Contents14 sections
This guide was first published in German on handgetestet.de.
No robot lawn mower is maintenance-free. Lay the manuals side by side and you end up with a brush once a week, a screwdriver every few weeks and a fixed item in the yearly budget. Of the mowers compared here, we expect the least work and the fewest surprises from the Worx Landroid Vision Cloud 4WD WR341E: it can go under the hose, has no trimmer line, and its 20-volt battery is a standard part. The model that promises the cleanest edges, on the other hand, is expensive to run: the Ecovacs GOAT A1600 LiDAR PRO with its line trimmer.
Every week: brush, cloth, no pressure washer
In its maintenance schedule for the Automower 305E NERA, Husqvarna lists cleaning as a weekly task, along with a visual check for damage and wear. That is a useful benchmark for all brands. Switch the mower off, with Worx also take out the battery, then inspect the underside. According to Gardena, the mower no longer works satisfactorily on slopes when grass blocks the wheels.
All of them agree on one point: pressure washers are prohibited, because the water is forced into the seals. When it comes to the hose, opinions differ. Worx explicitly names it as the only permitted method, Gardena wants a brush and running water, eufy a brush or hose. Gardena’s charging station, however, must never be put under running water. Ecovacs contradicts itself. Its online shop says that thanks to the IPX6 protection rating, rinsing it off is enough. The A1600 manual calls for a brush and a dry cloth. Stick to the manual and fit the protective cover over the laser sensor first; according to Ecovacs, the trimmer module must stay connected so that no water gets into the plug connection.
Turning the mower on its back is no small matter. Use a soft surface and cut-resistant work gloves; the blades are sharp.
Every one to two weeks: clean the eyes
The more sensors, the more care. The A1600 wants its laser sensor wiped weekly, the camera and depth sensor every one to two weeks. On the O800, it is only the last two. For the C15, eufy warns against using brushes and hard objects on the camera, so use a soft cloth. Gardena is the strictest: no paper towels, no scouring pads, no glass cleaner, but water with a little pH-neutral dish soap and only light pressure instead. Such products can damage the viewing window. Worx gives no fixed interval and reports a covered camera as error E12.
Every four to eight weeks: replace the blades
Here the manufacturers are further apart than it seems. Husqvarna expects three to six weeks for the main blade disc and nine to twelve for the edge disc. Ecovacs specifies four to six weeks, Gardena gives four to seven, eufy one to two months. In the manual for the WR303E series, Worx states up to two months with daily mowing, because the disc uses both cutting edges; the 4WD manual gives no figure. According to Gardena, sand, fertilizer, dense grass and roots all play a part. Dull blades give themselves away in the cut.
Always replace all blades together with their screws. Worx, Gardena and eufy explain this with imbalance and warn about old screws, which can come loose. Eufy specifies a tightening torque of 1 newton meter. After installation, the blades must turn freely. You need nothing more than a suitable screwdriver (in German). Cheap third-party blades are not a good idea: Ecovacs and Gardena require original parts, and otherwise Gardena considers safety no longer guaranteed.
Six mowers, six maintenance plans
| Model | Blades according to manufacturer | Washing | Other wear parts | Best for |
|---|---|---|---|---|
| Worx Landroid Vision Cloud 4WD WR341E | No figure, sister series up to 2 months | Garden hose | None stated | Little effort, long service life |
| Worx Landroid Vision Cloud 4WD WR344E | No figure | Garden hose | Blades of the edge module | Large lawns, edges without line |
| Gardena smart SILENO sense 400 | 4 to 7 weeks | Brush, running water | Bearings, contact plates | If you want to hand off the inspection |
| eufy C15 | 1 to 2 months, with screws | Brush or hose | None stated | Small gardens |
| Ecovacs GOAT O800 RTK | 4 to 6 weeks | Brush, dry cloth | None stated | Low parts costs at Ecovacs |
| Ecovacs GOAT A1600 LiDAR PRO | 4 to 6 weeks | Brush, dry cloth | Trimmer line and brush every 4 to 8 weeks | If you do not want to touch up edges |
Worx Landroid Vision Cloud 4WD WR341E
Six blades are included, the battery can be removed for working on the mower and, according to Worx, is available separately as an accessory. After a few years, that counts for more than any feature. Drawback: the manual gives no replacement interval for this model itself, so you have to go by eye.
Worx Landroid Vision Cloud 4WD WR344E
Same maintenance principle, but with a module for the edge. It is changed like the main blade and brings additional blades into play; eight blades are included. There is no line and no brush.
Gardena smart SILENO sense 400
The manual here is the most detailed: new mowers should be checked weekly, and you replace the battery yourself with a Torx 20 screwdriver. In return, Gardena asks for more manual work, such as cleaning the charging plates with sandpaper and greasing them. If you do not want to do that, you can book the inspection service, which is also available with storage.
eufy C15
The plan is simple, and the replacement window of one to two months is generous. The warranty table lists two years for the mower and battery, none for the blade set. You should clear the caster wheels regularly.
Ecovacs GOAT O800 RTK
Without a trimmer, it comes down to blades and two sensors. Then there is the reference station, which you only need to keep upright. One drawback applies to both GOAT models: we found no replacement battery among the accessories in the German online shop, the manual only allows the original battery, and the warranty does not cover deep discharge.
Ecovacs GOAT A1600 LiDAR PRO
The trimmer handles edge work you would otherwise do yourself. In return, the line and brush need replacing every four to eight weeks. The mower estimates the remaining line from the distance traveled and alerts you; according to Ecovacs, hard edges along the boundary wear it down faster. If you already use a mowing strip made of stone or metal (in German), factor that in.
What does it cost per year?
Stiftung Warentest, the German consumer testing organization, puts blade sets in the low double-digit euro range and replacement batteries in the double- to triple-digit range. Let us assume a 30-week season, which is our own assumption: an O800 then needs five to eight blade changes. Ecovacs sells twelve blades including screws per pack, which keeps it in the double digits per year at shop prices. With the A1600, four to eight lines and brushes come on top, meaning two to four trimmer kits with two of each. Taking the intervals literally, the mower ends up in the low triple-digit range per season. The product page does not spell that out.
Once a year: contacts and service
Husqvarna schedules polishing of the charging plates and contacts once a year; other items such as wheel wear and shock absorbers are a job for the service dealer, where seals and filters are due every three years. Gardena recommends a winter service with a battery check. On top of that come updates, which according to Stiftung Warentest are regularly due for connected mowers. If the runtime drops, that can be down to the battery, according to Gardena and Ecovacs. How to get the mower through the winter is a topic of its own; a robot mower garage (in German) does not replace cleaning, in any case.
What kind of maintenance type are you?
- You want to deal with it as rarely as possible: Worx WR341E, touching up the edges with a brush cutter (in German) or shears.
- Edges should be clean without line: Worx WR344E.
- You would rather hand off maintenance: Gardena smart SILENO sense 400 with inspection service.
- Small garden, few sensors: eufy C15 or Ecovacs GOAT O800 RTK.
- You pay for edges without manual work and budget for the consumables: Ecovacs GOAT A1600 LiDAR PRO.
Whether a blade disc with more blades mows better is something we checked in our review of the 6-blade disc for the Segway Navimow.
Frequently asked questions
How often do you need to clean a robot lawn mower?
Husqvarna lists cleaning as a weekly task, along with a visual check for damage. That is a useful benchmark for all brands. Switch the mower off first, with Worx also take out the battery, and wear cut-resistant gloves when turning it over, because the blades are sharp.
Can you hose down a robot lawn mower with a garden hose?
That depends on the manufacturer. Worx names the hose as the only permitted method, eufy a brush or hose, Gardena a brush and running water. Ecovacs calls for a brush and a dry cloth in its manual. Pressure washers are prohibited by all of them, because the water is forced into the seals.
When should you replace the blades on a robot lawn mower?
The figures vary: Husqvarna expects three to six weeks, Ecovacs four to six, Gardena four to seven, eufy one to two months. Sand, fertilizer and dense grass shorten that. Dull blades give themselves away in the cut.
What should you watch for when changing the blades?
Always replace all blades together with their screws, because of imbalance and because old screws can come loose. After installation, the blades must turn freely. Ecovacs and Gardena require original parts; otherwise Gardena considers safety no longer guaranteed.
How do you clean the camera and sensors on a robot lawn mower?
With a soft cloth, without brushes or hard objects. Gardena recommends water with a little pH-neutral dish soap and light pressure, no paper towels, scouring pads or glass cleaner. The A1600 wants its laser sensor wiped weekly, the camera and depth sensor every one to two weeks.
What maintenance is due once a year?
Husqvarna schedules polishing of the charging plates and contacts once a year; wheel wear and shock absorbers are a job for the service dealer. Gardena recommends a winter service with a battery check and offers an inspection service, including storage. On top of that come regular updates for connected mowers.
Sources
- Stiftung Warentest: Robot lawn mowers tested
- Worx: Manual WR340E to WR344E
- Worx: Manual WR303E, WR305E, WR308E
- Worx: WR341E
- Gardena: Manual smart SILENO sense
- Gardena: Inspection service
- Husqvarna: Manual Automower 305E NERA
- eufy: Manual C15
- Ecovacs: Manual A1600 and A3000
- Ecovacs: Manual O600 and O800
- Ecovacs: Shop page A1600
- Ecovacs: Cleaning instructions
- Ecovacs: Blades
- Ecovacs: Trimmer brush
- Ecovacs: Trimmer line
- Ecovacs: Blade kit
- Ecovacs: Trimmer kit
Where to buy
- Worx Landroid Vision Cloud 4WD WR341ECheck price at Amazon.deAvailable in Germany: Amazon.de
- Worx Landroid Vision Cloud 4WD WR344ECheck price at Amazon.deAvailable in Germany: Amazon.de
- Gardena smart SILENO sense 400Check price at Amazon.deAvailable in Germany: Amazon.de
- eufy C15View at CoolblueAvailable in Germany: CoolblueCheck price at Amazon.deAvailable in Germany: Amazon.de
- Ecovacs GOAT O800 RTKView at EcovacsAvailable in Germany: EcovacsCheck price at Amazon.deAvailable in Germany: Amazon.de
- Ecovacs GOAT A1600 LiDAR PROView at EcovacsAvailable in Germany: EcovacsCheck price at Amazon.deAvailable in Germany: Amazon.de
