Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Conference Chairs: Choosing Stacking, Padding and Dimensions

Buying a conference chair: stackable or cantilever, which dimensions the German DGUV names, how heavy a chair may be. Six models with manufacturer specifications.

handgetestet editorial team · Updated November 17, 2026
hjh K9 V PROImage: buerostuhl24 Bürostühle und Büromöbel (Pressebild)
Contents12 sections

This guide was first published in German on handgetestet.de.

The most expensive mistake at the conference table is a chair that only works for one room layout. Should the room sometimes be empty or set up differently? Then stackability beats every design argument. For most meeting rooms, we therefore start from the hjh K9 V PRO: light, stackable up to eight chairs high, and according to the manufacturer rated for up to 180 kilos. If the seating always stays the same, the BRETON V B with armrests is more comfortable.

Meetings mean sitting longer than you think

People often cut corners on the visitor chair, because nobody actually works there. The DGUV Grundsatz 315-411 from the German Social Accident Insurance sees it differently. Even for seating used only for short periods, it says, ergonomics and comfort are among the key points, and the selection should be made with the same care as for an office work chair.

An annual planning session simply takes three hours. And anyone who sits through it on a hard shell ends up saying less.

Specifically, the Grundsatz names these values, which you can compare directly with any data sheet:

  • Seat height between 40 and 50 centimeters if it is fixed
  • Seat width at least 40 centimeters, seat depth at least 40 or 42.5 depending on the measurement standard
  • Top edge of the backrest at least 36 centimeters above the seat
  • Armrests, if present, 20 to 25 centimeters high, with a clear width of at least 46 centimeters

In addition, targeted lumbar support and a padded seat are among the requirements. Armrests should be offered, because they relieve the shoulders and help when getting up. Casters are rarely needed there. Glides are enough if nobody has to roll back and forth at the table.

Four questions before you count

How often is the room rearranged? Once a year or every week? According to the Grundsatz, stacking chairs should be as light as possible; for row seating, it names 8 kilos as the limit. If one person pushes 20 chairs into the corner, they feel every kilo. The PARMA V weighs 19 kilos. The K9 V PRO 6.7.

How heavy may guests be? The Grundsatz requires observing the manufacturer’s specification for user weight. In a client room, you do not know who will come. A limit of 100 kilos, as also found in stores, is too tight there. 150 or 180 kilos take the worry away.

Does the chair fit under the table? Chairs with armrests need clearance under the tabletop. Measure the armrest height and add the seat height: for the BRETON V B, that is 47 plus 21, so 68 centimeters. With a table height of 72 centimeters and an apron, things get tight.

Is there enough space in the room? The DGUV Information 215-441 allows 80 centimeters of width for each meeting seat, 70 in exceptional cases. A wide chair with an outer width of 62 centimeters fits in well, but only if you are not trying to put eight chairs at a table for six. How to calculate the table itself is covered in the guide to the conference table.

Cantilever or four-legged

A cantilever chair has some spring to it. On the BRETON V B, the seat gives under your weight and tilts slightly backward, which makes long meetings more comfortable. In return, it usually cannot be stacked, and the frame needs more depth on the floor.

Four-legged chairs are the sober choice. They stack and weigh little. Without armrests, they move closer to the table, but they offer no support. That is right for training sessions and team rooms. In a room where you discuss contracts with clients, it quickly feels like a cafeteria.

Six chairs compared

Prices appear automatically from retailer data. All dimensions according to the manufacturer. hjh OFFICE sells to private customers through buerostuhl24 (German retailer), so data and offer come from a single source.

ModelSeat (H / W / D)StackableWeight, loadBest for
hjh K9 V PRO46 / 44 / 46 cmyes, up to 86.7 kg, 180 kgRooms that get rearranged
hjh XT 600 XL46 / 52 / 50 cmyes, up to 46 kg, 150 kgTraining, wide seat
hjh BRETON V B47 / 48 / 49 cmno10.9 kg, 120 kgfixed group, long meetings
hjh INVENTOR V46 / 48 / 45 cmno9.1 kg, 150 kgLumbar support
hjh PARMA V46 / 52 / 46 cmno19 kg, 120 kgBoardroom, leather
hjh BEGIO43 / 40 / 44 cmno4.2 kg, 120 kgshort meetings, living area

hjh K9 V PRO

The reinforced metal frame and fabric cover make it the workhorse. Hjh specifies a sitting duration of 8 hours, compared with 4 for each of the other five chairs here. It has no armrests, it meets the dimensions from the Grundsatz on paper, and up to eight chairs can be stacked on top of each other. Check stability when stacking and treat the figure as an upper limit.

hjh XT 600 XL

It is the affordable classic for training rooms. Wide seat, padded backrest, stackable up to four chairs, plastic glides. At 41 centimeters, the backrest is lower than on the K9. For half a day of training that is fine; for the fall budget meeting, it would be too little for us.

hjh BRETON V B

Mesh back, armrests, matte black cantilever frame. The backrest measures 60 centimeters, well above the minimum. If you keep guests at the table for three hours, this gives them the most comfortable seat. Hjh names hard floors as the intended surface. On carpet, ask first.

hjh INVENTOR V

Here the lumbar support is explicitly built in, as the Grundsatz requires. At 19 centimeters, the armrests sit just below the 20 to 25 range. With a load capacity of 150 kilos, a well-rounded choice for mixed groups.

hjh PARMA V

Leather on seat and backrest, chrome-plated frame. The outer parts are made of polyurethane. 19 kilos is a lot for a chair. The weight argues against any rearranging and for a room that stays as it is.

hjh BEGIO

A plastic shell on four legs, more kitchen than conference. At 35 centimeters, the backrest falls just short of the minimum, and there is no padding. For fifteen minutes at a standing coffee break that works; for a meeting, it does not.

What we would do in your place

First count how often the room is rearranged. More than once a month: K9 V PRO, or XT 600 XL if the budget is tight. If the table is always occupied and you sit for a long time, the BRETON V B is the right fit. We would only take the PARMA V for the one room where impressions really count. Good lighting and a conference speakerphone often do more for a room than an expensive chair.

One last note: the specifications for these six chairs do not mention a GS mark (the German „tested safety“ mark), which the Grundsatz requires for all products. Ask about it if you are buying for a company.

Frequently asked questions

What dimensions should a conference chair have?

The DGUV Grundsatz 315-411 (a German workplace safety principle) specifies, for a fixed height, a seat height of 40 to 50 centimeters, a seat width of at least 40 centimeters and a backrest top edge at least 36 centimeters above the seat. Armrests should be 20 to 25 centimeters high with a clear width of at least 46 centimeters.

How heavy can a stackable conference chair be?

According to the Grundsatz, stacking chairs should be as light as possible; for row seating it names 8 kilos as the limit. If you push 20 chairs into the corner, you feel every kilo. The K9 V PRO weighs 6.7 kilos, while the PARMA V weighs 19 kilos, which rules out any rearranging.

Does a chair with armrests fit under the conference table?

Add up seat height plus armrest height. For the BRETON V B, that is 47 plus 21, so 68 centimeters. With a table height of 72 centimeters and an apron, things get tight. Without armrests, chairs move closer to the table, but they offer no support.

Cantilever or four-legged chair for the meeting room?

A cantilever chair has some give and makes long meetings more comfortable, but it usually cannot be stacked and needs more depth. Four-legged chairs stack and weigh little, which suits training and team rooms. In a client meeting about contracts, it quickly feels like a cafeteria.

How much weight should a conference chair be able to take?

The Grundsatz requires observing the manufacturer's specification for user weight. In a client room you do not know who will come, and a limit of 100 kilos is too tight there. 150 or 180 kilos take the worry away, for example with the INVENTOR V or the K9 V PRO.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent.