Contents12 sections
This guide was first published in German on handgetestet.de.
With airbrushing, people rarely skimp in the wrong place on the airbrush itself. More often on the compressor. One without a tank passes every piston stroke on to the nozzle as a pressure pulse and runs nonstop. If you want to paint plastic models seriously, a dual-action airbrush with a gravity-feed cup and a compressor with a pressure tank and moisture trap belong on your bench, even if the complete kit from the toy aisle looks temptingly cheaper.
Just getting started with kits? Our overview of plastic model kits (in German) explains the basics, and sprue cutters, files and glue are covered under modeling tools (in German).
First fork in the road: single or dual action
With a single-action airbrush, the button only releases the air. You set how much paint comes out beforehand. It is easy to learn, and primer, clear coat and even surfaces work well with it. With dual action, the same trigger controls both: pressing down opens the air, pulling back adds paint. Only that makes soft camouflage edges, shading along panel lines and fine lines possible. Getting used to it takes a few evenings. After that, hardly anyone wants to go back.
- Nozzle: In scale modeling, around 0.3 mm is the usual middle ground. Larger nozzles around 0.45 mm handle primer and thicker paints; finer ones need well-thinned paint.
- Cup: A gravity-feed cup on top of the airbrush works with little pressure. For details, 2 ml is enough; for larger surfaces, 5 to 7 ml is more comfortable.
- Pressure: For most acrylic and enamel paints, Revell specifies 1.0 to 1.8 bar, and 0.8 to 1.0 bar for very fine details. A regulator with a readable scale in this range matters more than high liter figures.
Second fork in the road: the compressor. A tank buffers the piston pulses, and an automatic shut-off lets the motor rest once the pressure is reached. A moisture trap and pressure regulator belong with it. And then there are spare parts. Needles bend and seals age, which is why brands with readily available individual parts are cheaper in the long run.
If you already have a workshop compressor (in German) in the garage, it needs a pressure reducer for airbrushing that can be finely adjusted between 1 and 2 bar. The real question then is whether its noise level and size suit your hobby room.
What goes into the air ends up in your lungs
Even water-based acrylic paint turns into a fine mist when sprayed. The German statutory accident insurance publication DGUV Information 209-082 „Gefahrstoffe im Modell- und Formenbau“ („Hazardous substances in model and mold making,“ February 2024 edition) generally recommends a mask with an A2P2 combination filter for spraying water-based paints, because many water-based products partly contain solvents. For solvent-based paints, it likewise specifies A2P2 and extraction when spraying. The publication is aimed at businesses. For the hobby basement, it is nevertheless the most reliable benchmark we could find.
The safety data sheet for Vallejo Model Air (2019 revision) does not classify the paint as hazardous, but section 8 nevertheless calls for a particle-filtering mask according to EN 149 and recommends safety glasses where there is a risk of splashing. For gloves, the BGHM (German employers‘ liability insurance association for the wood and metal industries) specifies nitrile for paints; it considers fabric or household gloves unsuitable. Before buying thinners or cleaners, read their own safety data sheets. If you paint regularly, a small spray booth vented to the outside is no exaggeration.
Seven candidates for airbrush, compressed air and paint
| Model | Type | Key specs according to manufacturer/retailer | Best for |
|---|---|---|---|
| Harder & Steenbeck Evolution 2024 CRplus 2in1 | Airbrush, dual action | Nozzles 0.28 and 0.45 mm, cups 2 and 5 ml | If you are in it for the long haul |
| Harder & Steenbeck Ultra 2024 | Airbrush, dual action | Nozzle 0.45 mm, cup 5 ml | Getting started with surfaces and primer |
| Iwata Neo CN | Airbrush, dual action | Gravity-feed cup 7 ml, 0.6 to 1.4 bar | Tight budget |
| Fengda AS-186 kit | Kit with compressor | Tank 3 l, shut-off at 4 bar, with airbrush | Complete starter package |
| Revell Master Class compressor | Compressor | 2 cylinders, oil-free, tank 2.5 l, moisture trap | Quiet continuous operation |
| Revell New Basic Set | Kit with mini compressor | Single action, no tank, paints and cleaner included | Occasional surfaces |
| Vallejo Model Air set with cleaner | Paint and cleaner | 6 × 17 ml paint, 85 ml Airbrush Cleaner | First set of paints |
Harder & Steenbeck Evolution 2024 CRplus 2in1
According to the company, Hamburg-based Harder & Steenbeck supplies the 2in1 set with the new 0.28 mm FineLine head and a second set in 0.45 mm, plus cups of 2 and 5 ml. The 0.28 mm head is said to draw finer lines than the old 0.2 mm head and clog less often. That is what the manufacturer says. In terms of price, this airbrush is near the top. In return, a single airbrush covers both priming and camouflage patterns, and spare parts fit into the brand’s modular system.
Harder & Steenbeck Ultra 2024
According to retailers, the Ultra 2024 only comes with 0.45 mm and a 5 ml cup that can also be used as a micro cup. For surfaces, primer and larger scales, that works well. In 1:72, you will soon notice the coarser nozzle.
Iwata Neo CN
Iwata describes the Neo CN as a dual-action gravity-feed airbrush with a 7 ml cup and a recommended working pressure of 0.06 to 0.14 MPa, i.e. 0.6 to 1.4 bar. Retailers list a 0.35 mm nozzle. At Amazon.de (Germany), it costs noticeably less than the Harder & Steenbeck Ultra, and the low working pressure suits small compressors. The selection of spare parts is narrower than with the Hamburg brand.
Fengda AS-186 kit
The manufacturer does not publish a data sheet online; the information comes from retailers. According to them, the oil-free piston compressor has a 3-liter tank, switches itself on and off between 3 and 4 bar and delivers 20 to 23 liters per minute. Airbrush, hose and accessories are included. The contents vary depending on the offer, so check them carefully.
Revell Master Class compressor
Revell describes the Master Class as an oil-free two-cylinder piston compressor with a 2.5-liter tank and moisture trap. According to Revell, the tank evens out the pistons‘ pressure pulses, and the motor shuts off at the set pressure, often around 4 bar. Among hobby compressors, it is one of the expensive ones. If you paint in your apartment in the evening, the money is better spent here than on a second airbrush.
Revell New Basic Set
According to Revell, the case contains a mini compressor with three settings, a metal single-action airbrush, two paints, cleaner, thinner, a mixing cup and a hose with a screw thread. The compressor has no tank. It can handle occasional priming. If you are planning camouflage patterns, you will end up buying a second time.
Vallejo Model Air set with cleaner
Model Air is Vallejo’s acrylic paint line for airbrushing. The safety data sheet states a volatile organic compound content of 0.18 percent by weight. Retailers offer sets with six 17 ml bottles and the 85 ml Airbrush Cleaner. For thorough cleaning, Vallejo recommends soaking only the valve and nozzle for several hours, not the entire airbrush.
The right route for your plans
- Painting for the long term: Evolution 2024 CRplus 2in1 and a compressor with a tank such as the Revell Master Class.
- Budget first: Iwata Neo CN plus a tank compressor. You can save on the airbrush, but you should not on the compressor.
- Everything in one box: Fengda AS-186, after you have checked the contents.
- Only occasional priming: Revell New Basic Set. It is not built for more.
Always add: a mask with an A2P2 filter, nitrile gloves, safety glasses and a cleaner that matches the paint.
Frequently asked questions
Single action or dual action: which airbrush?
With single action, the button only releases the air; the amount of paint is set beforehand. That is easy to learn and is enough for primer, clear coat and even surfaces. With dual action, the same trigger controls both air and paint, and only that makes soft camouflage edges and fine lines possible.
Why does an airbrush compressor need a tank?
A compressor without a tank passes every piston stroke on to the nozzle as a pressure pulse and runs nonstop. A tank buffers the piston pulses, and an automatic shut-off lets the motor rest once the pressure is reached. A moisture trap and pressure regulator belong with it.
Which nozzle size is right for scale modeling?
Around 0.3 mm is the usual middle ground in scale modeling. Larger nozzles around 0.45 mm handle primer and thicker paints; finer ones need well-thinned paint. The Harder & Steenbeck Evolution 2in1 comes with heads in 0.28 and 0.45 mm, covering both.
What pressure do you use for airbrushing?
For most acrylic and enamel paints, Revell specifies 1.0 to 1.8 bar, and 0.8 to 1.0 bar for very fine details. A regulator with a readable scale in this range matters more than high liter figures. A workshop compressor needs a pressure reducer that can be finely adjusted between 1 and 2 bar.
Do you need a mask when airbrushing acrylic paint?
Yes. Even water-based acrylic paint turns into a fine mist when sprayed. For spraying water-based paints, the German statutory accident insurance publication DGUV Information 209-082 recommends a mask with an A2P2 combination filter. Add nitrile gloves, safety glasses and, if you paint regularly, a spray booth vented to the outside.
Is a cheap airbrush kit without a tank enough?
For occasional priming, the Revell New Basic Set with a mini compressor and single-action airbrush can handle it. It is not built for camouflage patterns; in that case, a second purchase will follow later. As a complete package with a 3-liter tank, there is the Fengda AS-186, whose contents vary depending on the offer.
Sources
- Harder & Steenbeck: Evolution 2024 CRplus
- Iwata: NEO for Iwata CN
- Revell: Master Class compressor
- Revell: New Basic Set
- Vallejo: Model Air safety data sheet
- DGUV Information 209-082: Hazardous substances in model and mold making (German publication)
- BGHM: Arbeitsschutz Kompakt 061, Working with paints and coatings (German publication)
Where to buy
- Harder & Steenbeck Evolution 2024 CRplus 2in1Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Harder & Steenbeck Ultra 2024Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Iwata Neo CNCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Fengda AS-186 SetCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Revell Kompressor Master ClassCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Revell New Basic SetCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Vallejo Model Air Set mit CleanerCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
