Contents13 sections
This guide was first published in German on handgetestet.de.
One torque wrench for both car and bike? That almost never works. For changing wheels on a car, we consider the Hazet 5122-3CT with 40 to 200 Nm the solid choice; for the bike, add a separate small wrench up to 20 or 25 Nm, such as the Wera Bicycle Set Torque 1 or the Topeak Torq Stick. The reason is simple. Cube specifies 4.5 to 5 Nm for the stem clamp on its carbon frames, and no workshop wrench for wheel bolts goes that low.
First the range, then everything else
Before buying, write down the values you actually need. For the car, the tightening torque for the wheel bolts is in the owner’s manual, as the ADAC (German automobile club) also points out. On a bike, the values are usually printed on the component itself or in the frame manufacturer’s manual. If your value is close to one end of the scale, go for the next model whose range comfortably includes it.
- Drive: A 1/2-inch square drive takes the sockets for wheel bolts. On a bike, you work with 1/4 inch and bits. If you are missing suitable sockets, our guide to socket sets can help.
- Accuracy: Manufacturers state ±3 or ±4 percent for their click-type wrenches, based on DIN EN ISO 6789. According to Proxxon, electronic models achieve ±1 percent when tightening clockwise.
- Clockwise and counterclockwise: The Hazet 5122-3CT and the Gedore set only release when tightening clockwise. If you need to tighten left-hand threads, look for a reversible ratchet that releases in both directions.
- Paperwork: Most wrenches come with a factory certificate according to DIN EN ISO 6789-2:2017. According to Gedore, an internationally recognized DAkkS calibration certificate (issued under Germany’s national accreditation body) according to ISO/IEC 17025 is only available through an accredited laboratory.
Click or measure?
A click-type wrench briefly breaks over when the set value is reached and clicks audibly. For changing tires twice a year, you don’t need more than that. An electronic wrench, on the other hand, shows the torque actually applied, warns with light, sound and vibration, and can store values. That makes sense if you have to document tightening torques or work on an engine with constantly changing values. For a garage with one car and two bikes, we consider it too much technology. Batteries, display and app are three more things that can fail.
What manufacturers and the ADAC say about safety
After a wheel change, the ADAC advises checking all wheel bolts for the specified tightening torque after the first 50 kilometers. It explicitly lists the torque wrench as standard equipment for this.
With carbon, the margin is small. For the seat clamp on its carbon frames, Cube specifies a maximum of 5 to 6 Nm, applied in stages. The seatpost and seat tube must not be greased; only carbon assembly paste is allowed. A wrench that deviates by 4 percent at 5 Nm lands at 4.8 or 5.2 Nm. That is within tolerance. Estimated freehand with an Allen key, it often is not.
And recalibration? For work according to DIN EN ISO 6789, Stahlwille states twelve months or 5,000 load cycles at the latest, unless otherwise specified. Gedore recommends more frequent checks for safety-relevant connections; Topeak guarantees the accuracy of the Torq Stick for 5,000 cycles and recommends recalibration after that. For storage, Topeak says to turn the Torq Stick back below 4 Nm after each use.
Seven torque wrenches side by side
| Model | Range and drive | Accuracy according to the manufacturer | Best for |
|---|---|---|---|
| Hazet 5122-3CT | 40 to 200 Nm, 1/2 inch | ±3% (clockwise) | Changing wheels on a car |
| Gedore 3550-UK-LS4 | 40 to 200 Nm, 1/2 inch | ±3% | Changing wheels, sockets included in the set |
| Stahlwille 730NR/10QR FK | 20 to 100 Nm, 1/2 inch | ±4% | Motorcycle, suspension, medium values |
| Proxxon MicroClick MC 200 | 40 to 200 Nm, 1/2 inch | according to ISO 6789-1 | Cars, left-hand threads too |
| Proxxon MC 200/E | 20 to 200 Nm, 1/2 inch | ±1% clockwise, ±1.5% counterclockwise | If you document values |
| Wera Bicycle Set Torque 1 | 2.5 to 25 Nm, 1/4 inch | ±4% | Bikes and e-bikes |
| Topeak Torq Stick 4-20 Nm | 4 to 20 Nm, bits | ±4% | Road bikes, carbon parts, on the go |
Hazet 5122-3CT
The 519-millimeter Hazet covers 40 to 200 Nm in 1 Nm increments and, according to the manufacturer, is accurate to ±3 percent when tightening clockwise. It comes with a calibration certificate and serial number, and it releases with a click you can feel and hear. For left-hand threads, Hazet refers to other models. On a car, that hardly matters. That is why it is our top pick for the garage.
Gedore 3550-UK-LS4
Gedore packs the Torcoflex with 40 to 200 Nm, an extension and three impact sockets into one set. According to the manufacturer, accuracy is ±3 percent, and the scale has a vernier with 1 Nm graduations. Here, too, it works only when tightening clockwise. If you don’t yet have suitable sockets for your wheel bolts, the set gives you everything you need in one go.
Stahlwille 730NR/10QR FK
The Manoskop with a permanently built-in ratchet works from 20 to 100 Nm. Stahlwille states ±4 percent and includes a calibration certificate according to DIN EN ISO 6789-2:2017. It does not have to be turned back to zero after use, because the measuring element is only loaded while tightening. Whether 100 Nm is enough for your wheel bolts is revealed by your car’s owner’s manual.
Proxxon MicroClick MC 200
Same range as the Hazet and Gedore, but with a reversing lever for clockwise and counterclockwise rotation. Proxxon calibrates each unit individually and includes a test certificate. The product page gives no percentage for accuracy; it only cites the ISO 6789-1 standard.
Proxxon MC 200/E
The electronic version measures from 20 to 200 Nm with ±1 percent clockwise and ±1.5 percent counterclockwise. It stores ten target values, signals via LED, sound and vibration, and transfers readings to an app via Bluetooth. Three AAA batteries are included. Useful for workshops that have to document their work; in a hobby workshop, usually more than you need.
Wera Bicycle Set Torque 1
At its core is the Click-Torque A 5 with 2.5 to 25 Nm, a 1/4-inch square drive and a 45-tooth ratchet. Wera states ±4 percent according to DIN EN ISO 6789-1:2017, with torque control when tightening clockwise. Added to that are four sockets, seven hex and four Torx bit sockets with a holding function, all in a textile box. For the stem, seat clamp and brake caliper, the set covers the essentials. The most comfortable way to work is in a bike repair stand, because both hands stay free.
Topeak Torq Stick 4-20 Nm
The Torq Stick weighs 187 grams and comes with nine 30-millimeter bits, including hex 3 to 10 and Torx T20 to T30. Topeak states ±4 percent. According to the instructions, it must never be loaded above 15 Nm when loosening bolts, so for stuck bolts you are better off using a regular Allen key. At just under 23 centimeters long, it fits better in the toolbox in your car’s trunk than in a saddlebag.
How we would decide
- Only changing tires on a car: Hazet 5122-3CT, or the Gedore set if you are missing sockets.
- Car with left-hand threads or mixed jobs: Proxxon MicroClick MC 200.
- Motorcycle and medium torques up to 100 Nm: Stahlwille 730NR/10QR FK.
- Documenting values: Proxxon MC 200/E.
- Bikes in the home workshop: Wera Bicycle Set Torque 1.
- Road bike with carbon parts, also on the go: Topeak Torq Stick 4-20 Nm.
If you have a car and a bike, buy two wrenches. There is no other way to cover both ranges of values properly.
Frequently asked questions
Which torque range is right for wheel bolts?
The tightening torque is listed in your car's owner's manual. For changing wheels, the guide recommends wrenches with 40 to 200 Nm and a 1/2-inch square drive. If your value is close to one end of the scale, choose a model whose range comfortably includes it.
Is one torque wrench enough for car and bike?
Almost never. Cube specifies 4.5 to 5 Nm for the stem clamp on carbon frames, and no workshop wrench for wheel bolts goes that low. If you have a car and a bike, buy two wrenches, such as the Hazet 5122-3CT and the Wera Bicycle Set Torque 1 with 2.5 to 25 Nm.
Click-type torque wrench or electronic?
A click-type wrench briefly breaks over and clicks at the set value; for changing tires twice a year, that is enough. Electronic models such as the Proxxon MC 200/E show the actual value and store it. That makes sense if you have to document values; in a hobby workshop, it is usually more than you need.
How accurate are torque wrenches?
For click-type wrenches, manufacturers state ±3 or ±4 percent according to DIN EN ISO 6789; electronic models, according to Proxxon, ±1 percent when tightening clockwise. At 5 Nm and 4 percent deviation, the wrench lands between 4.8 and 5.2 Nm, which is within tolerance.
When does a torque wrench need recalibrating?
Stahlwille states twelve months or 5,000 load cycles at the latest, unless otherwise specified. Topeak guarantees the accuracy of the Torq Stick for 5,000 cycles and advises turning it back below 4 Nm after each use. A DAkkS calibration certificate (German accreditation body) can only come from an accredited laboratory.
Do wheel bolts need retightening after a wheel change?
The ADAC (German automobile club) advises checking all wheel bolts for the specified tightening torque after the first 50 kilometers. It explicitly lists the torque wrench as standard equipment for this. If you need to tighten left-hand threads, look for a model that releases in both directions, such as the Proxxon MicroClick MC 200.
Sources
- Hazet: 5122-3CT
- Gedore: 3550-UK-LS4 Torcoflex UK set
- Gedore: Torque services
- Stahlwille: 730NR/10QR FK
- Stahlwille: Testing, adjusting and calibrating torque wrenches
- Proxxon: MicroClick MC 30 to MC 320
- Proxxon: MicroClick MC 100/E and MC 200/E
- Wera: Bicycle Set Torque 1
- Topeak: Torq Stick 4-20 Nm
- Topeak: Torq Stick 4-20 Nm instructions (PDF)
- ADAC: Changing wheels at home
- Cube: Operating instructions for carbon frames and carbon forks (PDF)
Where to buy
- Hazet 5122-3CTCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Gedore 3550-UK-LS4Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Stahlwille 730NR/10QR FKCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Proxxon MicroClick MC 200Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Proxxon MC 200/ECheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Wera Bicycle Set Torque 1Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Topeak Torq Stick 4-20 NmCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
