Contents12 sections
This guide was first published in German on handgetestet.de.
A topper doesn’t repair a mattress. It only changes the top few centimeters: a sleeping surface that’s too firm becomes softer, the gap in a double bed disappears, a tired guest sofa becomes more bearable. If that’s what you want, the most likely everyday choice is a gel foam topper with a removable cover that’s washable at 60 degrees Celsius, such as the Ravensberger Gel-LUX. If, on the other hand, you can feel hollows, save yourself the purchase.
Stiftung Warentest, Germany’s leading consumer testing organization, says the same. In its assessment of October 14, 2026, project manager Sarah Vasconi states: if a mattress sags, no topper helps; it needs replacing. And it can even make a good mattress worse, because it covers up its zones. The organization hasn’t tested toppers individually so far. Partner organizations from Italy and the UK found good pressure distribution in many models; support was weaker than comfort.
Cold foam, memory foam, gel or latex: what’s behind them?
The material names sound technical, but they mostly describe a feel. Cold foam springs back quickly and feels fairly neutral. Memory foam yields slowly under heat and pressure; you sink in and stay there for a while. Gel foam sits in between: conforming, but with faster recovery. Natural latex is heavy, elastic and usually riddled with air channels.
One value helps more in a comparison than any advertising line: the foam density in kilograms per cubic meter (RG in German data sheets). Reputable vendors list it on the data sheet. At Ravensberger, the range runs from RG 40 for the gel foam through RG 60 for the memory foam to RG 75 for the latex. If the figure is missing entirely, you simply know less about the core.
And warmth? Ravensberger itself describes the sleep climate of its memory foam topper as warm and cozy. For people who are always cold, that’s an argument. If you kick off the covers at night anyway, you should rather go for gel, cold foam or latex.
How thick should a topper be?
The models below range from 4 to 9 centimeters. Four centimeters changes the feel noticeably but subtly. At nine centimeters, you’re almost lying on a second mattress. Then there’s weight: according to the data sheet, Ravensberger’s latex topper weighs a good 11 kilograms even in 80 × 200 cm. If you want to lift the topper regularly to air it out, you’ll feel that every week.
An often overlooked point is the fitted sheet. Mattress plus a 9-centimeter topper quickly adds up to a height that a normal sheet no longer wraps around. Measure before buying and plan on a sheet with a deep pocket.
Do I need a separate topper for a box spring bed?
Usually not. Many box spring beds already come with a topper, and in the Stiftung Warentest box spring test, combinations with and without a topper performed equally well. So you only need an extra topper if the included one has worn out or the bed feels too firm. Then two things matter most. It has to be non-slip, via elastic straps, retaining loops or a coated underside. And its width has to match the sleeping surface exactly; for double beds, ideally in one continuous piece of 160 or 180 cm.
What does „washable“ actually mean?
This is where a second look at the data sheet pays off. For most toppers, only the cover is meant. For all three of its models, Ravensberger specifies a cover that’s removable all around with a zipper, gentle cycle up to 60 °C, no tumble dryer. Emma states 40 °C. With the bett1 BODYGUARD Topper, the whole topper is washable at 40 °C, but according to the manufacturer it doesn’t fit in a standard household washing machine. In practice, that means a laundromat with a large machine.
Five toppers you should know
| Model | Core and thickness | Cover according to manufacturer | Best for |
|---|---|---|---|
| Ravensberger Gel-LUX | gel foam RG 40, 7 or 9 cm, H2/3 | removable, 60 °C, elastic straps | those who want a softer feel without sinking in |
| Ravensberger Thermo-LUX | memory foam RG 60, 9 cm, H2/3 | removable, 60 °C | back and side sleepers who like it warm |
| Ravensberger Natura-LUX | natural latex RG 75, 9 cm, H2/3 | removable, 60 °C, four handles | those who want latex and don’t mind the weight |
| Emma Original Topper | Airgocell and HRX foam, 6 cm, reversible | removable, 40 °C, non-slip underside | those who want to try two firmness levels |
| bett1 BODYGUARD Topper | cold foam, approx. 4 cm, zones | no removable cover mentioned, topper washable at 40 °C (large machine) | those who just want a thin, soft layer |
Ravensberger Gel-LUX
Gel foam with RG 40, in a 7- or 9-centimeter version, firmness H2/3 and, according to the manufacturer, medium soft. The polyester and lyocell cover zips off on four sides and can be washed at 60 °C; elastic straps at the corners keep the topper in place. Besides 200 cm, it’s also available in 220 cm length. It has no zones, which on a good zoned mattress is more of an advantage than a drawback.
Ravensberger Thermo-LUX
The memory foam topper has a 7-centimeter core with RG 60, around 9 centimeters in total. Ravensberger recommends it for back and side sleeping. If you sweat easily, better read the manufacturer’s description of a warm sleep climate as a warning.
Ravensberger Natura-LUX
Pincore latex made of 100 percent natural latex, RG 75, with ventilation channels. The manufacturer states a weight range of 50 to 110 kilograms. The cover has four handles, and you’ll need them. For a topper that’s rarely moved, that’s fine. If you take it off often, you’ll curse it.
Emma Original Topper
Six centimeters, two sides. On top, the softer Airgocell layer; underneath, firmer HRX foam, about 2.5 centimeters each. Emma advises side sleepers to put the soft side up, and back and stomach sleepers the firm side. The underside has a non-slip coating, and the manufacturer grants up to 30 nights of trial sleeping. On Amazon, the model is listed as the Emma Flip Topper.
bett1 BODYGUARD Topper
At around 4 centimeters, the thinnest here. According to bett1, the core is especially soft cold foam with the zones of the BODYGUARD mattress, and the sides have different covers: HyBreeze polyester on top, a cotton blend underneath. Retaining loops secure it. No removable cover is mentioned, which makes care cumbersome. If it lies on a mattress other than the BODYGUARD, keep in mind that two zone patterns will overlap.
How we would decide
- Mattress is fine but too firm: Ravensberger Gel-LUX in 7 cm. Softer, without completely covering up the zones underneath, and the cover is washable at 60 °C.
- You get cold easily at night: Thermo-LUX, knowing that memory foam reacts slowly.
- Unsure how soft it should be: Emma Original Topper. Two sides to try out, plus the trial period.
- Guest bed or sofa bed: the thin BODYGUARD, provided you can live with washing it in a large machine.
- Hollow in the mattress: no topper. A new mattress; help with that is in our guide to buying a mattress.
One last piece of advice from Stiftung Warentest applies to all models: check the return conditions before buying, because how a topper works with your mattress only becomes clear after a few nights. If you want to renew the bedding at the same time, you’ll find useful tips in our guide to comforters and our guide to pillows (in German).
Frequently asked questions
Does a topper help with a sagging mattress?
No. According to Stiftung Warentest, no topper helps with a sagging mattress; it needs replacing. It can even make a good mattress worse, because it covers up its zones. A topper makes sense if a sleeping surface is too firm, a gap in a double bed should disappear, or a guest sofa should become more bearable.
What's the difference between cold foam, memory foam, gel and latex?
Cold foam springs back quickly and feels fairly neutral. Memory foam yields slowly under heat and pressure, so you sink in. Gel foam sits in between, conforming but with faster recovery. Natural latex is heavy, elastic and usually riddled with air channels. When comparing, the foam density on the data sheet helps more than any advertising line.
Which topper suits people who sweat at night?
Gel, cold foam or latex rather than memory foam. Ravensberger itself describes the sleep climate of its Thermo-LUX memory foam topper as warm and cozy. For people who get cold easily, that's an argument; if you kick off the covers at night, better read that description as a warning.
How thick should a topper be?
The models in this comparison range from 4 to 9 centimeters. Four centimeters changes the feel noticeably but subtly; at nine, you're almost lying on a second mattress. Thicker toppers are harder to air out, and mattress plus topper often need a fitted sheet with a deep pocket. Measure before buying.
Can you wash a topper?
Usually only the cover is meant. Ravensberger specifies a removable cover washable up to 60 °C for its three models, no tumble dryer. Emma states 40 °C. The bett1 BODYGUARD Topper is washable as a whole at 40 °C but, according to the manufacturer, doesn't fit in a standard household washing machine; in practice, that means a laundromat.
Does a box spring bed need an extra topper?
Usually not. Many box spring beds already come with a topper, and in the Stiftung Warentest test, combinations with and without one performed equally well. An extra one is only worth it if the included one has worn out or the bed feels too firm. Then it must be non-slip and match the width of the sleeping surface exactly.
Sources
- Stiftung Warentest: what mattress toppers really do (October 14, 2026)
- Ravensberger: Gel-LUX
- Ravensberger: Thermo-LUX
- Ravensberger: Natura-LUX
- Emma: Original Topper
- bett1: BODYGUARD Topper
Where to buy
- Ravensberger Gel-LUXCheck price at Amazon.deAvailable in Germany: Amazon.de
- Ravensberger Thermo-LUXCheck price at Amazon.deAvailable in Germany: Amazon.de
- Ravensberger Natura-LUXCheck price at Amazon.deAvailable in Germany: Amazon.de
- Emma Original Topper (Flip Topper)Check price at Amazon.deAvailable in Germany: Amazon.de
- bett1 BODYGUARD TopperCheck price at Amazon.deAvailable in Germany: Amazon.de
