Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet
This page in 6 more languages

DeutschNederlandsFrançaisItalianoEspañolPolski

Robot Vacuum Maintenance: Intervals, Sensors, Limescale, Odor

Robot vacuum maintenance by the manual: how often brushes, filters and sensors need attention, what helps against odors and what limescale in the station means.

handgetestet editorial team · Updated November 17, 2026
Contents14 sections

This guide was first published in German on handgetestet.de.

How much care a robot vacuum needs is decided by the water. Without a washing station, what is left is mainly brushes, filters and a few sensors. That is why the Kärcher RVC 3 Comfort Extra comes first among the devices compared here: its station only empties the dustbin. If you want fully automatic mopping, you buy additional tanks, trays and strainers, and in the manuals that turns into a long table.

How often do I really have to get involved?

More often than the brochures suggest. For the DEEBOT T90 MAX OMNI, Ecovacs schedules the main brush, filter and drip tray weekly; the side brush and the strainer of the washing insert every two weeks; and the sensors, charging contacts, dirty water tank and station base monthly. The clean water tank is due every three months.

Kärcher is vaguer with the RVC 3 and only says „regularly“ for the filter. The manual for the eufy Omni C20 gives no intervals at all. As a stopgap, the table from the manual for the larger eufy X10 Pro Omni does the job: dustbin and filter once a week, brushes and sensors monthly.

What the manuals require for each model

ModelWeeklyMonthlyWet parts
Kärcher RVC 3 Comfort Extrano weekly schedule givenCliff sensorsMopping cloth and 2-in-1 container by hand
DEEBOT T90 MAX OMNIMain brush, filter, drip traySensors, contacts, dirty water tank, stationMop roller, two tanks, washing insert
DEEBOT T30e OMNIMain brush, filterSensors, contacts, dirty water tank, dust chamber, stationMopping pads, two tanks, washing tray
DEEBOT mini 2Main brush, filterSensors, contacts, water tank, dust compartment, stationMopping pads, tank in the robot
eufy Omni C20not specifiednot specifiedMopping pads, two tanks, cleaning tray

What do I clean the sensors with?

Dry. When the „cliff sensors dusty“ message appears, Ecovacs recommends a soft, dry cloth, followed by switching the device off and on again. The charging contacts should explicitly not be treated with a damp cloth, as they contain sensitive electronics. Kärcher also wipes contacts and sensors dry. At Ecovacs, the navigation and obstacle module also belong in the monthly round.

One mistake you should avoid: when changing the brush, do not lay the Kärcher down on its laser sensor; the manual warns against it. Rinsing is off-limits; both Ecovacs and Kärcher prohibit it.

Does the station need descaling?

The answer is inconvenient. The German Cosmetic, Toiletry, Perfumery and Detergent Association (Industrieverband Körperpflege- und Waschmittel, IKW) writes that with hard water, limescale can build up in the tank, lines and pump, and recommends distilled water or regular descaling according to the operating manual. The catch: in the manuals for the T90 MAX OMNI, T90 PRO, T30e, mini, eufy Omni C20 and Kärcher RVC 3, we found no chapter on descaling.

So do not reach for the vinegar bottle. Ecovacs warns against filling the tank with liquids other than those specified and names essential oils, hot water and disinfectants. Kärcher prohibits any cleaning agent in the container because of corrosion. In areas with hard water, you are better off checking with customer service beforehand whether distilled water is permitted.

Why does the station smell?

Because damp dirt sits in it. The IKW names the cause plainly: moisture encourages microorganisms. Its advice is to empty the dirty water container after every use. Ecovacs lists the tank in its table only as „every month.“ Stick to the stricter value, at least in summer. eufy also warns of mold and unpleasant odors if the tank is not emptied regularly.

Then there is the tray in which the mops are washed. Ecovacs recommends taking it out, removing the strainer and rinsing both under running water. Then wipe dry and, when reinstalling, pay attention to the overflow float. Hot air helps but does not replace this: according to the manufacturer, the T90 MAX dries the roller at 45 degrees, while the station of the eufy C20 works with room air.

If you go on vacation, the tanks must be empty and the roller or pads dry. Ecovacs requires this, and the IKW advises leaving the clean water container open. Otherwise a biofilm can form in the tank.

Which faults usually are not faults?

Many error messages can be resolved in a few steps, as the tables show.

  • Station does not empty: in Do Not Disturb mode, the DEEBOT does not empty, nor does it when you return it to the station by hand.
  • „Bag full“ message although it is not: according to Ecovacs, the station has then detected a drop in emptying performance. Check the dustbin and its outlet, and reinsert the bag if necessary.
  • No water from the station: insert the tank level, check the stopper, rinse the strainer in the tank.
  • Not charging: clean the contacts on the robot and the station dry.
  • Clattering or loud suction: check the main brush and dustbin.
  • Kärcher does not start: check the laser sensor, cliff sensors, filter and the fit of the container.

If the message still persists, it is a case for customer service. You should not work on the battery yourself; Ecovacs explicitly prohibits it. Incidentally, Stiftung Warentest (the German consumer testing organization) also rates how laborious and how hygienic these tasks are with robot vacuums. The individual results are behind a paywall.

How do I store the robot?

Charged and dry. Ecovacs wants the battery recharged every six weeks, Kärcher after five months at the latest. When in doubt, go with the shorter interval.

Kärcher RVC 3 Comfort Extra

Vacuuming with a self-emptying station, plus a damp cloth for light dust. No dirty water sits in the station that could smell, and there is no roller and no washing tray. You do, however, look after the cloth and the combined container yourself, and it mops no wetter than barely damp. The manual is brief and leaves schedules open; only for the cliff sensors does it specify once a month. The troubleshooting chapter, on the other hand, is concretely helpful.

DEEBOT T90 MAX OMNI

Maintenance is described point by point. That helps, but it also shows the scope: drip tray, strainer, two tanks, roller. A general comparison of mopping systems can be found in the guide to the robot vacuum with mopping function. A drawback for the running costs: the roller is supposed to be replaced every one to two months, and so is the strainer of the washing insert. It has no warm water for the roller.

DEEBOT T30e OMNI

Similar table, lower price. The mopping pads are supposed to be replaced every one to two months. If you want a station and mopping and do not want to spend much, you accept this upkeep.

DEEBOT mini 2

According to Ecovacs, the compact station dries at 63 degrees. The water tank sits in the robot and needs cleaning monthly. Sensible for small apartments, but the monthly list remains almost as long as with the large devices.

eufy Omni C20

The design with mopping pads does away with the roller, and the pads only need replacing every three months. The weakness lies in the documentation: no intervals, troubleshooting only via the app. Some consolation comes from the transparent tank, which shows you the dirt.

How we would decide

  • Low maintenance matters more than thorough mopping, and light dust can be wiped damp: Kärcher RVC 3 Comfort Extra.
  • Mopping should run automatically, and weekly care is planned for: DEEBOT T90 MAX OMNI.
  • Small budget, but still a station: DEEBOT T30e OMNI.
  • Pads instead of a roller: eufy Omni C20.

This applies among the devices compared here. If you only mop occasionally, a wet-dry vacuum is also worth considering. The stick alternative is covered in the guide to the cordless vacuum.

Frequently asked questions

How often do I need to maintain a robot vacuum with a washing station?

More often than you might think. For the DEEBOT T90 MAX OMNI, Ecovacs lists the main brush, filter and drip tray weekly; the side brush and the strainer of the washing insert every two weeks; and the sensors, charging contacts, dirty water tank and station base monthly. The clean water tank is due every three months.

What do you clean a robot vacuum's sensors with?

With a soft, dry cloth. That is what Ecovacs advises for dusty cliff sensors, followed by switching the device off and on again. The charging contacts should not be wiped with a damp cloth either, because they contain sensitive electronics. Kärcher also wipes contacts and sensors dry; both manufacturers prohibit rinsing them.

Can I descale the station with vinegar?

That is not advisable. Ecovacs warns against filling the tank with liquids other than those specified, and Kärcher prohibits any cleaning agent in the container because of corrosion. The German Cosmetic, Toiletry, Perfumery and Detergent Association (IKW) recommends distilled water or descaling according to the manual. If you have hard water, check with customer service beforehand whether distilled water is permitted.

Why does the robot vacuum's station smell?

Because damp dirt sits in it, and moisture encourages microorganisms. The IKW advises emptying the dirty water container after every use, stricter than Ecovacs' monthly figure. Also take out the washing tray, remove the strainer and rinse both under running water. Before going on vacation, empty the tanks and dry the roller or pads.

What should I do if the station reports that the bag is full?

According to Ecovacs, the station has then detected a drop in emptying performance. Check the dustbin and its outlet, and if necessary reinsert the bag. If the station does not empty at all, Do Not Disturb mode may be the reason. If a message persists, customer service is responsible; you should not work on the battery yourself.

How do you store a robot vacuum for a longer period?

Charged and dry. Ecovacs wants the battery recharged every six weeks, Kärcher after five months at the latest; when in doubt, the shorter interval applies. Tanks should be empty and the roller or pads dry, and according to the IKW the clean water container should be left open so that no biofilm forms.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.