Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdicts1,731 guides and reviews in German How we test
handgetestet

Deutsch

Smart Thermometer-Hygrometer 2026: Indoor Climate, App, Matter

Buying a smart thermometer-hygrometer: what humidity the German Environment Agency recommends, what app history, Matter and Thread bring, and which sensor fits.

handgetestet editorial team · Updated November 16, 2026
Contents14 sections

This guide was first published in German on handgetestet.de.

A hygrometer does not prevent mold. It only shows you when to air out the room, and for that you mainly need a history. In most homes, a battery-powered device with app storage such as the SwitchBot Meter Pro is therefore enough. If you already control your home via Matter and Thread, the Aqara Climate Sensor W100 is the better choice.

Why is a simple display often not enough?

A cheap display in the living room shows 52 percent during the day. Reassuring. But the humidity in the bedroom rises to 70 percent at night, and nobody sees it, because no one looks at a display at three in the morning. Only a curve in the history makes such patterns visible.

What humidity is right?

The German Environment Agency (Umweltbundesamt, UBA) recommends keeping the relative humidity of indoor air between 40 and 60 percent to keep the risk of mold low. According to the UBA, even simple hygrometers help you keep an eye on this. The older UBA guide „Schimmel im Haus“ (mold in the home, as of December 2014) states as an upper limit that indoor air should not exceed 65 to 70 percent over the long term, rather less in winter, and no more than 80 percent directly at wall surfaces.

According to the UBA, in winter you should air out two to three times a day, about five minutes per room, with the window wide open. According to the same guide, cabinets on exterior walls should be about ten centimeters away from the wall. Otherwise, the first spot tends to form behind them. No room sensor notices it.

If the value is permanently above 60 percent, a dehumidifier (in German) is the next step. With dry heated air below 40 percent, it is the other way around: then a humidifier is what you need.

How far back should the history go?

Check how long data is stored and whether you can pull a CSV export. 30 days are enough for airing out; two years show whether a wall gets damp every winter.

How accurate does a sensor need to be?

All figures come from the manufacturers. ±2 percent relative humidity is the top end for smart sensors, and ±3 percent is common. For the question „above or below 60 percent“, either is enough.

Bluetooth, Wi-Fi, Thread or Matter?

Bluetooth devices only deliver data when the phone is in range or a hub is running. Wi-Fi sensors send directly to the network but usually need 2.4 GHz and more battery power. Thread is energy-efficient and relays through a network of other devices, but requires a Thread Border Router. With Matter, the sensor appears in Apple Home, Google Home and Alexa at the same time. Sounds good. It only becomes a reason to buy if you are planning automations, for example a dehumidifier that switches on at 65 percent.

Incidentally, a climate sensor does not measure CO2. Only a dedicated CO2 meter (in German) tells you whether stale air is the reason to ventilate.

Six indoor climate sensors compared

ModelConnectionAccuracy according to the manufacturerBest for
SwitchBot Meter ProBluetooth, Matter via SwitchBot Hub 2±2 % RH (10–90 % RH)Most homes, long history
Aqara Climate Sensor W100Thread (Matter) or Zigbee±0.2 °C, ±2 % RHSmart home with Matter and Thread
Eve WeatherThread, Matter±0.3 °C, ±3 % RHOutdoor reading for Apple Home and others
Govee Wi-Fi Thermo-Hygrometer H5179Wi-Fi 2.4 GHz and Bluetooth±0.3 °C, ±3 % RHVacation home, basement without a hub
Govee H5075Bluetooth±0.32 °C, ±3 % RHSmall budget, several rooms
TFA Dostmann VIEW METEO 35.8000.01Wi-Fi station, 868 MHz wireless transmitterno informationAnyone who wants a standalone unit with an outdoor sensor

SwitchBot Meter Pro

SwitchBot cites a Sensirion sensor with ±2 percent relative humidity in the range of 10 to 90 percent. According to SwitchBot, the device runs for up to twelve months on two AA batteries, stores 68 days locally and two years in the app history, and exports as CSV. Matter is only possible via the SwitchBot Hub 2. Usually more of an advantage, because the sensor works sensibly without a hub too.

Aqara Climate Sensor W100

Aqara specifies ±0.2 °C and ±2 percent, plus a 3.4-inch LCD and three buttons that can trigger scenes. In Thread mode, the W100 is added via a Matter code, which requires a Thread Border Router in the home. In Zigbee mode, it goes through an Aqara hub. Without one or the other, it remains just a display.

Eve Weather

Built for outdoors, with IPX4 and air pressure, and an accuracy of ±0.3 °C and ±3 percent according to Eve. It does not necessarily belong in the living room. It supplies the outdoor comparison value, for example for an automation that reminds you to air out more briefly when it is freezing. As a simple Thread device, according to Eve, it does not relay data for others. For Apple Home, it needs an Apple TV 4K or a HomePod as a home hub, and the battery is a CR2450.

Govee Wi-Fi Thermo-Hygrometer H5179

The H5179 connects directly via Wi-Fi and reports thresholds as push notifications, even when you are not at home. Govee cites ±0.3 °C and ±3 percent, 20 days of online storage and an export covering up to two years. According to the manufacturer, three AA batteries last about seven months. Govee does not mention Matter for this model.

Govee H5075

If several rooms need monitoring, this is the cheapest solution. Govee specifies ±0.32 °C and ±3 percent, plus a large LCD and CSV export covering two years. Weak spot: Bluetooth. The readings only reach your phone when you are in range.

TFA Dostmann VIEW METEO 35.8000.01

A classic weather station with indoor climate, dew point and a thermo-hygro transmitter for outdoors, connected via Wi-Fi to the free VIEW app. According to TFA, the app shows 30 days of history, alarm thresholds and push notifications, and up to 50 transmitters can be added. TFA does not state an accuracy. If you want more weather data, you will find alternatives among the weather stations (in German).

Which sensor for which home?

If you suspect mold in a normal apartment, put the SwitchBot Meter Pro in the bedroom or on the critical exterior wall, then watch the history for two weeks. In a smart home with Matter and Thread, the Aqara W100 is a good fit, as long as a Border Router is already in the house. Otherwise, you pay too much extra for the ecosystem.

Several rooms, but little money? Govee H5075 in a multipack; for the basement and vacation home, better the Wi-Fi sibling H5179. If you want to see outdoor values in Apple Home, take Eve Weather as an outdoor sensor and add one of the room sensors indoors. And without a phone, with a standalone unit: TFA VIEW METEO.

For measurement series over weeks, there is our guide to the temperature data logger (in German).

What humidity is still acceptable and where sensors belong is covered in our guide preventing mold with a sensor (in German).

How accurately inexpensive wireless thermometers measure is something we checked with three devices in the same place: review of the Govee H5075 thermometer-hygrometer.

Frequently asked questions

What humidity is right in the home?

The German Environment Agency (Umweltbundesamt, UBA) recommends a relative humidity between 40 and 60 percent to keep the risk of mold low. The older UBA guide states that indoor air should not exceed 65 to 70 percent over the long term. If the value is permanently above 60 percent, a dehumidifier is the next step.

Why is a simple hygrometer display often not enough?

A display only shows the moment. If the humidity in the bedroom rises to 70 percent at night, nobody sees it, because no one looks at three in the morning. Only a curve in the history makes such patterns visible. 30 days are enough for airing out; two years show whether a wall gets damp every winter.

How accurate does an indoor climate sensor need to be?

According to the manufacturers, ±2 percent relative humidity is the top end for smart sensors, and ±3 percent is common. For the question of whether the value is above or below 60 percent, either is enough.

What is the difference between Bluetooth, Wi-Fi and Thread for sensors?

Bluetooth only delivers data within phone range or with a hub. Wi-Fi sensors send directly to the network but usually need 2.4 GHz and more battery power. Thread is energy-efficient but requires a Thread Border Router. Matter brings the sensor into Apple Home, Google Home and Alexa at the same time.

Which sensor suits a basement or vacation home?

The Govee H5179 is a good fit there, because it connects directly via Wi-Fi and reports thresholds as push notifications, even when nobody is on site. Govee cites 20 days of online storage and an export covering up to two years. According to the manufacturer, three AA batteries last about seven months.

Does a climate sensor also measure CO2?

No. A climate sensor records temperature and humidity; CO2 is not part of it. Only a dedicated CO2 meter tells you whether stale air is the reason to ventilate. For the mold question, on the other hand, the humidity history of a room sensor on the critical wall is enough.

Sources

Where to buy

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.