Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdicts1,731 guides and reviews in German How we test
handgetestet

Deutsch

Buying a Pole Saw 2026: Battery, Reach, Bar Length

Buying a pole saw in 2026: battery or gas, real reach, bar length, weight and safety. Stihl, Makita, Husqvarna, Gardena, Bosch, Einhell.

handgetestet editorial team · Updated November 16, 2026
Contents15 sections

This guide was first published in German on handgetestet.de.

A pole saw doesn’t replace the ladder. It replaces climbing up. For a home garden with fruit trees up to about four meters, a cordless tool with a telescopic shaft and a 20 to 25 cm bar is enough, such as the Husqvarna 120iTK4-P; if you already own batteries from one brand, stick with it. Only businesses that maintain tree crowns every day need gas.

How high can you really reach with it?

The tool length on the box is not the height at which you’ll be sawing. In the manual for the HTA 50, Stihl specifies a working angle of no more than 60 degrees to the horizontal. The shaft shouldn’t be any steeper, because otherwise you’ll end up under the falling branch. Do the rough math: at 60 degrees, a three-meter tool gains about 2.6 m in height. Add the height at which your hands hold the shaft. For an adult, the cut ends up at about four meters, not five.

When Husqvarna and Gardena talk about a reach of up to 4 m, the person holding the tool is included. According to the data sheet, the Husqvarna itself measures 3.04 m. Einhell calls it working height. Bosch talks about a height range between 2.10 and 2.60 m. Before you buy, measure the highest branch you regularly cut. For a half-standard tree in a townhouse garden, a short tool is enough. An old cherry tree in a meadow calls for a telescopic one.

What do the manual and the law require?

The manual for the Stihl HTA 50 is drastic on one point: 15 m distance from live power lines. That also applies to an overhead line leading to the house. Stihl also requires safety glasses to EN 166 or EN ISO 16321, a safety helmet, safety boots and work gloves, plus close-fitting clothing. The manufacturer recommends hearing protection. Bystanders, children and animals should keep 15 m away. Work from the ground, not from a ladder; at height, only from an aerial work platform or secure scaffolding.

Thick branches aren’t cut in one go. Stihl describes first making a relief cut on the compression side, then the separating cut on the tension side, slightly offset toward the trunk. Long branches are first shortened about 20 cm in front of the actual cut point. That way, no bark tears and the bar doesn’t get pinched. A pole saw is explicitly not intended for felling. That’s what the cordless chainsaw (in German) is for.

And the season? In Germany, Section 39(5) of the Federal Nature Conservation Act (Bundesnaturschutzgesetz) prohibits cutting back hedges, bushes and other woody plants or cutting them down to the stump from March 1 to September 30. Gentle shaping and maintenance cuts remain permitted, including to keep trees healthy. The law exempts trees on land used as gardens from the rule on trees. Heavy pruning still belongs in fall and winter. If your municipality has a tree protection ordinance, check with it before major work.

Battery or gas: who still needs a tank?

Few people. Stihl currently lists only the HT 135 as a gas pole saw, designed for professionals in orchards and municipal services. It has a 36.3 cm³ displacement, 1.4 kW and a telescopic shaft from 2.70 to 3.90 m. Without fuel and without the bar, it weighs 7.9 kg. That’s the tool for entire tree-lined avenues, not for three apple trees. In the garden, cordless tools are quieter, start at the flick of a switch and don’t need a fuel mix that gums up in the carburetor over winter. Stihl gives a sound pressure level of 78 dB(A) for the HTA 50, Husqvarna 80.6 dB(A) for the 120iTK4-P.

How long does the bar need to be, and what does the whole thing weigh?

20 cm is enough for typical maintenance cuts on fruit and ornamental trees. 25 cm gives you reserve for branches as thick as a forearm. 30 cm, as on the Makita DUA301, is for people who regularly take down thick crown branches. But more bar also means more weight at the end of a long lever. That’s exactly what you’ll feel in your neck after ten minutes.

When it comes to weight, only careful reading helps. Stihl states 3.6 kg without battery, Husqvarna 3.55 kg without cutting equipment, Bosch 3.6 kg with battery, Makita 7.8 to 8.5 kg with batteries. These figures aren’t directly comparable. Incidentally, a heavy battery at the lower end bothers you less than a heavy head at the top, because it sits close to your hands.

Wouldn’t a telescopic pruning saw do the job?

Often, yes. If you trim a few branches twice a year, you need neither chain oil nor a battery. A hand saw on a telescopic pole is quiet and gets by without oil and a charger. But it takes strength overhead, and with branches thicker than a wrist, it gets tedious. For twigs up to the thickness of a thumb, loppers or pruning shears (in German) are faster. And whatever is lying on the ground is easier to cut up with a reciprocating saw (in German) than with any pole saw.

Seven tools and their key specs according to the manufacturer

ModelPower, barLength or reachWeightBest for
Husqvarna 120iTK4-P36 V, 25 cmReach up to 4 m, telescopic3.55 kg without cutting equipmentHome garden with taller fruit trees
Stihl HTA 5036 V, 25 cm2.80 m, 3.30 m with extension3.6 kg without batteryOwners of Stihl AK batteries
Makita DUA3012 × 18 V, 30 cm2.83 to 4.06 m, telescopic7.8 to 8.5 kg with batteriesLarge orchard, thick branches
Gardena TCS 20/18V P4A18 V, 20 cmReach up to 4 m, telescopicn/aPower for All battery on hand, tall trees
Bosch UniversalChainPole 1818 V, 20 cm2.10 to 2.60 m3.6 kg with batteryLow trees, hedges by the house
Einhell GC-LC 18/20 Li T18 V, 20 cmWorking height 2.03 to 2.87 m2.8 kgPower X-Change users
Gardena combisystem 300 PP with telescopic poleHand saw, 30 cm bladePole 1.60 to 2.90 m, up to about 5 m working heightn/aA few cuts a year

Husqvarna 120iTK4-P

The Husqvarna runs on the 36 V BLi-X system, has a 25 cm bar and, according to the manufacturer, can also be fitted with 30 cm. The telescopic tube takes you up to 4 m, and the shaft can be split for the car trunk and shed. At 10 m/s, the chain runs much faster than on the 18 V tools from Bosch, Gardena and Einhell. In a garden with older fruit trees, we consider this the most well-rounded mix of reach, speed and weight. If you don’t already have a Husqvarna battery, you’ll need the kit with battery and charger.

Stihl HTA 50

A tool without a telescope. The shaft is 2.80 m long, can be split and can be extended to 3.30 m with a Stihl extension. Add to that a 25 cm bar, a branch hook for pulling down cuttings and side-mounted chain tensioning. If you already have Stihl tools with AK batteries, you get a solid tool here. For trees over four meters, the length isn’t enough.

Makita DUA301

Two 18 V batteries, a brushless motor, a 30 cm bar and a chain speed of 20 m/s. Those are numbers for heavy branches. The telescopic shaft extends from 2.83 to 4.06 m, and the oil tank holds 160 ml. It’s still heavy, though. With batteries, Makita gives 7.8 to 8.5 kg, more than twice as much as the 18 V tools. Without a shoulder harness and some practice, that quickly becomes tiring.

Gardena TCS 20/18V P4A

Gardena states a reach of up to 4 m, a 20 cm bar and a head that can be adjusted by up to 90 degrees at the push of a button. At 3.8 m/s, the chain works at a leisurely pace, so thick branches take patience. The battery comes from the Power for All alliance, the same 18 V family as Bosch’s green garden tools. If you already have batteries from it, buy the tool-only version.

Bosch UniversalChainPole 18

Short, light, uncomplicated. Bosch states 3.6 kg with battery, a height range of 2.10 to 2.60 m and a pivoting head with 120 degrees. According to the manufacturer, it manages about 55 cuts through 75 mm thick wood per battery charge. That’s enough for hedges by the house and low trees; for the crown of an old walnut tree, it’s too short.

Einhell GC-LC 18/20 Li T

Einhell gives a product weight of 2.8 kg, a 20 cm bar and 5.5 m/s. The motor head is angled at 30 degrees, and the working height is 2.03 m, or 2.87 m with the extension. It runs on the 18 V batteries from Power X-Change. It makes sense mainly for households where those batteries are already on the shelf.

Gardena combisystem 300 PP with telescopic pole

The saw has a usable blade length of 300 mm and cuts on both the pull and push stroke. Mounted on the 160 to 290 cm aluminum telescopic pole, which locks in 26 cm increments, you reach a working height of about 5 m, according to Gardena. Gardena gives a 25-year warranty on the saw and pole if you register them within three months. For occasional cuts, this is the most sensible solution. No battery ages, no oil drips.

Which pole saw suits which garden?

  • Fruit trees up to four meters, no battery system yet: Husqvarna 120iTK4-P.
  • Green Bosch or Gardena batteries in the shed: Gardena TCS 20/18V P4A for tall trees, Bosch UniversalChainPole 18 for low ones.
  • Stihl AK batteries on hand and trees under four meters: Stihl HTA 50.
  • Traditional orchard meadow with heavy branches: Makita DUA301, with shoulder harness.
  • Einhell batteries on hand: GC-LC 18/20 Li T.
  • Only a few cuts per winter: Gardena saw on the telescopic pole.

For private users, a gas pole saw is only worth considering if several hectares of orchard come with it.

Frequently asked questions

How high can I really reach with a pole saw?

Not as high as the tool's length suggests. Stihl specifies a working angle of no more than 60 degrees, at which a three-meter tool gains about 2.6 m in height. Add the height of your hands, and the cut ends up at about four meters. Reach figures of up to 4 m already include the person.

Battery or gas for a pole saw?

In the garden, battery. Cordless tools are quieter, start at the flick of a switch and don't need a fuel mix that gums up in the carburetor over winter. Gas pole saws such as the Stihl HT 135 are designed for professionals in orchards and municipal services.

How long should the bar of a pole saw be?

20 cm is enough for typical maintenance cuts on fruit and ornamental trees; 25 cm gives you reserve for branches as thick as a forearm. 30 cm, as on the Makita DUA301, is for regularly cutting thick crown branches. But more bar means more weight at the end of a long lever.

When am I allowed to cut trees and hedges?

In Germany, Section 39 of the Federal Nature Conservation Act prohibits cutting back hedges and woody plants or cutting them down to the stump from March 1 to September 30. Gentle shaping and maintenance cuts remain permitted. Heavy pruning belongs in fall and winter; if there is a local tree protection ordinance, check with your municipality first.

What protective equipment do you need for a pole saw?

Stihl requires safety glasses, a safety helmet, safety boots, work gloves and close-fitting clothing; hearing protection is recommended. Keep 15 m away from power lines, and the same distance applies to bystanders, children and animals. Work from the ground, not from a ladder.

How do I properly saw off thick branches?

Not in one go. Stihl describes first making a relief cut on the compression side, then the separating cut on the tension side, slightly offset toward the trunk. Shorten long branches beforehand about 20 cm in front of the cut point, so no bark tears and the bar doesn't get pinched.

Sources

Where to buy

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.