Black Friday Woche läuft bis 30.11.: our pick in each buying guide
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,745 guides and reviews in German How we test
handgetestet

Buying an electric fireplace in 2026: water vapor or LED flame, with or without heating, built-in or freestanding, and what flame and fan heater cost in electricity.

handgetestet editorial team · Updated November 16, 2026

Editorial selection based on research, not tested by us. Reasons and limitations are in the text.

Contents13 sections

This guide was first published in German on handgetestet.de.

An electric fireplace that is mainly supposed to heat is an expensive fan heater with decoration. It’s that simple. If you’re after ambience and only want to add a little warmth on cool evenings, a water vapor fireplace like the Dimplex Evandale gives you the most convincing flame effect. If the main goal is to style a wall on a small budget, Klarstein delivers LED flames with a fan heater for a fraction of the price.

Wood fires are a different topic, with a chimney, a chimney sweep and emission limits. We cover that in our wood stove (in German) guide. This guide is exclusively about units that plug into an outlet. Real flames without a chimney are covered in our bioethanol fireplace (in German) guide.

LED or water vapor: what’s the difference?

Two technologies share the market. LED fireplaces project light onto a moving surface or film. From the front, that looks decent. From the side, flat. Water vapor fireplaces („Optimyst“ at Dimplex, „Opti-Myst“ at Glow Fire) use ultrasound to turn water into a cold mist that LEDs light from below, and this mist rises between the artificial logs with real depth. That’s why these units cost considerably more.

How much maintenance does the mist need?

More than an LED, but manageable. For Optimyst units, Dimplex specifies eight to ten hours of operation per tank filling, recommends filtered water because limescale disables the atomizer, and explicitly advises against deionized water. Water should not sit unused in the unit for more than two weeks, and it is cleaned about every two weeks. According to the manufacturer, the air hardly gets more humid in the process, about as much as one additional person in the room. So it’s not a humidifier.

What does it cost to run?

It only gets expensive with the heater. Almost all models with a heating function have a fan heater with 1,000 and 2,000 watts (Klarstein Galeras: 900 and 1,800 W). One hour on full power is 2 kWh. At 35 euro cents per kWh, that comes to around 70 cents per hour. Every kilowatt-hour of heat costs a kilowatt-hour of electricity; there’s no trick. The flame alone, on the other hand, is cheap. Dimplex specifies 200 watts for Optimyst fires in flame-only mode, so about 7 cents per hour at the same electricity price, and Faber specifies 250 watts for the e-MatriX 800/500 I. According to the manufacturers, LED fireplaces need considerably less. The exact value is in the data sheet of each model, and it varies widely.

In 2022, Stiftung Warentest, Germany’s leading consumer testing organization, ran the numbers on electric supplementary heaters and considers fan heaters suitable only for short periods because they can overheat in continuous operation. Applied to the electric fireplace, that means: warmth on cool evenings, yes; a replacement for central heating, no. And if it’s really just you who wants to get warm, a heated blanket (in German) sits at the other end of the consumption scale.

Which outlet, which spot?

A unit with a 2,000-watt heater belongs directly in a wall outlet. The Interior Ministry of the German state of Baden-Württemberg explicitly lists fan heaters among the devices that should not be plugged into power strips: the strips are rated for about 3,000 to 3,500 watts, and the heater alone draws up to 2,000 watts. Tip-over and overheat protection should be a given for freestanding models; Klarstein specifies both for its current units.

Freestanding means: unpack, plug in, done. Built-in means planning. For built-in fireplaces, Dimplex recommends a sturdy frame, an outlet nearby, air space around the unit and, ideally, connection by a qualified professional. In a media wall, the heat has to be directed away from the TV. Larger water vapor inserts like the Faber e-MatriX also run on a fixed water connection (0.5 to 8 bar, 0.15 liters per hour according to the data sheet). That’s a job for an installer and a specialist dealer, not for a Saturday afternoon.

Five electric fireplaces available on Amazon

ModelFlameDesignHeatingBest forOffer (affiliate link)
Dimplex Evandalewater vapor (Optimyst)freestanding stove1,000/2,000 Wstove look without renovationAvailable in Germany: Amazon.de
Dimplex Cassette 400/600 LEDwater vapor (Optimyst)insert for a recessnoneexisting recess, looks onlyAvailable in Germany: Amazon.de
Glow Fire Herawater vapor (Opti-Myst)freestanding fireplace with wooden surround1,000/2,000 Wa large eye-catcher in the living roomAvailable in Germany: Amazon.de
Klarstein Galeras SmartLEDwall-mounted fireplace, 12 cm deep900/1,800 Wsmall budget, flat wallAvailable in Germany: Amazon.de
Klarstein Studio Light & Fire SmartLEDfireplace with mantel1,000/2,000 Wplug-in fireplace surroundAvailable in Germany: Amazon.de
Want a second opinion before buying?Ask via WhatsApp

Dimplex Evandale

Compact, with an Optimyst flame, LED lighting and a two-stage fan heater with 1,000 and 2,000 watts. The stove needs no recess and no contractor, and the flame also runs without the heater. That’s why it’s our pick. A water vapor flame with real depth, without any construction work. With a footprint of around 44 × 58 cm according to the listing, it also fits in a corner of the room. On Amazon, it comes in several colors, not all of which are always in stock.

Dimplex Cassette 400/600 LED

A pure flame insert without heating, designed for an existing recess or a disused fireplace. It makes sense where the room is warm enough and only the look is missing. Without a fan heater, consumption stays in the range of the atomizer and lighting.

Glow Fire Hera

Glow Fire places an Opti-Myst insert in a wooden surround measuring 126 × 110 × 32 cm according to the listing. According to the manufacturer, the heater can be set to 1,000 or 2,000 watts or switched off completely. This is a piece of furniture. Not an accessory. In price, the Hera sits far above the Evandale, and what you’re mainly paying for here is size and surround.

Klarstein Galeras Smart

This wall-mounted fireplace with LED flames is only 12 centimeters deep, and Klarstein offers it in widths between 102 and 178 cm. Add a two-stage heater with 900 and 1,800 watts, thermostat, timer, app and remote; the flame runs independently of the fan. The flame effect is flatter than with water vapor. In a rental apartment where nothing is supposed to be built in, we consider it the sensible compromise.

Klarstein Studio Light & Fire Smart

A fireplace surround with mantel and an inserted LED fire, heating with 1,000 and 2,000 watts, thermostat and programmable timer. Klarstein specifies overheat protection and a tip-over switch that stops the heater if the unit falls over. Visually more classic than the Galeras. Technically in the same league.

And what about Faber?

The Faber e-MatriX series is the premium class among built-in water vapor fireplaces, with a fixed water connection and up to 2 kW of heat output. We didn’t find it on Amazon. It is sold through specialist fireplace dealers, who also plan the installation.

Which fireplace suits you?

The Dimplex Evandale offers a real flame effect without renovation, but refilling the tank and regular cleaning come with it. With little money, a flat wall and a rental apartment, the Klarstein Galeras Smart remains the choice. The LED flame is, honestly, a backdrop, but it’s economical and maintenance-free. If the fireplace is meant to be a large piece of furniture and size matters more than price, the Glow Fire Hera is an option. If you already have a recess, install the Dimplex Cassette 400/600 LED; larger projects with a water connection belong in the hands of a specialist dealer. And if you mainly want to heat? No electric fireplace. Electricity is too expensive for that.

What your own unit actually draws in flame mode is shown by a smart plug with energy monitoring (in German). For heating mode, its data sheet must show that it is rated for the full load.

Frequently asked questions

What's the difference between an LED and a water vapor fireplace?

LED fireplaces project light onto a moving surface or film, which looks decent from the front and flat from the side. Water vapor fireplaces use ultrasound to turn water into a cold mist that LEDs light from below. This mist rises with real depth, which is why these units cost considerably more.

How much electricity does an electric fireplace use?

It only gets expensive with the heater: at 2,000 watts, one hour on full power is 2 kWh, which at 35 euro cents per kWh comes to around 70 cents. In flame-only mode, Dimplex specifies 200 watts for Optimyst fires, so about 7 cents per hour. According to the manufacturers, LED fireplaces need considerably less.

Can an electric fireplace replace my heating?

No. Every kilowatt-hour of heat costs a kilowatt-hour of electricity. Stiftung Warentest, Germany's leading consumer testing organization, considers fan heaters suitable only for short periods because they can overheat in continuous operation. For an electric fireplace, that means: warmth on cool evenings, yes; a replacement for central heating, no.

How much maintenance does a water vapor fireplace need?

Dimplex specifies eight to ten hours of operation per tank filling and recommends filtered water, because limescale disables the atomizer, but explicitly advises against deionized water. Water should not sit unused in the unit for more than two weeks, and it is cleaned about every two weeks.

Can an electric fireplace be plugged into a power strip?

A unit with a 2,000-watt heater belongs directly in a wall outlet. The Interior Ministry of the German state of Baden-Württemberg lists fan heaters among the devices that should not be plugged into power strips, as these are rated for about 3,000 to 3,500 watts. Freestanding models should have tip-over and overheat protection.

What should I consider when installing a built-in electric fireplace?

Built-in means planning. Dimplex recommends a sturdy frame, an outlet nearby, air space around the unit and connection by a qualified professional. In a media wall, the heat has to be directed away from the TV. Larger inserts with a fixed water connection are a job for an installer and a specialist dealer.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.

Still undecided?

Keep comparing at your own pace – every article in this category is checked monthly for new and discontinued models.

Share this guide