This review was first published in German on handgetestet.de.
KFD’s power supply is a replacement unit for Synology NAS devices with four drive bays: 12 volts, 8.33 amps, 100 watts, four-pin plug. We used it to power a NAS. After 25 months, shortly after the two-year statutory warranty that applies in Germany had expired, it developed voltage problems. The NAS no longer worked properly, and a new power supply was necessary. One out of five stars.
Technical data
The values come from the rating label on our power supply and from KFD’s specifications, as of November 14, 2026. We did not measure them ourselves.
| Electrical (rating label) | |
|---|---|
| Model | A90C-120008330 |
| Input | 100 to 240 V AC, 50/60 Hz, max. 1.8 A |
| Output | 12.0 V DC, 8.33 A, 100 W |
| Manufacturer according to the rating label | Shenzhen Huikeyuan Electronic Technology Co., Ltd |
| KFD specifications | |
| Protection circuits | overvoltage, overcurrent and short-circuit protection (OVP, OCP, SCP) |
| Plug to the device | 4-pin DC plug |
| Power cord | with Schuko plug (Type F, standard in Germany) |
| Housing | ABS plastic |
| Compatible according to the listing | including Synology DS925+, DS923+, DS920+, DS918+, DS916+, DS418, DS416 and other DiskStations with 4 bays |
| Origin | China |
What happened to us
The KFD power supply powered our NAS for 25 months. Then it developed voltage problems. The result: the NAS no longer worked properly. A new power supply was necessary.
Why the timing is annoying
In Germany, the statutory warranty on new goods is two years from delivery. Our power supply failed after 25 months, so shortly afterward. At that point, you usually no longer have any claims against the seller. KFD does not mention a longer manufacturer’s warranty in its listing.
Putting it in perspective
A single unit is not a statistic, and other power supplies can fail too. On a NAS, however, the power supply is a critical part: if it no longer delivers clean voltage, the whole device stops running reliably, and with it the data stored on it. KFD states that its products are tested by the manufacturer to meet or exceed the specifications of the original. Ours lasted a little over two years. After this experience, we can’t recommend the brand.
Who might consider a power supply like this
At most, it’s an option for:
- a quick stopgap when the original power supply has failed and the NAS has to be running again right away
We can’t recommend it for:
- anyone looking for a power supply that will run a NAS for many years
- NAS devices that hold important data without a second backup
What you need to know before buying a replacement power supply
- Voltage, current and plug must match the original. KFD itself points out that not all devices are compatible and advises comparing output voltage, output current and plug size with the original power supply.
- The benchmark is the rating label of the original, here 12 V, 8.33 A, 100 W with a four-pin plug.
- If you want to play it safe, ask the NAS manufacturer or a specialist retailer for the matching original power supply.
- If something important runs on your NAS, a spare power supply in the cupboard shortens the downtime.
- More important than any power supply is an up-to-date backup of your data on a second storage device.
- A UPS protects against power outages and disturbances from the grid, not against a faulty power supply.
Related guides
How to back up photos and videos from your NAS as well is explained in our guide NAS for photo and video backup (in German). Which UPS suits a NAS, PC and router is covered in our guide Buying a UPS (in German), and the battery-storage alternative in our guide Portable power station as a UPS (in German). If you’re thinking about a new NAS anyway, you’ll find the models in our guide Buying a NAS (in German).
Where to buy the KFD power supply
Amazon carries the power supply, and the button below links directly to the model. Before buying, compare voltage, current and plug with the original.
Our verdict
The KFD power supply powered our NAS for 25 months and then failed with voltage problems, shortly after the statutory warranty had expired. The NAS no longer ran properly afterward, and we needed a new power supply. For a part that a NAS depends on to run, that’s not good enough. We can’t recommend this brand. Our rating: one out of five stars.
Are you a manufacturer or retailer and would like us to test your product? Offer a product for testing (in German).
Frequently asked questions
How long did the KFD power supply last?
For us, 25 months. Then it developed voltage problems, and the NAS no longer worked properly.
Which NAS devices is the power supply intended for?
According to KFD, for four-bay Synology DiskStations, including the DS925+, DS923+, DS920+, DS918+ and DS418. You should still compare voltage, current and plug with the original.
What are the KFD power supply's ratings?
According to the rating label, input 100 to 240 V at 50/60 Hz, output 12 V, 8.33 A and 100 W, plus a four-pin plug.
How long does the statutory warranty last?
When you buy new goods in Germany, two years from delivery. Our power supply failed after 25 months, so shortly afterward.
Does a UPS protect against a faulty power supply?
No. A UPS bridges power outages and disturbances from the grid. If the power supply itself fails, only a replacement helps. That's why important data also needs a second backup.
Sources
- KFD: power supply 12 V 8.33 A for Synology DiskStation, manufacturer specifications
- German Civil Code (Bürgerliches Gesetzbuch), § 438: limitation period for claims for defects
Conclusion
The KFD power supply powered our NAS for 25 months. Then it developed voltage problems, the NAS no longer worked properly and a new power supply was necessary. The failure came shortly after the two-year statutory warranty in Germany had expired. After this experience, we can't recommend the brand. One out of five stars.
Where to buy
- KFD Netzteil 12 V 8,33 A für Synology DiskStationCheck price at Amazon.de
