Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdicts1.730 Ratgeber und Tests How we test
handgetestet

Deutsch

Gimisgu Robotic Mower Garage Review: No Satellite Reception for the Navimow

The Gimisgu robotic mower garage made of galvanized steel makes a high-quality impression. But under its metal roof, our Segway Navimow i105 had no satellite reception. Unsuitable for satellite-guided mowers, one out of five stars.

Christian Blank · handgetestet editorial team · November 16, 2026
Segway Navimow i105 parked on its charging plate inside the black metal Gimisgu robotic mower garage in front of a hedgeImage: handgetestet.de

This review was first published in German on handgetestet.de.

The Gimisgu robotic mower garage is a black, open-sided cover made of galvanized steel. It is designed to protect the mower from rain, hail, sun and wind and, according to the manufacturer, fits a wide range of robotic mowers. We used it with our Segway Navimow i105. The result: under the metal roof, the mower had no satellite reception at all. One out of five stars.

Specifications

All figures in the table are Gimisgu’s specifications from the product page, as of November 14, 2026. We did not measure them ourselves. What we experienced firsthand is described in the sections below.

Dimensions78 × 60 × 34 cm (length × width × height)
MaterialGalvanized sheet steel, 1.5 mm
DesignOpen garage design
Anchoring6 ground anchors, 2 X-shaped support braces
ProtectionAgainst rain, hail, UV radiation, sun and wind
IncludedMounting hardware, instructions, gloves
ColorBlack
Item numberFG-B10281-1j

First impression: well thought out and solid

On its own, the garage makes a very well-thought-out, high-quality impression. The sheet metal is cleanly folded and coated black, the side walls have cutouts, and the roof is in two parts. Our Navimow fit underneath along with its charging plate. We have nothing to fault about the material.

Black Gimisgu robotic mower garage seen from above, with a two-part metal roof, on a concrete slab next to the lawn
The two-part roof made of galvanized, black-coated sheet steel.

The problem: no satellite reception

The Segway Navimow i105 mows without a boundary wire. It determines its position via satellite positioning, supplemented by a camera. For that, it needs a clear view of the sky. Under the Gimisgu garage, our mower showed no satellite signal whatsoever; the reading was at zero. The metal roof blocks the signals completely.

Gimisgu, on the other hand, promises in its product description: „Thanks to precise dimensions and a well-thought-out opening design, the robotic mower garage fits a wide range of leading smart lawn mowers, ensuring it works perfectly with devices from different brands.“ We found no mention, either in the description or in the specifications, that the metal roof can block satellite reception. Whether that omission is deliberate or not is secondary: as it is, the garage can’t be used with a satellite-guided mower.

Putting it in context: metal and satellite positioning

Metal above a receiver causing interference is not a quirk of this particular garage. Stiftung Warentest, Germany’s consumer testing organization, names roofs and canopies, along with dense trees and tall house walls, as typical obstacles to reception for robotic mowers with satellite positioning. With a closed steel cover directly above the mower, the effect is at its strongest. Our guide Robotic mower navigation: RTK, LiDAR, camera or wire? (in German) explains how the different navigation types work and where they reach their limits.

Navimow offers its own plastic garage for the i Series. According to the retailer, it measures 60 × 42 × 82 cm, weighs 7.6 kg and blocks neither signals nor connection. We have not tried it.

Who is the garage for?

If you use a robotic mower with a boundary wire, you can consider the Gimisgu garage. Such a mower doesn’t need satellite reception, and the material and build quality convinced us. But measure first: at 34 cm high according to the manufacturer, it is on the low side.

It is not suitable for mowers that navigate by satellite, whether with their own antenna in the garden or with correction data from the network. We have not tried this garage with mowers that orient themselves by laser or by camera only.

What to know before you buy

  • Find out how your mower navigates. If the manual mentions RTK, GNSS or GPS, no metal roof belongs over the charging station.
  • First ask your mower’s manufacturer about a suitable garage. It will be matched to the station and to reception.
  • After setting it up, check the signal strength in the app while the mower is in the station.
  • According to the manufacturer, gloves are included. Sheet metal covers often have sharp edges, so wear them during assembly.

Alternatives

We have compiled which garages are available for the various mower brands in our guide to buying a robotic mower garage (in German). Our buying guide to robotic mowers without a boundary wire (in German) explains what matters with wire-free mowers. Our review of the Ecovacs GOAT O1200 LiDAR PRO shows how a mower without satellite positioning works in the garden. And what happens to the mower and station in winter is covered in our guide to storing a robotic mower over winter (in German).

Our verdict

As a piece of hardware, the Gimisgu garage is well made: well thought out, solid and cleanly finished. But its purpose is to protect a robotic mower, and with our Segway Navimow i105 it fails at that. Under the metal roof there was no satellite reception. The fact that the manufacturer advertises broad compatibility without mentioning the shielding weighs heavily for us. It may work for mowers with a boundary wire. For satellite-guided mowers, it is unsuitable. For us: one out of five stars.

Frequently asked questions

Does the Gimisgu garage work with the Segway Navimow?

Not with our Navimow i105. Under the metal roof, the mower showed no satellite signal at all. The Navimow needs a clear view of the sky for positioning.

Why does a metal garage interfere with reception?

Sheet steel above the mower blocks the satellite signals. Stiftung Warentest, Germany's consumer testing organization, names roofs and canopies as a typical obstacle to reception for robotic mowers with satellite positioning.

Which robotic mowers is the garage suitable for?

It may suit mowers with a boundary wire, because they don't need satellite reception. We have not tried it with mowers that navigate by laser or camera.

How big is the Gimisgu robotic mower garage?

According to the manufacturer, it measures 78 × 60 × 34 cm and is made of 1.5 mm galvanized sheet steel. At 34 cm high, it is on the low side, so measure your mower first.

Which garage is available for the Navimow?

Navimow offers its own plastic garage for the i Series. According to the retailer, it blocks neither signals nor connection. We have not tried it.

Sources

Are you a manufacturer or retailer and would like us to test your product? Offer a product for testing (in German).

Conclusion

The Gimisgu garage seems well thought out and solid. But under the metal roof, our Segway Navimow i105 had no satellite reception at all. The manufacturer advertises broad compatibility and does not mention this limitation. It may suit mowers with a boundary wire, but not satellite-guided mowers. One out of five stars.

Where to buy

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.