Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet
This page in 9 more languages

DeutschNederlandsFrançaisItalianoEspañolPolskiУкраїнськаTürkçeالعربية

Advertisement

Gutter Guards: Leaf Basket, Mesh or Brush? 9 Options Compared

Cover the whole gutter or just protect the outlet? Leaf baskets, downspout strainers, mesh and brushes compared, with tips on pipe size and maintenance.

handgetestet editorial team · Updated November 16, 2026
Guide: gutter guards, leaf basket, mesh or brush? 9 options
Contents17 sections

This guide was first published in German on handgetestet.de.

Leaves in the gutter are not a cosmetic issue. If the downspout clogs, water spills over the gutter, runs down the facade and, in winter, turns into icicles. Two approaches protect against this: you cover the whole gutter with mesh or brushes. Or you only protect the spots where water flows into the downspout. On long gutters, the second approach is cheaper and quicker. Our pick for it is a basket made of perforated stainless steel, such as the one from KOVSGQ for 100 mm downspouts. It also catches stalks, twigs and nesting material that slip through a wire basket.

Why leaves in the gutter can get expensive

A few leaves in the gutter? No problem. The danger is at the outlet. Always. That is where leaves, small branches, moss and, in spring, blossoms and seeds collect until the outlet is blocked. Then there is what birds drop: sparrows like to nest under the eaves and carry in stalks, grass and twigs, some of which end up in the gutter. RHEINZINK, one of the major gutter manufacturers, describes the consequences: water overflows, soils the facade and can even lead to mold inside the home. In freezing weather, dangerous icicles form. Once the plug is lodged in the downspout or the underground drain, cleaning becomes laborious and expensive.

Cover the whole gutter or just protect the outlet?

Full length: Gutter mesh or gutter brushes lie in the gutter along its entire length. The leaves stay on top, dry out and, at best, get blown away by the wind. The gutter itself stays clean. In return, you need material for every meter. On a house with long gutters, that quickly adds up to 20 or 30 meters, and every piece has to be laid in from a ladder.

Spot protection: A wire basket is pushed into the outlet from above, right where the gutter connects to the downspout. Water flows through. Leaves and branches stay in front of it. One basket per downspout is enough, usually two to four per house. The gutter itself still gets dirty; only the downspout stays clear.

In the downspout: A downspout diverter flap with a strainer sits in the downspout at hip height. Leaves coming down the gutter land in the strainer, and you empty it from the ground, without a ladder. If you already collect rainwater for the garden, you get both in one part.

What a basket in the outlet can and cannot do

The basket shifts the work. It does not take it away. Instead of in the downspout, leaves now collect around the basket. If a dense mat of wet leaves builds up there in the fall, water backs up in the gutter and overflows, just as with a clogged pipe. The difference: you can see it, and one reach from the ladder is enough instead of unscrewing the downspout.

In the fall, that means checking the baskets regularly, every week if trees stand right next to the house. One manufacturer also points out that its basket changes the drainage capacity according to EN 12056, the European standard for gravity drainage. Of course, any insert slows the water down a little. In heavy rain this hardly matters, as long as the basket is clear.

Wire or perforated sheet: how fine does the basket need to be?

The classic baskets are made of bent wire. Between the bars there are gaps of several centimeters. Whole leaves? Caught. Stalks, blades of grass, thin twigs and bird nesting material, however, slip through and can snag farther down in the downspout. That is exactly where a plug is hardest to reach.

Perforated sheet is finer. It is a stainless steel sheet with lots of small round holes, with a lid on top and a conical body on the side. Water runs through the lid and sides, while stalks and small twigs stay out. Caps made of wire mesh are finer still. The finer the filter, however, the faster it clogs with wet leaves. With perforated sheet, water still runs through the sides even when the lid is covered. You still have to check it more often than a coarse wire basket.

Measure first: downspout and gutter

For the basket, what counts is the diameter of the downspout, not the gutter. On single-family homes in Germany, 87 mm and 100 mm are common, with smaller sizes on garages and garden sheds. Many baskets can be squeezed together and wedge themselves in the pipe; the one from greate, for example, fits between 87 and 100 mm. For mesh and brushes, by contrast, the gutter is what counts. RHEINZINK specifies the size of half-round gutters as a nominal size, such as 250, 280 or 333. The number is the width of the sheet before bending, in millimeters, not the diameter. A gutter with a nominal size of 25 cm is therefore only just over 10 cm wide. Retailers usually pair it with 76 or 80 mm downspouts, and with plastic systems also 100 mm. For a size 250 zinc gutter, a basket for 68 to 83 mm usually fits, which according to the listing grips pipes with an inner diameter of 70 to 81 mm, meaning 76 and 80 mm downspouts. Brush manufacturers give the diameter in centimeters. According to MEISSNER, brushes that are too thick push themselves out of the gutter, and ones that are too thin get blown out by the wind.

And the material? Copper and zinc do not mix, because water that runs over copper attacks zinc and galvanized steel below it. For its brushes with galvanized wire, MEISSNER explicitly states that they belong only in galvanized or plastic gutters, not in copper or stainless steel gutters. Stainless steel baskets are considered the least complicated choice for most gutters. With copper gutters, ask your roofer if in doubt.

Nine options compared

ModelPrincipleSize and material according to listingBest for
KOVSGQ perforated sheet leaf basketfine basket in the outlet90 to 110 mm (pipe inner diameter 92 to 108 mm), 304 stainless steelcatching stalks, twigs, nesting material
RIRIDAMAI perforated sheet leaf basketfine basket, 2 pieces100 mm at the top, 85 mm at the bottom, 304 stainless steelthe same for downspouts around 87 mm
Grömo stainless steel leaf strainer DN100basket in the outlet or downspout100 mm downspout, stainless steel, 2 mm wirecoarse leaves, infrequent checks
greate downspout leaf guardbasket, compressible87 to 100 mm, galvanized or stainless steel, made in Germanyif you do not know the exact pipe size
EKNA downspout leaf guardplastic basket, 4 piecesØ 13 × 14.5 cm, rustproofsmall budget, garage, garden shed
XIRUYEN downspout leaf guardfine mesh cap, shaped with cable ties, 6 pieces3 to 8 cm individually, 8 to 15 cm combined, aluminumif you also want to catch small leaves
Zambelli downspout diverter flap with strainerstrainer in the downspout, flap for rain barrel100 mm downspout, titanium zincemptying leaves from the ground, collecting rainwater
INEFA gutter meshmesh along the full lengthgutter 100 to 125 mm, 3 m, polyethylenegutters under deciduous trees
MEISSNER gutter brushesbrush along the full length10 × 100 cm, Ø 12 cm, galvanized wireconifers, also against birds and martens

KOVSGQ perforated sheet leaf basket

A conical basket made of 304 stainless steel with a perforated lid and perforated body. According to the listing, it fits downspouts with an inner diameter of 92 to 108 mm, meaning the common 100 mm pipe. It slides into the outlet without tools, and the conical shape holds it in place. The holes are small enough that stalks, grass and thin twigs stay on top. On Amazon, it was rated 4.5 out of 5 stars on 14.11.2026. The brand is barely known in Germany, but the design is solid and well thought out, entirely in 304 stainless steel: no fiddling with cable ties, no wire that bends. Our pick when nesting material and small debris are in play. Handy: the same basket comes in many sizes, such as 68 to 83 mm (pipe inner diameter 70 to 81 mm), 75 to 90 mm (pipe inner diameter 77 to 88 mm) and 90 to 110 mm, singly or as a two-pack.

RIRIDAMAI perforated sheet leaf basket

The same design as a two-pack, 100 mm wide at the top and 85 mm at the bottom, for outlets of 87 to 97 mm according to the listing. Besides leaves, the manufacturer also mentions needles and birds that should stay out. For the smaller 87 mm downspout, this is the right choice. Measure the inner diameter first, otherwise the basket will sit too loosely or not at all.

Grömo stainless steel leaf strainer DN100

A bent stainless steel wire basket made of 2 mm wire, which according to the listing is wedged into the downspout or the gutter outlet. Grömo manufactures gutters and accessories itself, so the strainer comes from specialists. Stainless steel does not rust. It suits most gutters. The catch: there is a lot of space between the wire bars. Whole leaves get caught, while stalks, grass and thin twigs slip through. Where only coarse leaves fall, it is the most robust solution and the one that clogs least often.

greate downspout leaf guard

The basket is squeezed together at the bottom, pushed into the pipe and spreads out to wedge itself in place. According to the manufacturer, it fits downspouts from 8.7 to 10 cm and is made in Germany. On Amazon it comes galvanized in a four-pack, at OTTO (German retailer) in stainless steel as a single piece. Handy if you cannot tell for sure from the ground whether the pipe measures 87 or 100 mm.

EKNA downspout leaf guard

Four plastic baskets, each 13 cm wide and 14.5 cm tall. They are installed like the wire baskets: squeeze together, push in. Plastic does not rust and does not react with any gutter material. On the other hand, it is likely to become more brittle in the sun over the years than stainless steel. For a garage, carport or garden shed, the set is an inexpensive choice.

XIRUYEN downspout leaf guard

Six round aluminum screens with fine mesh, plus 15 cable ties. You use the cable ties to shape the screen into a cap that is wider at the top and narrower at the bottom, and set it in the outlet. According to the listing, one cap fits pipes from 3 to 8 cm, and two combined fit 8 to 15 cm. The fine mesh also holds back small leaves and seeds that slip through a wire basket. But that is also its weakness: fine mesh clogs with wet leaves faster than a wire basket, and then the water backs up. The cable ties are also plastic, which ages in the sun.

Our verdict: useful and inexpensive if you can check the caps often in the fall, for example on a garden shed that is easy to reach. On Amazon, it had an average rating of 4 out of 5 stars on 14.11.2026. On a high, long gutter, we would prefer the perforated sheet basket. It filters almost as finely but fits without any fiddling and keeps its shape. Aluminum also does not belong in copper gutters.

Zambelli downspout diverter flap with strainer

A molded part made of titanium zinc that is fitted into a 100 mm downspout. When you open the flap, the water runs into the rain barrel, and the strainer holds back the leaves. The big advantage: you empty the strainer at a comfortable height without climbing a ladder. The drawback: the gutter and the outlet up top remain unprotected. We would therefore combine the flap with a basket in the outlet above. It is considerably more expensive than a basket. Suitable barrels are covered in our guide Rain barrels (in German).

INEFA gutter mesh

A round polyethylene mesh that you simply lay in the gutter, according to the manufacturer in half-round and box gutters of 100 to 125 mm. The leaves stay on top until the wind blows them away. It can be cut to length. In wet fall weather, though, the leaves also stick to the mesh, and then you have to remove them by hand. It is sold in pieces of 2 or 3 meters. For long gutters, that quickly gets expensive.

MEISSNER gutter brushes

Ten brushes, each one meter long and 12 cm in diameter, plus retaining clips against storms. The bristles are UV-resistant plastic on galvanized wire. Brushes also catch needles and small seeds that would slip through mesh. According to the manufacturer, they also keep martens, birds and wasps out of the gutter. Every now and then you have to take them out and shake them, which on ten meters of gutter can easily mean an hour on the ladder. Only for galvanized and plastic gutters.

How we would choose

  • Long gutter, birds under the roof, small debris too: a perforated sheet basket in every outlet; our pick is KOVSGQ for 100 mm, RIRIDAMAI for 87 mm.
  • Only coarse leaves, checking as rarely as possible: Grömo wire leaf strainer.
  • Pipe size unclear: greate, fits from 87 to 100 mm.
  • Garage, garden shed, small budget: EKNA made of plastic.
  • Catching small leaves too, with frequent checks: XIRUYEN caps.
  • No climbing ladders and collecting rainwater: Zambelli flap with strainer, ideally plus a basket up top.
  • Deciduous trees directly above a short gutter: INEFA mesh.
  • Conifers or martens: MEISSNER brushes.

Working on the gutter almost always means a ladder. Set it on firm ground, do not lean it against the gutter itself, and ideally work in pairs. Which ladder is suitable is explained in our guide Ladders (in German). What you can do with the collected rainwater is shown in our guide Cisterns for the garden.

Frequently asked questions

Which is better, gutter mesh or a leaf basket?

Mesh keeps the entire gutter clean but requires material for every meter. A basket only protects the outlet into the downspout and is usually enough on long gutters with few downspouts.

Which leaf basket also stops small twigs and stalks?

A basket made of perforated sheet metal, meaning stainless steel with lots of small holes. Stalks, grass and bird nesting material, on the other hand, slip through the gaps of a wire basket.

What size leaf basket do I need?

What matters is the diameter of the downspout, usually 87 or 100 mm on a single-family home in Germany. Some baskets can be squeezed together and fit both sizes.

How often do you need to clean a leaf basket?

Regularly in the fall, about once a week if trees stand right next to the house. A clogged basket backs up water in the gutter just like a blocked downspout.

Do gutter brushes fit every gutter?

No. According to MEISSNER, brushes with galvanized wire belong only in galvanized or plastic gutters, not in copper or stainless steel gutters. The diameter must match the gutter.

Can you remove leaves from the downspout without a ladder?

Yes, with a downspout diverter flap with a strainer at hip height. The strainer catches the leaves and can be emptied from the ground.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.