Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet
This page in 6 more languages

DeutschNederlandsFrançaisItalianoEspañolPolski

Advertisement

Buying a Shower System 2026: Rain Shower with Thermostat

Shower system with thermostat: which rain shower suits an electric tankless water heater, what the 38-degree safety stop does and how to reuse old connections.

handgetestet editorial team · Updated November 17, 2026
GROHE Tempesta System 250 with thermostatImage: OTTO (Pressebild)
Contents13 sections

This guide was first published in German on handgetestet.de.

In the catalog, a large overhead shower looks like a hotel bathroom. At home, though, it is your water heater that decides whether you get warm rain or a lukewarm trickle. If you shower with an electric tankless water heater, an economical thermostatic system such as the hansgrohe Crometta S 240 EcoSmart is the safest bet. With a gas boiler or a storage tank, it can use more water. The questions below cover what should be settled before you buy.

Can my tankless water heater handle a rain shower?

That is the most important question, and you can calculate the answer. In the manual for its DHB-ST units, Stiebel Eltron states how much water at 38 degrees is possible per minute. With a cold water inlet at 10 degrees and 400 volts, an 18 kW unit manages 9.2 liters, a 21 kW unit 10.7 liters and a 24 kW unit 12.2 liters. In winter, with 5 degrees at the inlet, the 18 kW unit only manages 7.8 liters.

Now compare. According to hansgrohe, the standard Crometta S 240 lets through up to 16 liters per minute, and the Raindance Alive S Puro 300 12 liters. Both are approved for tankless water heaters, so they will work. Mathematically, though, full flow at 38 degrees in January is not possible with 18 kW; you will turn it down or shower cooler. With 6.7 liters (Crometta EcoSmart) or 7.3 liters (Tempesta 250), there is headroom.

If the tankless water heater acts up with the thermostat, hansgrohe recommends a flow restrictor in the cold water supply in its installation instructions. This happens especially with older hydraulic units.

What does the safety stop at 38 degrees do?

It adds a great deal of safety. The German Environment Agency (Umweltbundesamt) recommends keeping drinking water at the water heater outlet at no less than 60 degrees because of Legionella. Water that hot scalds the skin quickly, especially in children and older people. A thermostat therefore automatically compensates when a toilet is flushed somewhere in the home and the cold water pressure briefly drops. On top of that, there is a button that only lets the handle turn further once it is deliberately pressed. GROHE and Schütte set it at 38 degrees, hansgrohe at 40 degrees. GROHE also includes a limiter for 43 degrees that caps the maximum for good.

A single-lever mixer has none of this. For a family bathroom, that is in our view the strongest reason for a thermostatic system.

How much water does a shower system use?

More than its looks suggest, or considerably less. The German Environment Agency puts conventional shower heads at 12 to 15 liters per minute and water-saving heads at 6 to 9. An example calculation using manufacturer figures: ten minutes under the standard Crometta S 240 means up to 160 liters, under the EcoSmart version 67 liters. For a two-person household, the agency cites savings of around 20,000 liters a year from a water-saving shower head, based on a study by the Öko-Institut, a German research institute.

Incidentally, the diameter of the overhead shower says little about consumption. According to GROHE, the 250-millimeter Tempesta uses less than half the water of the standard version of the 240 Crometta. So look at the liter rating at 3 bar, not at the size.

Will the system fit the old connections?

Usually, yes. Exposed thermostats sit on two S-unions with half-inch threads. hansgrohe specifies a spacing of 150 millimeters with 12 millimeters of play, hot on the left, cold on the right. The upper drill hole is the more interesting part. For the Ceratherm T25 A7701AA, Ideal Standard lists adjustable mounting points and a height of 1,030 to 1,330 millimeters. With hansgrohe, the riser pipe can be shortened at the bottom.

Two notes from the Crometta instructions deserve attention. The installation dimensions are designed for people around 1.80 meters tall. And the wall must be flat where the system is mounted, with no offset between tiles. After the installation, check the fittings; a water leak detector (in German) under the tub will report any drips later on.

Which shower systems are worth considering?

ModelOverhead showerFlow at 3 bar (according to manufacturer)Safety stopBest for
hansgrohe Crometta S Showerpipe 240 EcoSmart240 mm, round6.7 l/min40 °CTankless water heaters, saving water
hansgrohe Raindance Alive S Puro Showerpipe 300300 mm, RainAir or PowderRain12 l/min40 °CLarger overhead shower, more comfort
GROHE Tempesta System 250250 mm7.3 l/min overhead, 5.6 l/min hand shower38 °CEconomical entry point at GROHE
Ideal Standard Ceratherm T25 A7701AAOverhead shower according to data sheet12 l/min overhead, 8 l/min hand showeryesAwkward mounting height
SCHÜTTE TRENTO 60140approx. 30 × 20 cm, squarenot specified38 °CSquare look, user-replaceable thermostat

hansgrohe Crometta S Showerpipe 240 EcoSmart

With a tankless water heater, this is the system we would choose. 6.7 liters per minute according to the data sheet, 1 bar minimum flow pressure, explicitly suitable for tankless water heaters. The overhead shower has only one spray mode. If you are expecting massage jets, you will not be happy here.

hansgrohe Raindance Alive S Puro Showerpipe 300

The new version of the Raindance Showerpipe with a 300-millimeter overhead shower. According to hansgrohe, you can choose between RainAir and PowderRain up top, and the hand shower also has a massage jet. 12 liters per minute, 1 bar minimum flow pressure, approved for tankless water heaters. With a small tankless water heater, that is not enough for full flow in winter.

GROHE Tempesta System 250

A simple system with just one rain spray up top and 7.3 liters per minute. GROHE approves it for tankless water heaters from 18 kW. Thermostat with TurboStat cartridge, safety stop at 38 degrees, 390-millimeter shower arm.

Ideal Standard Ceratherm T25 A7701AA

Its strength is the height-adjustable rail, which according to the data sheet leaves 300 millimeters of leeway. It also has CoolBody, so the thermostat body does not get hot on the outside, and a check valve. The data sheet does not state a temperature for the safety stop.

SCHÜTTE TRENTO 60140

Square overhead shower measuring around 30 by 20 centimeters, safety stop at 38 degrees, anti-limescale nozzles. According to Schütte, you can replace the thermostat element yourself. The manufacturer does not give a flow rate for the set; the intended flow pressure is 1.5 to 5 bar. For tankless water heaters, we would therefore rather go with hansgrohe or GROHE.

How do you keep the overhead shower clean?

Soft nozzles help. hansgrohe calls them QuickClean, GROHE SpeedClean and Schütte anti-limescale nozzles; limescale can be rubbed off with your finger. hansgrohe’s cleaning recommendations are stricter than many people think: no cleaners containing hydrochloric acid, formic acid, chlorine bleach or acetic acid, no abrasive cleaners, no scouring pads, not even microfiber cloths. So household vinegar is out. Rinse off shower gel and shampoo residue with water after showering.

One care tip from the instructions costs nothing. From time to time, turn the thermostat all the way to hot and all the way to cold so the control unit keeps moving freely. According to EN 806-5, the backflow preventers should be checked at least once a year. If you are also replacing the washbasin, our guide to basin faucets (in German) is the natural companion.

Which system suits which bathroom?

  • Electric tankless water heater with 18 to 21 kW: hansgrohe Crometta S 240 EcoSmart or GROHE Tempesta System 250.
  • Gas boiler or large storage tank, and you want a large overhead shower with several spray modes: hansgrohe Raindance Alive S Puro 300.
  • Old drill holes in an awkward place: Ideal Standard Ceratherm T25 with adjustable height.
  • You want a square overhead shower: SCHÜTTE TRENTO, keeping an eye on hot water capacity.

If the bathroom is being stripped down to the bare walls anyway, an in-wall solution is also an option. Our guide to concealed shower systems explains rough-in bodies, thermostats and water requirements.

Frequently asked questions

Can a tankless water heater handle a rain shower?

You can calculate it. According to Stiebel Eltron, an 18 kW unit delivers 9.2 liters of water at 38 degrees per minute with a 10-degree inlet temperature, and only 7.8 liters in winter with a 5-degree inlet. The standard Crometta S 240 lets through up to 16 liters, which is not enough in that case. With 6.7 or 7.3 liters, there is headroom.

Why choose a shower system with a thermostat?

A thermostat automatically compensates when cold water pressure briefly drops, for example because a toilet is flushed. There is also a safety button, set at 38 degrees on GROHE and Schütte and at 40 degrees on hansgrohe. Because the German Environment Agency (Umweltbundesamt) recommends at least 60 degrees at the water heater to prevent Legionella, this protects against scalding, especially for children and older people.

How much water does a shower system use?

The German Environment Agency puts conventional shower heads at 12 to 15 liters per minute and water-saving heads at 6 to 9. Ten minutes under the standard Crometta S 240 means up to 160 liters, under the EcoSmart version 67 liters. The diameter of the overhead shower says little; what counts is the liter rating at 3 bar.

Will a new shower system fit the old connections?

Usually, yes. Exposed thermostats sit on two S-unions; hansgrohe specifies a spacing of 150 millimeters with 12 millimeters of play. The upper drill hole is trickier: on the Ceratherm T25 the mounting points are adjustable, and with hansgrohe the riser pipe can be shortened. The wall must be flat where the system is mounted.

How do you clean an overhead shower properly?

Soft nozzles let you rub off limescale with your finger. hansgrohe advises against cleaners containing hydrochloric acid, formic acid, chlorine bleach or acetic acid, as well as abrasive cleaners, scouring pads and microfiber cloths, so household vinegar is out. Rinse off shower gel and shampoo residue with water after showering.

What helps if the tankless water heater has problems with the thermostat?

In its installation instructions, hansgrohe recommends a flow restrictor in the cold water supply; this happens especially with older hydraulic units. To keep the control unit moving freely, turn the thermostat all the way to hot and all the way to cold from time to time.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.