Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Homematic IP Door Lock Drive: Which Set Fits Which Door

Homematic IP door lock drive and keypad: which access set fits your cylinder protrusion, thumb turn and rosette, with a worked example and the limits.

handgetestet editorial team · Updated November 17, 2026
White Homematic IP door lock drive pro with rotary knob next to an Access Point 2 on a light backgroundImage: ELV (Pressebild)
Contents15 sections

This guide was first published in German on handgetestet.de.

Before you buy, hold a ruler against the lock cylinder, on the inside. If it protrudes 0 to 9 millimeters beyond the door fitting, the door lock drive pro belongs on the door; at 8 to 15 millimeters, the older HmIP-DLD is also an option. For most doors, we consider the Homematic IP Starter Set Access (Starter Set Zutritt) with HmIP-DLP and HmIP-HAP2 the most sensible route, because it has the wider installation range and three times the battery life. In return, you have to shorten a key, and the keypad is bought separately.

Two drives, two measuring ranges

Both devices turn a key inserted on the inside. The HmIP-DLD clamps onto the protruding cylinder and needs 8 to 15 mm for that; according to the manual, 10 mm is ideal. The HmIP-DLP gets by with 0 to 9 mm because it can also be glued onto the door or screwed to the fitting. Only clamp mounting requires at least 3 mm with this model.

A worked example from the manuals shows what that means. You measure 40 mm on the outside and 40 mm on the inside of a cylinder, each to the fixing screw, and it sits flush. For the DLD, you then need a new 40/50 cylinder. For the DLP, eQ-3 specifies 40/45 for the same case, but according to the data sheet, adhesive mounting even works with 0 mm. In this case, the old cylinder can stay, provided it meets the second condition.

That condition is called the emergency and hazard function. Only with it can the door be unlocked from the outside while a key is inserted on the inside. Without it, you are locked out when the batteries run flat. The key on the inside must also turn in sync, otherwise the position report is wrong. If in doubt, a locksmith will know. And according to eQ-3, always carry a key with you or keep one in a safe place.

The two-finger test

Lock and unlock your door without touching the handle. Does that only work by pushing, pulling or lifting? Then, according to the manual, the door is not suitable. Wooden doors warp with the weather, and the motor may then no longer be able to move the bolt. So don’t just try it on a mild autumn day. Adjusting the hinges or strike plate often helps, and that should happen before you buy.

With the „Open“ function, the drive also pulls back the latch. For the door to spring open, according to eQ-3, the seal still needs enough tension. If it is flattened, the door stays unlocked but closed. The DLD data sheet explicitly lists multi-point locks as possible. If your door has a motorized lock, however, you are in the wrong place here and in the right one with our guide Making a motorized lock smart (in German).

Thumb turn, round rosette, long backplate: what is on your door

The door fitting determines the mounting, and here the pro has the edge. With an oval rosette or long backplate, the plate is screwed into the existing holes, although a long backplate has to go and be replaced by a half set. A round rosette needs an adapter, which comes in two versions. And a thumb turn on the inside instead of a key? For that, eQ-3 offers six thumb-turn adapters, suitable for brands such as Abus, BKS, EVVA, dormakaba, Winkhaus or Keso. According to ELV (German retailer), they work exclusively with the DLP. In this case, the key is not shortened.

Tenants tend to look at removal. According to the manufacturer, adhesive and clamp mounting leave no permanent damage. Shortening, however, affects a key: measured from the cylinder, it must protrude at least 5 mm, and measured from the door surface, no more than 14 mm. So get a spare key beforehand, through the property management in the case of master key systems. The DLD does without shortening but only accepts keys with a head height of no more than 3.4 cm and a head thickness of 4 mm.

Batteries and cold

According to the data sheets, the DLD typically lasts half a year on three AA cells, the DLP 1.5 years on four AA cells. Extrapolated to five years, that is 30 batteries and ten changes for the DLD, and about 13 batteries and three changes for the DLP. With frequent locking, both are likely to fare worse; that is our assumption. A second figure is easily overlooked. The DLD is rated for 5 to 35 °C, the DLP for -10 to +55 °C. On a basement door or in an unheated entrance porch, that rules the DLD out.

Keypad, remote control or just the app?

The HmIP-WKP keypad runs on batteries, mounts on the outside wall and addresses the drive via radio, even when the internet is down. According to the manufacturer, it works with both the DLD and the DLP. It stores up to eight codes with four to eight digits. That is enough for a family. Fingerprint? None. With IP44 and -20 to +55 °C, it is still better placed under a canopy. If you choose, incorrect entries lock it temporarily or permanently; the first lockout lasts 15 seconds and doubles after that.

Home care service or elderly relatives? Then the HmIP-KRCK key ring remote is often simpler, because it has three fixed buttons for locking, unlocking and opening. If it gets lost, you block it in the app. How keypads from other brands compare is covered in our guide to the smart lock keypad, and the question of home contents insurance is answered in the article on the smart lock.

Sets and alternatives compared

ModelContentsCylinder protrusion insideBest for
Homematic IP Starter Set Zutritt mit HmIP-DLP und HmIP-HAP2DLP, Access Point 2, door magnet0–9 mmNew users, little protrusion, thumb-turn cylinders
Homematic IP Set Zutritt Access Point 2 Keypad TürschlossantriebDLD, keypad, Access Point 28–15 mmheated hallway, code entry from day one
Homematic IP Starter Set Zutritt HmIP-SK25DLD, older Access Point8–15 mmtight budget, suitable cylinder
Homematic IP Set Zutritt mit HmIP-DLP und HmIP-KRCK-2DLP, remote control, no hub0–9 mmexisting Homematic system
Homematic IP Keypad HmIP-WKPKeypad, wall bracketnot applicableAdd-on for DLD or DLP
EZVIZ Smart Home Zutritt SetSmart lock, keypad with RFID, gatewayManufacturer’s fit checkerCode and card without Homematic
Nuki Smart Lock UltraLock, new cylinder, 3 keysCylinder is replacedMatter households, cylinder may be swapped

Homematic IP Starter Set Zutritt mit HmIP-DLP und HmIP-HAP2

Our main pick. The door magnet reports whether the door is closed and allows locking after every closing. According to eQ-3, sensors detect vibrations and tampering and can trigger a siren even without internet. That does not make the door more secure in a mechanical sense. Without a keypad, you initially only have the app and voice control.

Homematic IP Set Zutritt Access Point 2 Keypad Türschlossantrieb

Costs a little less at ELV than the Starter Set with the pro and includes the keypad right away. If you already have 8 to 15 mm of protrusion and are mounting it in a heated hallway, it will do the job. The drawback is the frequent battery changes.

Homematic IP Starter Set Zutritt HmIP-SK25

The cheapest route to a remotely controllable door. It includes the older Access Point, not an Access Point 2. If you are planning more than the door, read up on the differences in our comparison of Homematic hubs (in German).

Homematic IP Set Zutritt mit HmIP-DLP und HmIP-KRCK-2

The successor set with the HmIP-KRCK-2 key ring remote. According to ELV, it has separate buttons for opening, unlocking and locking, plus a function button, for example for the entrance lighting. According to ELV, one AAA battery typically lasts two years, and the range in open field is typically 200 meters. One trap for newcomers remains: no hub is included, so you also need an Access Point, Home Control Unit or CCU3.

Homematic IP Keypad HmIP-WKP

The add-on to the Starter Set. No cable and typically two years of battery life; a tamper contact and code log are included. Codes can also control lights, a garage door or alarm mode.

EZVIZ Smart Home Zutritt Set

According to ELV, the lock slips over the existing cylinder, so no shortening is needed. Code, RFID card and app are included out of the box, and the set is clearly cheaper than the Homematic packages with keypad. It runs via the EZVIZ app and its own gateway and does not belong in a Homematic installation. The manufacturer’s installation guide checks the cylinder.

Nuki Smart Lock Ultra

If the cylinder does not fit and may be removed, this is the straightforward alternative. Nuki supplies a universal cylinder with an emergency function and three new keys, and Wi-Fi and Matter are built in. With a master key system, this usually fails, so clear it with the property management first.

From measurement to set

  • 0 to 7 mm of protrusion or a thumb-turn cylinder: Starter Set with DLP, add a keypad if needed.
  • 8 or 9 mm: Both fit; the temperature at the installation site decides.
  • 10 to 15 mm, heated hallway, code entry wanted: Set Zutritt with keypad.
  • Unheated door: DLP only.
  • Homematic is already running: set with DLP and remote control.
  • No Homematic planned, cylinder may be replaced: Nuki Smart Lock Ultra.
  • Code and card without Homematic, cylinder stays: EZVIZ Zutritt Set.

Frequently asked questions

How far does the lock cylinder need to protrude for the door lock drive?

The HmIP-DLD clamps onto the cylinder and needs 8 to 15 mm of protrusion, ideally 10 mm according to the manual. The HmIP-DLP gets by with 0 to 9 mm because it can also be glued or screwed on; only clamp mounting requires at least 3 mm. At 8 or 9 mm, both fit.

Does the cylinder need an emergency and hazard function?

Yes. Only with it can the door be unlocked from the outside while a key is inserted on the inside. Without it, you are locked out when the batteries run flat. The key on the inside must also turn in sync. According to eQ-3, you should always carry a key with you or keep one in a safe place.

Is my door suitable for a door lock drive?

Lock and unlock it without touching the handle. If that only works by pushing, pulling or lifting, the door is not suitable according to the manual. Adjusting the hinges or strike plate before buying often helps. For the door to spring open with the Open function, the seal also needs enough tension.

How long do the batteries in the door lock drive last?

According to the data sheets, the DLD typically lasts half a year on three AA cells, the DLP 1.5 years on four AA cells. Temperature also matters: the DLD is rated for 5 to 35 °C, the DLP for -10 to +55 °C. On an unheated door, only the DLP is therefore suitable.

What can the HmIP-WKP keypad do?

It runs on batteries, mounts on the outside wall and opens via radio, even when the internet is down. It stores up to eight codes with four to eight digits; there is no fingerprint reader. If you choose, incorrect entries lock it, and the first lockout lasts 15 seconds. With IP44, it is better placed under a canopy.

Can I install the door lock drive in a rented apartment?

According to the manufacturer, adhesive and clamp mounting leave no permanent damage. With the DLP, however, a key gets shortened, so get a spare key beforehand, through the property management in the case of master key systems. The DLD does without shortening but only accepts keys with a head height of no more than 3.4 cm.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.