Contents10 sections
This guide was first published in German on handgetestet.de.
The big 200-piece case ends up unopened in the basement surprisingly often. No wonder: anyone who works on things already owns screwdrivers and a hammer. A single high-quality piece that fills a real gap brings more joy. In most workshops, that is the Wera Tool-Check PLUS 1. It fits in any drawer and does not conflict with any battery platform.
Take a secret look at the shelf first
Good tool gifts start with a bit of spying. A discreet look into the workshop answers three questions.
First: which batteries are there? Color and labeling are enough. Makita batteries labeled „LXT“ are 18 volts, Milwaukee separates M12 and M18, and Bosch Professional (blue) and Bosch’s green DIY line use different batteries. A tool without a battery only works as a gift if it fits the existing battery. How the platforms relate to each other is covered in our overview of battery platforms.
Second: what is really missing? Rarely a large machine. More likely something for in between: a ratchet for the bike nut, pliers that do not slip, a measuring device instead of a folding ruler.
Third: how tidy is it? If the bits are lying loose in a tin, the recipient will appreciate a set in a sturdy box. If Systainers are already stacking up, the matching tool to go with them is more likely what is needed.
For the budget, a rough scale is enough. At the bottom are good hand tool sets from Wera and Knipex, in the middle cordless tools as bare-tool versions and laser measuring devices. Festool plays above that.
Six gift ideas by budget
| Gift | Type | Price range | Who it suits |
|---|---|---|---|
| Wera Tool-Check PLUS 1 | Ratchet, sockets and bits, 39 pieces | low | Almost everyone, even without a battery platform |
| Knipex 00 20 09 V01 | three pliers, including the Cobra 250 | low | Bathroom, heating, bike, car |
| Milwaukee M12 BI | Cordless compressor, without battery | low to mid | Anyone who already owns M12 batteries |
| Bosch Professional GLM 50-27 CG | Laser distance meter, 50 m | mid | Renovators, planners, furniture makers |
| Makita DTM52Z | Cordless multi-tool, without battery | mid | Anyone who already uses Makita LXT |
| Festool CXS 18-Basic | Compact cordless drill/driver | high | Furniture making, interior finishing, Festool owners |
Wera Tool-Check PLUS 1
Small, but full of everyday use. The box contains a bit ratchet with 60 teeth and a 6-degree return angle, seven Zyklop sockets with 1/4-inch drive, a bit handle and a Rapidaptor quick-release holder. In addition, there are 28 bits for Phillips, Pozidriv, Torx, slotted and hex. The sockets fit onto the ratchet via an adapter. This does not replace a large socket set. It still covers furniture, bikes and household electrics, and larger sets are presented in our guide to socket sets (in German). When buying, the item number 05049055001 is what counts. The older Tool-Check PLUS without the „1“ is still on sale, you see.
Knipex pliers set 00 20 09 V01
Three pliers that almost every workshop needs: combination pliers 03 02 180, diagonal cutters 70 02 160 and the Cobra 87 01 250 water pump pliers. Knipex forges the Cobra from chrome vanadium electric steel; it is oil-hardened and brought to about 61 HRC at the teeth. Under the sink at the trap, everyone ends up reaching for it. However, none of the three is insulated. The set is therefore not suitable for electrical work, and what insulated VDE sets do differently is shown in our guide to pliers sets (in German).
Milwaukee M12 BI
After the first tire change, it lives in the trunk. The small compressor runs on M12 batteries, shows the pressure on an illuminated display and, according to Milwaukee, switches off as soon as the set value is reached. Its hose is 66 centimeters long and stows away in the device. A ball needle, inflation nozzle and adapters for Schrader and Presta valves are included. Battery and charger are not. So without existing M12 batteries, you are also paying for the entry ticket, and then a solution with its own battery is the more honest choice, such as a jump starter power bank (in German) with a pump.
Bosch Professional GLM 50-27 CG
Hardly anyone buys measuring tools for themselves, but they are almost always used gladly. According to Bosch, the GLM 50-27 CG measures from 5 centimeters to 50 meters with a typical accuracy of ±1.5 millimeters, and it captures inclines over 360 degrees. In bright rooms, the green laser is easier to see than a red one. The housing is protected against dust and splashing water according to IP65 and, according to the manufacturer, withstands drops from up to 1.5 meters. Values are sent via Bluetooth to the MeasureOn app.
Two versions are on the market: 0601072U00 with AA batteries and 0601072U01 with a rechargeable battery and USB-C. If you only occasionally measure a room, you do not need this much device. When renovating, laying floors or planning a kitchen, on the other hand, it saves a lot of folding-ruler acrobatics.
Makita DTM52Z
DIYers rarely treat themselves to a multi-tool. Once you have one, it gets used all the time: scraping out joints, shortening a door frame, sawing off a pipe flush. Makita states 10,000 to 20,000 oscillations per minute and an oscillation angle of 2 × 1.8 degrees. The accessory locks into twelve positions in 30-degree increments and accepts Starlock, Starlock Plus and Starlock Max accessories. The Z version comes without battery, charger and accessories. So add a saw blade to the package. An LXT battery has to be there already.
Festool CXS 18-Basic
Luxury, but justifiable luxury. According to Festool, the CXS 18 weighs only 0.7 kilograms, with two gears of up to 470 and 1,600 revolutions per minute and up to 40 newton meters. You change attachments without tools via the FastFix mount, including angle and eccentric attachments. The Basic set includes a keyless chuck, belt clip and Systainer, but no battery. For Festool owners, that is fine. Everyone else should take the considerably more expensive set with battery and charger. Heavy anchor holes in concrete are not its territory. Cheaper all-purpose drill/drivers are shown in our article on cordless drill/drivers (in German).
What you know decides the gift
If you do not know the workshop at all, there is the Wera Tool-Check PLUS 1. You can hardly go wrong with it. If the recipient works on bathrooms, heating or cars, the Knipex set with the Cobra is the better idea. And if a renovation or remodel is coming up, give the Bosch GLM 50-27 CG.
If you have spotted Makita batteries in the garage, the DTM52Z multi-tool is a good fit, ideally together with a set of Starlock saw blades. If Milwaukee M12 is already there, it will be the M12 BI for car and bike.
Can it be something big? Then the Festool CXS 18, as a set with battery if there is no Festool battery in the house yet.
Christmas is not far away. For a little something during Advent, there are suitable calendars in our guide to tool advent calendars (in German). Bigger wishes might be fulfilled by the cordless angle grinder (in German), the plunge saw (in German) or a decent drill bit set (in German). The same applies there: check the battery first, then the tool.
Frequently asked questions
What should you look for when giving tools to a DIYer?
A discreet look into the workshop answers three questions: which batteries are there, what is really missing, and how tidy is it? A tool without a battery only works as a gift if it fits the existing battery. If the bits are lying loose in a tin, the recipient will appreciate a set in a sturdy box.
Can you give a cordless tool without a battery as a gift?
Only if the recipient has the matching platform. Makita batteries labeled LXT are 18 volts, Milwaukee separates M12 and M18, and Bosch Professional (blue) and Bosch green use different batteries. The Makita DTM52Z multi-tool and the Milwaukee M12 BI compressor come without battery and charger.
Is the Knipex pliers set a good gift?
It contains three pliers that almost every workshop needs: combination pliers, diagonal cutters and the Cobra 87 01 250 water pump pliers for bathroom, heating, bike and car. However, none of the three is insulated, so the set is not suitable for electrical work.
Which gift suits renovators?
According to Bosch, the Bosch Professional GLM 50-27 CG laser distance meter measures from 5 centimeters to 50 meters with a typical accuracy of ±1.5 millimeters and transfers values via Bluetooth. The green laser is easier to see in bright rooms. It is available with AA batteries or with a rechargeable battery and USB-C.
Who is the Festool CXS 18 a good gift for?
For furniture making and interior finishing. According to Festool, it weighs only 0.7 kilograms and accepts angle and eccentric attachments without tools via FastFix. The Basic set does not include a battery, so without an existing Festool battery, the set with battery and charger is the right choice. Heavy anchor holes in concrete are not its territory.
What should you watch out for with the Wera Tool-Check PLUS 1?
When buying, the item number 05049055001 is what counts, because the older Tool-Check PLUS without the 1 is still on sale. The set contains a bit ratchet with 60 teeth, seven Zyklop sockets with 1/4-inch drive and 28 bits. It does not replace a large socket set.
Sources
- Wera: Tool-Check PLUS 1, 39 pieces
- Knipex: Cobra 87 01 250
- Milwaukee: M12 BI cordless compressor
- Bosch Professional: GLM 50-27 CG
- Makita: DTM52Z
- Festool: CXS 18-Basic
Where to buy
- Wera Tool-Check PLUS 1Check price at Amazon.de
- Knipex 00 20 09 V01Check price at Amazon.de
- Milwaukee M12 BICheck price at Amazon.de
- Bosch Professional GLM 50-27 CGCheck price at Amazon.de
- Makita DTM52ZCheck price at Amazon.de
- Festool CXS 18-BasicCheck price at Amazon.de
