Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet
This page in 6 more languages

DeutschNederlandsFrançaisItalianoEspañolPolski

Model Railroad Scenery 2026: Grass, Trees, Buildings, Lighting

Model railroad scenery: static grass applicator, grass fibers, trees, building kit and LED lighting from Noch, Busch and Faller, with quantities and safety.

handgetestet editorial team · Updated November 17, 2026
Contents13 sections

This guide was first published in German on handgetestet.de.

A model railroad only looks real thanks to what grows next to the track. If you want to build more than a small diorama, you should therefore buy a static grass applicator first, such as Noch’s Gras-Master 3.0, and only after that trees, buildings and lighting. For a first test piece, the Start-Set Begrasung (grass starter set) with a puffer bottle is enough.

The order has a practical reason. Grass goes onto the baseboard as the first layer, and trees and buildings are set into it afterwards. If you work the other way around, you end up laboriously flocking around every building foundation.

Why model grass has to stand upright

Sprinkled fibers usually fall flat into the glue and look like green felt. An electrostatic grass applicator solves the problem. According to the manual, the Gras-Master 3.0 converts the voltage of its 9-volt battery into a negative DC voltage of up to about 11 kilovolts. The fibers become charged in the container and are attracted by the surface to which the alligator clip of the opposite pole is attached. There they align vertically in the glue. For this to work, the base must be conductive. That is the job of the grass glue.

Ordinary white glue is only a stopgap for this. Noch describes its Gras-Kleber (grass glue, item no. 61130, 250 g) as slower-setting and with lower surface tension, so that the fibers stay standing in the glue bed. It dries clear. Prime the surface light green beforehand, otherwise wood or polystyrene will later show through the meadow.

How much grass a layout swallows

This is where the classic bad buy happens: a single 50-gram bag for the entire layout. For one square meter, Noch calculates around 250 g of Master grass blend and 500 g of grass glue, and for the 6 mm wild grass even about 300 g. One bag is therefore enough for roughly 0.2 square meters. That is a piece measuring 40 by 50 centimeters.

A sample calculation. On an H0 baseboard of 200 by 100 centimeters, half often remains green after tracks, roads and buildings. For this one square meter, you need five bags of fibers and two cans of glue, a little more with several shades. Better to mix right away: a light base color, plus darker wild grass on embankments and ditches, looks much more natural than a uniformly green surface.

If you do not want to buy an applicator, you can use grass mats. Heki describes its decovlies Wildgras as a ground cover mat with a pile height of 5 to 6 mm on a practically invisible carrier mesh. On new surfaces, it is laid with spray adhesive; on older layouts, according to the manufacturer, it even holds without glue in the existing fiber base. For quick refreshing, that is convenient. If you want to shape every embankment individually, loose fibers give you more flexibility.

High voltage, glue and children

Kilovolts sound dangerous, and the manual takes that seriously. Noch prohibits operation when people with a pacemaker are present. You should never touch the bottom of the grass container, not even when emptying out leftovers after switching off. The high voltage is still present for a short time then. The device is not a toy, should only be used by children under adult supervision, and should only be operated in dry rooms between 15 and 40 degrees. Before a longer break, take the battery out.

The glue also has a catch for sensitive skin. According to the safety data sheet, Noch grass glue contains a preservative from the isothiazolinone group that can cause allergic reactions. It must be kept out of the reach of children and must not get into the eyes or onto the skin. In its safety instructions, Faller likewise requires adhesives, paints and knives to be kept out of the reach of children. Busch recommends its trees for modelers aged 14 and up.

Seven building blocks for your first landscape

ProductKey data according to manufacturerScaleBest for
Noch Start-Set Begrasung (07069)40 g grass fibers 2.5 mm, 50 g grass glue, grass puffer bottleall commonFirst diorama, trying it out
Noch Gras-Master 3.0 (60111)up to approx. 11 kV, 9 V battery, 3 to 4 hrs., three sieves, opposite pole with alligator clipZ to GBuilding a layout at home
Noch Master-Grasmischung „Sommerwiese“ (07072)50 g, fibers 2.5 to 6 mm in several shades of greenH0, TT, 0, GMeadows and pastures
Busch 12 Laubbäume (6486)12 trees, various shapes, approx. 70 to 125 mmH0, TTQuick groups of trees
Busch Bausatz Naturbäume (6801)Sea foam for approx. 15 to 30 bushes and trees, foliage not includedH0, TT, N, ZPatient hobbyists
Faller Schwarzwaldmühle (131210)130 parts in 8 colors, 145 × 120 × 80 mm, difficulty easyH0First building kit
Faller LED-Gebäudebeleuchtung mit Steuerung (180678)6 warm white LEDs, lighting program, 12 V DC or 16 V ACH0, TT, N, ZLively houses in the evening

Noch Start-Set Begrasung: for trying it out

Here a puffer bottle replaces the applicator. Shaking charges the 2.5 mm short fibers, and then you puff them onto the surface coated with glue. Noch intends the bottle for short scatter grass. Measured against the consumption figures for grass fibers, 40 g is enough for a diorama, not for a layout.

Noch Gras-Master 3.0: the workhorse

Noch lists the 3.0 as its entry-level model alongside the newer Gras-Master 4.0 with a rechargeable battery. According to the manual, its three sieves cover fibers from 1.5 to 12 mm: fine up to 2.5 mm, medium up to 6 mm, coarse up to 12 mm. With a 9-volt battery, it runs for three to four hours. Keep a spare battery ready, because a dead battery in the middle of a freshly glued surface is annoying. According to the brochure, the Gras-Master 4.0 delivers a constant 15 kV and charges via USB-C, but no charger is included. Noch lists both devices as suitable for home layouts. The 4.0 mainly adds interchangeable containers and a rechargeable battery.

Noch Master-Grasmischung „Sommerwiese“

This blend (summer meadow) combines fibers between 2.5 and 6 mm in several shades of green. It is precisely these different lengths that make a meadow look alive. Noch does not list N scale for this blend. There you are better off with shorter scatter grass.

Busch 12 Laubbäume: ready to plant

Twelve ready-made deciduous trees between about 70 and 125 mm. Converted to H0, the largest corresponds to a tree of just under eleven meters. For the edge of a forest, that is rather small; for gardens, field margins and the group behind the station, it fits well.

Busch Naturbäume: sea foam kit

Sea foam is a finely branched, preserved natural plant. In the instructions, Busch explains how to trim it with scissors and how to soak crooked trunks in water and bend them straight. Foliage, paint and glue are not included; for that, Busch recommends scatter powder or foliage flakes and spray adhesive. It takes time, but produces irregular shapes like those found in a forest. The tree kits from Woodland Scenics follow the same principle with bendable armatures and foliage flakes; the glue is missing there too, and according to the manufacturer they are not intended for children.

Faller Schwarzwaldmühle: small kit, big effect

With a footprint of 145 by 120 millimeters, the mill (Black Forest mill) fits next to a stream or at the edge of a field. Faller rates it as easy, and 130 parts in eight colors mean that painting is not essential. For gluing, Faller recommends its own plastic cement, Expert. Which tools are suitable for this is covered in our guide to tools for model building (in German). For lighting from inside, Faller offers an LED lighting base (180667).

Faller LED-Gebäudebeleuchtung mit Steuerung

A lighting base makes a house glow evenly. This module (LED building lighting with control) switches six warm white LEDs alternately, so that sometimes the stairwell and sometimes a room lights up. According to the instructions, one cycle takes about five minutes, or around 30 minutes after removing a jumper on the circuit board. It is connected to a model railroad transformer with 12 V DC or 16 V AC. To keep light from spilling through neighboring windows, Faller recommends covers made of thin cardboard or aluminum foil. And very clearly: connecting wires must never go into a wall outlet.

What to buy first in which situation

  • First layout under construction: Gras-Master 3.0, two cans of grass glue and several bags of grass blend. Trees and buildings come after that. If you do not have a railroad at all yet, start with the right model railroad starter set.
  • Just a diorama or a test: Start-Set Begrasung. An applicator only pays off with more area.
  • Lots of forest in a short time: ready-made deciduous trees for the bulk, sea foam trees for the foreground.
  • It should come alive in the evening: first a building kit with room for lighting, then the controlled lighting for one or two houses within view.

No hurry with the buildings. A well-grassed baseboard with a few groups of trees often looks more harmonious than a village on a bare base.

Frequently asked questions

How much model grass do you need per square meter?

For one square meter, Noch calculates around 250 g of Master grass blend and 500 g of grass glue, and about 300 g for the 6 mm wild grass. A single 50-gram bag is therefore enough for roughly 0.2 square meters, a piece measuring 40 by 50 centimeters. Several shades mixed together look more natural than a uniformly green surface.

Why does model grass stand upright with a static grass applicator?

Sprinkled fibers usually fall flat into the glue and look like green felt. An electrostatic applicator charges the fibers, the surface with the opposite pole attracts them, and they align vertically in the glue. For this to work, the base must be conductive, which is the job of the grass glue. White glue is only a stopgap.

Is a static grass applicator dangerous?

The manual takes the high voltage seriously. Noch prohibits operation when people with a pacemaker are present and warns against touching the bottom of the grass container, even shortly after switching off. Children should only use the device under adult supervision, and it may only be operated in dry rooms.

What is the difference between the Gras-Master 3.0 and 4.0?

The 3.0 is the entry-level model: a 9-volt battery lasts three to four hours, and three sieves cover fibers from 1.5 to 12 mm. According to the brochure, the 4.0 delivers a constant 15 kV, charges via USB-C and comes with interchangeable containers, but no charger is included. Noch lists both as suitable for home layouts.

Ready-made model trees or a sea foam kit?

Both have their place. The Busch 12 Laubbäume are ready to plant and suit gardens, field margins and groups of trees. The Busch Bausatz Naturbäume made of sea foam takes time, and foliage and glue are not included, but it produces irregular shapes like those in a forest. A sensible approach: ready-made trees for the bulk, sea foam for the foreground.

Should you prime the surface before applying grass?

That makes sense, because Noch grass glue dries clear, and otherwise wood or polystyrene shows through the meadow. A light green primer prevents this. Caution is needed with the glue itself: according to the safety data sheet, it contains a preservative that can cause allergic reactions, and it must be kept out of the reach of children.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.