Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdicts1.730 Ratgeber und Tests How we test
handgetestet

Deutsch

Buying a 3D Printer 2026: Open, Enclosed, Multicolor

Buying a 3D printer in 2026: open or enclosed, multicolor printing, build volume and ventilation explained. Six FDM printers from Bambu Lab, Prusa, Creality and more.

handgetestet editorial team · Updated November 16, 2026
Contents13 sections

This guide was first published in German on handgetestet.de.

The shower rod holder has broken, and the spare part is nowhere to be found. For cases like that, for hooks and toys, an open machine such as the Bambu Lab A1 Combo with its multicolor unit goes a surprisingly long way, as long as PLA and PETG are your materials of choice. Once ABS, ASA or fiber-reinforced filaments come into play, you need an enclosed CoreXY printer, such as the Bambu Lab P2S, the Creality K2 or the Elegoo Centauri Carbon 2.

That leaves the crowd that wants to understand their printer and repair it themselves. Prusa built the Core One+ for them. Open system, made in the EU.

Open or enclosed: the material decides

Open printers cost less and are easy to maintain. For PLA, PETG and TPU, they are entirely sufficient. ABS, ASA and polycarbonate, on the other hand, require an enclosure, otherwise larger parts warp. As a bonus, the hood keeps out dust and drafts.

Enclosed does not mean heated. Product descriptions tend to blur this, and many machines only retain heat passively in the enclosure, while an actively heated chamber makes a noticeable difference with engineering materials. So read carefully.

Fiber-reinforced filaments also need a hardened nozzle and at least 300 °C. A quick nozzle swap saves time as soon as you jump between fine and coarse prints.

Printing in color costs time and filament

Almost all manufacturers now rely on an add-on unit with four spools. Bambu Lab calls it AMS, Creality CFS, Elegoo CANVAS and Anycubic ACE Pro. The principle is the same everywhere. So is the drawback: with every color change, leftover filament is purged, which lengthens the print and produces waste.

How often do you really print in color? Answered honestly, this question saves some buyers the extra cost. Also check whether the unit can dry filament and whether additional units can be connected.

Build volume, software, consumables

Around 250 mm per side is standard today. For household parts, that is almost always enough. Larger machines are only worth it if you regularly make helmets, enclosures or cosplay parts.

The software deserves more attention. Does the printer also work without the cloud on the local network or with a memory card? Are spare parts, nozzles and an active community available? And do you keep a choice of filament? The manufacturer’s own spools with RFID chips are convenient, but third-party material should still work, because filament, build plates and nozzles are consumables that you rebuy with every project. That is why they belong in every honest cost calculation, not just after the third empty spool.

Not in the bedroom: particles and ventilation

When plastic melts, ultrafine particles and volatile organic compounds are released. The US Environmental Protection Agency (EPA) and the German Social Accident Insurance (DGUV) have studied this in measurements, and ABS released significantly more particles than PLA. So the printer does not belong next to the bed, and regular ventilation is a must. An enclosure with a filter helps further. What an air purifier can do is shown in our guide buying an air purifier (in German).

Six printers compared by key specs

ModelBuild volumeDesign and multicolorBest for
Bambu Lab A1 Combo256 × 256 × 256 mmopen, AMS lite with 4 colorsBeginners, PLA and PETG
Bambu Lab P2S Combo256 × 256 × 256 mmenclosed, AMS 2 Pro, expandableVersatile for many materials
Prusa Core One+250 × 220 × 270 mmenclosed, chamber up to 55 °C, MMU3 with 5 colorsTinkerers, open system, made in the EU
Creality K2 Combo260 × 260 × 260 mmenclosed, CFS, up to 16 colorsMulticolor printing with lots of expansion
Elegoo Centauri Carbon 2 Combo256 × 256 × 256 mmenclosed, CANVAS with 4 colorsBudget-conscious buyers who want high nozzle temperatures
Anycubic Kobra S1 Combo250 × 250 × 250 mmenclosed, ACE Pro, up to 8 colorsAffordable entry into enclosed printers

Bambu Lab A1 Combo: open and straightforward

An open bed slinger with 256 mm of build volume per side, bundled in the Combo package with the AMS lite for four colors. Bambu Lab does not allow more than that here. Bambu Lab recommends PLA, PETG, TPU and PVA and advises against ABS, ASA and fiber-reinforced filaments. Automatic calibration spares beginners a lot of fiddling.

Bambu Lab P2S Combo: the sensible middle ground

The P2S succeeds the P1S with the same 256 mm per side. According to the manufacturer, the nozzle reaches 300 °C and the print bed 110 °C. The enclosure retains heat with adjustable ventilation and filters the air with activated carbon. There is no active chamber heater, however. The included AMS 2 Pro dries filament, and fully expanded, up to 20 spool slots can be connected to the system. The nozzle is swapped with a clip, without disconnecting any cables.

Prusa Core One+: for everyone who likes to tinker

Enclosed CoreXY design, 250 × 220 × 270 mm build volume. Prusa specifies a chamber temperature of up to 55 °C, plus 290 °C at the nozzle and 120 °C at the bed. Available as a kit or fully assembled, made in the EU according to Prusa, with firmware and design files openly published. For multicolor printing, the MMU3 with five colors is available, and the INDX tool changer has been announced. Only want to print, never tinker? Then you are paying here for a philosophy you do not need.

Creality K2 Combo: lots of colors, but no chamber heater

Enclosed CoreXY printer, 260 mm per side. Creality specifies 300 °C at the nozzle and 100 °C at the bed. Only the K2 Pro and K2 Plus get a heated chamber. The Combo package includes a CFS unit for four spools with RFID recognition, and with up to four such units you get to 16 colors.

Elegoo Centauri Carbon 2 Combo: lots of heat at the nozzle

Enclosed, 256 mm per side. With 350 °C at the nozzle and 110 °C at the bed according to Elegoo, there is plenty of headroom for engineering filaments. The CANVAS unit in the Combo package takes four colors. According to buyer reports, the spools hang on the outside of the printer rather than in a closed box. With moisture-sensitive material, that is a drawback.

Anycubic Kobra S1 Combo: watch the version

CoreXY, enclosed, 250 mm per side, hotend up to 320 °C. The included ACE Pro dries filament during printing, and with a second unit you get to eight colors, according to Anycubic. Look closely when buying. The newer version with the ACE 2 Pro dries at higher temperatures and supports up to 16 colors.

Which printer suits which project

First printer, mostly PLA? Bambu Lab A1 Combo. Open, quick to set up, four colors out of the box. If the machine is to cover household and hobby needs while keeping the door open to engineering materials, we recommend the Bambu Lab P2S Combo: enclosed, with filament drying and plenty of expansion for multicolor printing.

We recommend the Prusa Core One+ to everyone for whom repairability and an open system matter; as a kit, you get to know the machine thoroughly. The Creality K2 Combo offers the most colors at once, with up to four CFS units. And engineering filaments without spending much? Then the Elegoo Centauri Carbon 2 Combo or the Anycubic Kobra S1 Combo.

What each color change costs in filament and time is calculated in our guide to multicolor 3D printing (in German).

Frequently asked questions

Open or enclosed 3D printer: what do I need?

The material decides. For PLA, PETG and TPU, open printers are enough; they cost less and are easy to maintain. ABS, ASA and polycarbonate require an enclosure, otherwise larger parts warp. But enclosed does not mean heated; only a few machines have an actively heated chamber.

Is a multicolor unit worth it on a 3D printer?

Only if you print in color often. With every color change, leftover filament is purged, which lengthens the print and produces waste. Before buying, check whether the unit can dry filament and whether additional units can be connected.

How large should the build volume be?

Around 250 mm per side is standard today and is almost always enough for household parts. Larger machines are only worth it if you regularly make helmets, enclosures or cosplay parts.

Is a 3D printer in the home a health concern?

Melting plastic produces ultrafine particles and volatile organic compounds. Measurements by the US EPA and the DGUV (German Social Accident Insurance) showed significantly more particles with ABS than with PLA. That is why the printer does not belong in the bedroom; regular ventilation is a must, and an enclosure with a filter helps further.

What do you need for fiber-reinforced filaments?

A hardened nozzle and at least 300 °C. According to the manufacturer, the Elegoo Centauri Carbon 2 offers 350 °C at the nozzle, while the Bambu Lab P2S and the Creality K2 each offer 300 °C. The open Bambu Lab A1 is not designed for such filaments.

What should I look for in software and filament?

What matters is whether the printer also works without the cloud on the local network or with a memory card, and whether spare parts and an active community are available. The manufacturer's own spools with RFID chips are convenient, but third-party material should still work. Filament, build plates and nozzles belong in every cost calculation.

Sources

Where to buy

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.