Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Oscillating Multi-Tool 2026: Starlock, Cordless or Corded

Oscillating multi-tools 2026: Starlock, StarlockPlus or StarlockMax, cordless or corded, oscillation angle and accessories. Seven models compared.

handgetestet editorial team · Updated November 17, 2026
Bosch Professional GOP 18V-34 (without battery)Image: Coolblue (Pressebild)
Contents14 sections

This guide was first published in German on handgetestet.de.

With oscillating multi-tools, the motor rarely decides whether you end up with the wrong tool. It is usually the spindle. A tool with a standard Starlock mount will never accept StarlockPlus or StarlockMax blades later on. It still handles trim, joints and corners around the house well, which is why we recommend the Bosch AdvancedMulti 18 to most DIYers. Removing window frames, beams or flooring on a regular basis? Then go straight for a tool with StarlockMax.

Which blades fit which tool?

Starlock is a three-dimensional mount. The blades lock onto it positively, without any screw. There are three performance classes. And one rule that often gets lost: every tool accepts blades of its own class and all smaller ones, but never larger ones. Makita approves all three classes for the DTM52 with StarlockMax. For the Bosch GOP 18V-34 with StarlockPlus, Bosch explicitly rules out StarlockMax accessories. Old blades with an open screw-on system fit none of these tools, as Makita specifically points out.

In everyday use, that means standard Starlock blades take care of wood trim, drywall, silicone and tile joints. The stronger classes are aimed at tough continuous work. For its StarlockMax corded tool, the GOP 55-36, Bosch lists applications such as removing window frames and renovating expansion joints. Einhell gives no Starlock information at all in its data sheet. The only option there is to ask the retailer before buying accessories.

What isn’t clear from the data sheet?

First, the oscillation angle. Some manufacturers state it per side, others as a total. Metabo specifies 1.6 degrees per side, Makita 1.8 degrees per side (3.6 degrees in total), Fein 2 × 2.0 degrees. The larger the angle, the farther the blade travels per oscillation and the better it clears chips from the cut.

The oscillation rate is adjustable on every model here, roughly between 10,000 and 20,000 oscillations per minute. Low for plastic and sanding. High for wood. Tool-free blade changes now come standard on every tool; the differences are in the details, such as a magnet that holds the blade in place or a lever you can still grip with gloves on.

Cordless or corded?

A cordless tool mainly pays off when you already have batteries from the same system in the basement. If you don’t, a corded tool is the more honest choice for continuous work such as tile joints. It doesn’t need a break after twenty minutes.

The system you already own carries more weight than any line in the data sheet. Bosch Professional and Fein use AMPShare batteries, the green Bosch line uses Power for All, Makita uses LXT, and Einhell uses Power X-Change. Which system suits which household is covered in our overview of battery systems.

Seven multi-tools side by side

ModelMountPower source, oscillation angleBest for
Einhell VarritoQuick-release, magnetic, 12 positions18 V Power X-Change, 3.2 degreesOccasional jobs on a small budget
Bosch AdvancedMulti 18Starlock, AutoClic18 V Power for All, 2.8 degreesDIYers with typical renovation jobs
Metabo MT 18 LTX BL QSLStarlock, StarlockPlus18 V, brushless, 1.6 degrees per sideMetabo battery users, frequent use
Bosch GOP 18V-34 ProfessionalStarlock, StarlockPlus18 V AMPShare, brushless, 1.7 degrees per sideTradespeople in the Bosch Professional system
Makita DTM52Starlock up to StarlockMax18 V LXT, brushless, 1.8 degrees per sideMakita users, including rough demolition work
Fein MultiMaster AMM 700 Max ASStarlockMax, QuickIN18 V AMPShare, 2 × 2.0 degreesPros and renovators who want cordless
Fein MultiMaster MM 700 MaxStarlockMax, QuickINCorded, 450 W, 2 × 2.0 degreesLong jobs without battery swaps

Einhell Varrito

Budget-priced and well equipped. Einhell includes a triangular sanding pad, a scraper, plunge-cut and segment saw blades, and a diamond blade for tile joints. Blades are clamped with a magnetic quick-release with twelve positions. The data sheet says nothing about Starlock. For a few joints a year, that hardly matters; for regular work, it certainly does.

Bosch AdvancedMulti 18

Bosch specifies an oscillation angle of 2.8 degrees and 10,000 to 20,000 oscillations per minute. According to the manufacturer, AutoClic swaps accessories in three seconds. The battery belongs to the Power for All Alliance, which other brands have joined as well. What limits the tool is its standard Starlock mount. It is enough for renovating an apartment. Not for demolition.

Metabo MT 18 LTX BL QSL

For this cordless multi-tool, Metabo promises performance that is supposed to come close to a corded tool. Brushless motor, mount for Starlock and StarlockPlus. With the QSL quick-change system, a magnet holds the accessory until it is clamped. The sanding pad measures 93 mm from corner to corner. With Metabo batteries on the shelf, you get a solid tool without starting a second system.

Bosch GOP 18V-34 Professional

According to the manufacturer, the blue Bosch weighs 1.2 kg without a battery. The gear housing is insulated, there is an LED light at the front, and you can change blades with gloves on. StarlockMax accessories are explicitly ruled out. In interior finishing, that rarely matters; when tearing out old timber structures, it is more likely to.

Makita DTM52

Outside the Fein family, the DTM52 is the only cordless tool here with StarlockMax. Makita specifies 1.8 degrees per side and 10,000 to 20,000 oscillations per minute, and accessories can be attached all the way around in 30-degree increments. With the battery, it weighs around 2.0 kg according to the manufacturer, noticeably heavier than the Bosch. If you already work with LXT and have rough jobs ahead of you, you will almost inevitably end up here.

Fein MultiMaster AMM 700 Max AS

Fein positions its MultiMaster at the top end of the price range. According to the manufacturer, the AMM 700 Max oscillates at 2 × 2.0 degrees, the largest angle among the seven tools, and weighs 1.1 kg without a battery. It runs on AMPShare batteries, which also power Bosch Professional tools. For occasional use, you are paying for reserves you will never need.

Fein MultiMaster MM 700 Max

Same StarlockMax mount, same oscillation angle, plus 450 W of input power and a five-meter cord. Weight: 1.6 kg. Regrouting entire bathrooms or scraping adhesive off screed for hours without ever checking a charge level: that is exactly what it is built for.

What do accessories cost in the long run?

You buy the tool once. Blades again and again. An HCS plunge-cut blade is enough for wood and plastic; if there is a nail in the way, you need bi-metal (BIM). Segment saw blades guide straighter along a wall. For tile joints, there are blades with diamond or carbide grit, and the hook-and-loop triangular sanding pad reaches corners no random orbital sander can. Always buy blades that match the tool’s class: a StarlockMax blade simply won’t sit on a Plus tool.

Some jobs are better done with a different tool. Fine engraving and sanding on small parts belong on a rotary tool (in German), long straight panel cuts on a track saw or circular saw (in German). Curves and cutouts are a job for a jigsaw; which one is explained in our jigsaw overview (in German).

Which tool for which job?

  • A few joints and pieces of trim a year, no batteries in the house yet: Einhell Varrito with a Power X-Change battery. Expect compromises when it comes to accessories.
  • Typical renovation in an apartment or house: Bosch AdvancedMulti 18. Starlock covers trim, drywall and joints.
  • Already own Metabo or Bosch Professional batteries: MT 18 LTX BL QSL or GOP 18V-34. Both accept StarlockPlus and are designed for frequent use.
  • Demolition, old floorboards, window frames: a StarlockMax tool. Makita DTM52 in an LXT household, Fein AMM 700 Max with AMPShare.
  • Many hours at a stretch, outlet within reach: Fein MM 700 Max with a cord.

If you only want to regrout a single bathroom, we advise against an expensive StarlockMax tool. The extra cost is too high, the benefit too small.

The Bosch GOP 18V-34 is also available as a bare tool without a battery; Bosch specifies an oscillation angle of 1.7 degrees per side and 1.2 kg without a battery.

According to the manufacturer, the Makita DTM52 accepts Starlock, StarlockPlus and StarlockMax accessories and oscillates at 2 × 1.8 degrees; the DTM52ZJX2 version ships without a battery.

Frequently asked questions

Do StarlockMax blades fit every Starlock tool?

No. Every tool accepts blades of its own class and all smaller ones, but never larger ones. The Makita DTM52 with StarlockMax accepts all three classes. For the Bosch GOP 18V-34 with StarlockPlus, Bosch explicitly rules out StarlockMax accessories. Old blades with an open screw-on system fit none of these tools.

Cordless or corded multi-tool?

A cordless tool mainly pays off if you already have batteries from the same system. If you don't, a corded tool is the more honest choice for continuous work such as tile joints, because it never needs a break. For many hours at a stretch with an outlet within reach, the guide names the Fein MM 700 Max.

What does the oscillation angle tell you?

The larger the angle, the farther the blade travels per oscillation and the better it clears chips from the cut. Be careful when comparing: some manufacturers state it per side, others as a total. Metabo specifies 1.6 degrees per side, Makita 1.8 degrees per side, Fein 2 × 2.0 degrees.

Which multi-tool is enough for occasional jobs?

For a few joints and pieces of trim a year, with no batteries in the house yet, the guide names the Einhell Varrito with a Power X-Change battery. It comes with a sanding pad, scraper, saw blades and a diamond blade. The data sheet says nothing about Starlock, though, so expect compromises when it comes to accessories.

Which saw blade do I need for wood with nails?

An HCS plunge-cut blade is enough for wood and plastic. If there is a nail in the way, you need bi-metal. Segment saw blades guide straighter along a wall, and for tile joints there are blades with diamond or carbide grit. Always buy blades that match the tool's Starlock class.

Is an expensive StarlockMax tool worth it for a single bathroom?

No, we advise against it: the extra cost is too high and the benefit too small. StarlockMax is aimed at tough continuous work such as removing window frames or tearing out old floorboards. For typical renovations in an apartment or house, the standard Starlock mount of the Bosch AdvancedMulti 18 covers trim, drywall and joints.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.