and hex.
- Already have Bosch cases on the shelf: PRO Impact, because the case fits the system. Add a PZ1 separately.
- Metal construction and hex head screws up to 13 mm: Makita B-66880.
- Precision work, repairs, control cabinets: PB Swiss C6.792 TB, but not in an impact driver.
If you also want to pre-drill holes, you will find suitable sets in our guide to drill bit sets (in German).
Frequently asked questions
Why does an impact driver need special bits?
An impact driver strikes in rapid succession, and every blow lands as a torque peak in the bit tip. Very hard standard bits are too brittle for this. Impact bits have a torsion zone that gives slightly under load; Bosch describes it as a kind of shock absorber.
Can I use impact bits in a normal drill/driver?
Yes, the other way around works without problems. Bosch explicitly lists its PRO Impact set for impact drivers and for normal drill/drivers. So a set with a torsion zone is rarely wrong, but one without it in an impact driver is.
What is the difference between PH and PZ?
With Phillips, the flanks taper conically toward the tip, and under load the screwdriver is pushed out of the head. Pozidriv has parallel flanks and prevents this. A PH bit sits in a PZ screw with some play, while a PZ bit does not fit properly in a PH screw. When in doubt, go with PH.
What should a good bit set contain?
25 mm bits for the holder and some 50 mm or longer for deep holes. Plus a magnetic holder that also holds the screw, Torx up to T40 and a case with a fixed, labeled spot for every bit. Socket adapters are only worth it for hex head screws.
Which bit set is suitable for assembling furniture?
For household and furniture, the Wiha Essential Impact is a good fit: small, complete, with PZ1 and hex. The Bosch PRO Impact set lacks PZ1 and hex, which is a real drawback for furniture with small cross-head screws.
Which set is suitable for precision work and repairs?
The PB Swiss Tools C6.792 TB with 90 bits covers almost every profile, from tamper-resistant Torx to very small hex. The bits are color-coded by screw type. The manufacturer does not list them as impact bits; their place is the workbench, not the impact driver.
Sources
- Wera: Bit-Check 30 Impaktor 1
- Wiha: Essential Impact Bit Set, 31 pcs.
- Bosch Professional: PRO Impact screwdriver bit set, 31 pcs.
- Bosch Professional: press release on the Impact Control range (in German)
- Makita: B-66880 bit set, 35 pcs., Impact Black
- Milwaukee: SHOCKWAVE Impact Duty sets
- PB Swiss Tools: PB C6.792 TB
- PB Swiss Tools: Phillips and Pozidriv cross-head screws explained in simple terms
Where to buy
- Wera Bit-Check 30 Impaktor 1Check price at Amazon.de
- Wiha Essential Impact Bit Set 31-tlg.Check price at Amazon.de
- Bosch PRO Impact Schrauberbit-Set 31-tlg.Check price at Amazon.de
- Makita B-66880 Impact BlackCheck price at Amazon.de
- Milwaukee Shockwave Impact Duty 35-tlg.Check price at Amazon.de
- PB Swiss Tools C6.792 TBCheck price at Amazon.de
