Contents13 sections
This guide was first published in German on handgetestet.de.
When you buy a cordless drill driver, you are really choosing a battery platform. If you already have batteries from Makita, Bosch, Einhell or another brand in the basement, the bare-tool version without battery and charger is almost always the cheapest route. For furniture, shelves and the occasional wall plug hole, a hammer drill driver with 40 to 60 Nm is plenty.
Driving lots of long wood screws? Then add an impact driver with a hex holder. And for concrete, only a rotary hammer will do anyway.
Step one: Which batteries do you already have?
A large part of the price is in the batteries and charger. If you stay with one platform, your drill driver, saw and garden tools all share the same batteries. Our guide Buying a cordless lawn mower shows how that works with lawn mowers.
Bosch has a trap in store. The green DIY tools run on POWER FOR ALL, the blue professional tools on the Professional system, and the batteries are not interchangeable. Same brand, different battery.
Model names trip up many buyers, too. Makita marks the tool without a battery with „Z“, DeWalt with „N“, Milwaukee with „-0“. Einhell, Bosch and Metabo usually write „Solo“ or „without battery“. Before ordering, check exactly what is included.
Step two: Compact or powerful?
The 12-volt tools are shorter and lighter, and you notice that immediately when assembling furniture, working overhead or inside a tight cabinet. 18 volts give you more reserve. On top of that, the range of other tools on the same platform is considerably larger.
Spec sheets usually list two torque values. „Hard“ refers to tightening against metal, „soft“ to driving screws into wood, and it is the soft value that tells you more about everyday use. A high peak figure looks good in a brochure. More useful is a finely adjustable slip clutch, so small screws do not strip.
According to the manufacturers, all of the models below are brushless. There are no carbon brushes to wear out. The promise is more power and longer runtime per battery charge. Two gears are standard, the first for driving screws, the second for drilling. A 13 mm metal chuck comes with good tools.
Step three: Is a hammer drill driver enough?
For brick and masonry, yes. It handles wall plugs up to about 8 or 10 mm. In hard concrete, it quickly reaches its limit; there you need a rotary hammer with a pneumatic hammer mechanism. The impact driver works in a completely different way. Instead of a chuck, it has a ¼-inch hex holder for bits and turns with short blows, which gives it much higher torque. It copes more easily with long wood screws and stuck screws but is only of limited use for drilling. As a second tool, we often consider it more sensible than a stronger drill driver.
Seven tools, seven battery platforms
| Model | Battery platform | Torque according to manufacturer | Type | Best for |
|---|---|---|---|---|
| Bosch UniversalImpact 18V-60 | 18 V POWER FOR ALL (green) | max. 60 Nm | Hammer drill driver | DIYers with Bosch garden tools |
| Einhell TP-CD 18/50-C Li-i BL | 18 V Power X-Change | max. 50 Nm | Hammer drill driver | Beginners on a small budget |
| Makita DHP487 | 18 V LXT | 25 Nm soft / 40 Nm hard | Hammer drill driver | Compact, large battery platform |
| Metabo SB 18 L BL | 18 V CAS | 28 Nm soft / 65 Nm hard | Hammer drill driver | Light and powerful |
| Bosch GSB 18V-55 Professional | 18 V Professional / AMPShare (blue) | 28 Nm soft / 55 Nm hard | Hammer drill driver | Demanding DIYers |
| Milwaukee M12 FPD2 | 12 V M12 | 45 Nm | Hammer drill driver | Installation in tight spaces |
| DeWalt DCF850 | 18 V XR | over 200 Nm | Impact driver ¼“ | Long wood screws, decks, carports |
Bosch UniversalImpact 18V-60: green and connected
It is designed for DIYers. Bosch lists a brushless motor, two gears and up to 60 Nm; according to Bosch, it drills 13 mm in masonry and up to 35 mm in wood. It becomes especially interesting if you already have batteries from the POWER FOR ALL alliance lying around, for example from Bosch garden tools or Gardena.
Einhell TP-CD 18/50-C Li-i BL: a lot of platform for little money
Compact, from Einhell’s Professional line, and 0.99 kg according to the manufacturer. Add to that up to 50 Nm, two gears and 20 torque settings. If the bit catches, an anti-kickback function is meant to reduce the recoil; it can be switched off with a button. The real reason to choose Einhell, though, is Power X-Change, a platform with a very large number of home and garden tools.
Makita DHP487: less torque, hardly a drawback
Makita lists 25 Nm soft and 40 Nm hard for this short 18-volt hammer drill driver. That is less than some competitors offer. For installation jobs around the house, it is usually still enough. According to Makita, it drills up to 13 mm in masonry and steel, and the LXT batteries power many other Makita tools, from lawn mowers to vacuum cleaners.
Metabo SB 18 L BL: small with reserves
Metabo calls it its smallest 18-volt hammer drill driver. Without a battery, it weighs 0.9 kg according to the manufacturer, yet delivers 28 Nm soft and 65 Nm hard. Its batteries come from the Cordless Alliance System (CAS), which several manufacturers share. Compare the order number; older versions have different specs.
Bosch GSB 18V-55 Professional: blue means a different battery
Built for tradespeople. Bosch lists 28 Nm soft and 55 Nm hard, a metal gearbox and a 13 mm metal chuck; according to Bosch, 10 mm is possible in masonry. It takes Bosch Professional 18-volt batteries and AMPShare. The green batteries from the garden shed do not fit.
Milwaukee M12 FPD2: for tight corners
152 mm long, particularly short according to Milwaukee, and still 45 Nm. Kitchen installation, control cabinets, work between beams: that is exactly where the small size of the 12-volt tool pays off. It is available without a battery (FPD2-0) or in kits with 2.0 to 6.0 Ah.
DeWalt DCF850: the specialist for long screws
A pure impact driver with a magnetic ¼-inch hex holder. Over 200 Nm at an overall length of just 100 mm, according to DeWalt. Speed, impact rate and torque each have three settings. If you are laying deck boards, bolting beams together or simply driving lots of long screws, you will not want to be without it next to your drill driver.
The DCF850 is available as the DCF850NT-XJ base version without battery or charger in a T-STAK case.
The short route to the right tool
If you have green Bosch or Gardena batteries on the shelf, get the Bosch UniversalImpact 18V-60 as a bare tool. With Makita in the house, it is the DHP487Z without a battery. If you have CAS batteries at hand, the light yet powerful Metabo SB 18 L BL is the obvious choice. Nothing at all yet? Then the Einhell TP-CD 18/50-C Li-i BL is an affordable entry into a large platform, ideally bought together with a battery. Higher demands and professional accessories lead to the Bosch GSB 18V-55 Professional.
And then there are the special cases. For furniture, kitchens and tight corners, we reach for the 12-volt Milwaukee M12 FPD2; for timber construction and long screws, the DeWalt DCF850, as a second tool next to the drill driver.
Frequently asked questions
How much torque does a cordless drill driver need?
For furniture, shelves and the occasional wall plug hole, a hammer drill driver with 40 to 60 Nm is enough. Spec sheets often list two values: hard for tightening against metal, soft for driving screws into wood. The soft value tells you more about everyday use, and a finely adjustable slip clutch is also useful.
Is 12 volts enough, or should it be 18 volts?
12-volt tools are shorter and lighter, which you notice immediately when assembling furniture, working overhead or inside a tight cabinet. 18 volts give you more reserve, and the range of other tools on the same platform is considerably larger. For tight corners, the guide names the Milwaukee M12 FPD2 at 152 mm long.
Are green and blue Bosch batteries compatible?
No. The green DIY tools run on POWER FOR ALL, the blue professional tools on the Professional system, and the batteries are not interchangeable. The Bosch GSB 18V-55 Professional, for example, uses Bosch Professional 18-volt batteries and AMPShare; the green batteries from the garden shed do not fit.
Can a hammer drill driver drill into concrete?
In brick and masonry, it handles wall plugs up to about 8 or 10 mm. In hard concrete, it quickly reaches its limit; there you need a rotary hammer with a pneumatic hammer mechanism. The hammer drill driver remains the tool for furniture, shelves and installation jobs around the house.
What is the difference between a hammer drill driver and an impact driver?
Instead of a chuck, the impact driver has a ¼-inch hex holder for bits and turns with short blows, which gives it much higher torque. It copes more easily with long wood screws but is only of limited use for drilling. According to the manufacturer, the DeWalt DCF850 delivers more than 200 Nm and works well as a second tool next to the drill driver.
How do you recognize the version without a battery?
Makita marks bare tools with Z, DeWalt with N and Milwaukee with -0. Einhell, Bosch and Metabo usually write "Solo" or "without battery". Before ordering, check exactly what is included, because a large part of the price is in the batteries and charger.
Sources
- Bosch: UniversalImpact 18V-60
- Einhell: TP-CD 18/50-C Li-i BL Solo
- Makita: DHP487
- Metabo: SB 18 L BL (613157840)
- Bosch Professional: GSB 18V-55
- Milwaukee: M12 FPD2
- DeWalt: DCF850
- POWER FOR ALL ALLIANCE: Battery FAQ
- DeWalt DCF850NT-XJ (without battery): product details
Where to buy
- Bosch UniversalImpact 18V-60Check price at Amazon.deAvailable in Germany: Amazon.de
- Einhell TP-CD 18/50-C Li-i BLCheck price at Amazon.deAvailable in Germany: Amazon.de
- Makita DHP487 (Sologerät)Check price at Amazon.deAvailable in Germany: Amazon.de
- Metabo SB 18 L BLCheck price at Amazon.deAvailable in Germany: Amazon.de
- Bosch GSB 18V-55 ProfessionalCheck price at Amazon.deAvailable in Germany: Amazon.de
- Milwaukee M12 FPD2Check price at Amazon.deAvailable in Germany: Amazon.de
- DeWalt DCF850 (Sologerät)Check price at Amazon.deAvailable in Germany: Amazon.de
- DeWalt DCF850NT-XJ (ohne Akku)View at CoolblueAvailable in Germany: Coolblue
