Contents12 sections
This guide was first published in German on handgetestet.de.
A 30-piece screwdriver set sounds like good preparation. Usually, though, it contains sizes that are never needed, while the cross-head tip that fits the screw is missing. For the home and a hobby workshop, we consider the Wera 160 iSS/7 the most well-rounded set: VDE-insulated, with slim blades and with slotted, Phillips and PlusMinus in one package. If you open up electronics or assemble furniture, you will need another tool as well.
The tip matters, not the number of pieces
Three profiles come up all the time at home. Slotted, Phillips (PH) and Pozidriv (PZ). The two cross-head profiles look similar but behave differently under load, and a wrongly chosen tip slips out and damages the screw head. We explain why in detail in the guide to bit sets. For buying, one rule is enough. Check whether PH2 is in the set and whether there is a suitable tip for Pozidriv.
Wera and Wiha solve this with PlusMinus blades, which are designed for combination screws with slotted and cross heads. PB Swiss Tools relies on two genuine PZ blades in the PB 5543, while Gedore and Felo stick with Phillips. Torx is missing from all five VDE sets in this guide. If you need Torx, plan for a separate tool.
With the handle, two details are worth a look. Multi-component handles combine hard zones for quick repositioning with soft zones for torque; that is how Wera describes its Kraftform handle. And an anti-roll feature stops the tool from rolling off the ladder step. Wera, Wiha and Felo mention it explicitly.
VDE-insulated means protected, not cleared for live work
Insulated screwdrivers to IEC 60900 are approved for work up to 1,000 volts AC. According to Wera, every single piece is tested individually in a water bath at 10,000 volts, and impact resistance is tested at minus 40 degrees. PB Swiss Tools additionally specifies 1,500 volts DC for the PB 5543.
That does not amount to permission. The German accident prevention regulation DGUV Vorschrift 3 states clearly in § 6 that work on live active parts is generally not permitted; the de-energized state must be established beforehand and maintained for the duration of the work. Exceptions for qualified professionals are covered in § 8. The insulation is therefore a reserve in case something is still live. Switching off the circuit breaker remains mandatory.
In practice, something else matters too: the thickness of the blade. On conventional VDE screwdrivers, a plastic sleeve sits on the shaft and gets in the way in deep terminals of switches or flush-mounted boxes. Wiha states that its slimFix blades are up to 33 percent slimmer thanks to integrated insulation. Wera also has blades with a reduced diameter in the 160 iSS/7.
Seven sets side by side
| Model | Contents according to manufacturer | Insulation | Best for |
|---|---|---|---|
| Wera 160 iSS/7 | Slotted 3.5 / 4 / 5.5 mm, PH1, PH2, PlusMinus 1 and 2 | VDE, 1,000 V, individually tested at 10,000 V | Home use, work in tight boxes |
| Wiha SoftFinish electric slimFix (38362) | Slotted 3.5 / 4 / 5.5 mm, PH1, PH2, SL/PZ2 | VDE, 1,000 V AC, IEC 60900 | Electrical work on deep-set terminals |
| PB Swiss Tools PB 5543 | Slotted sizes 1 to 4, PZ1, PZ2 | 1,000 V AC / 1,500 V DC, IEC/EN 60900 | Anyone who wants genuine Pozidriv blades |
| Gedore VDE 2170-2160 PH-077 | Slotted 2.5 / 4 / 5.5 / 6.5 mm, PH0, PH1, PH2 | VDE, 1,000 V, EN/IEC 60900 | Wide range of slotted sizes, Phillips only |
| Felo Ergonic VDE 413 961 98 | Slotted 3.0 / 4.0 / 5.5 / 6.5 mm, PH1, PH2 | AC 1,000 V, IEC 60900 | Large slotted screws, sturdy handle |
| Wiha PicoFinish 42990 | Slotted 1.5 to 3.0 mm, PH00, PH0, holder | not insulated | Eyeglasses, electronics, model building |
| Wera Kraftform Kompakt Stubby Magazin RA 1 | Ratchet handle, 6 bits: PH1, PH2, TX15, TX20, TX25, slotted 5.5 | not insulated | Furniture assembly, tight spots |
Wera 160 iSS/7
Seven blades, and each one has its reason. Besides three slotted sizes and PH1/PH2, there are two PlusMinus blades, which also covers Pozidriv. Wera reduces the blade and handle diameter, which helps in crowded junction boxes. If you need to loosen large slotted screws from 6.5 mm upward, you will not find a suitable blade here.
Wiha SoftFinish electric slimFix, 6-piece
The slimmest approach among the insulated sets. According to Wiha, the blades are made of chrome-vanadium-molybdenum steel and are through-hardened, and the insulation is integrated into the blade. With one SL/PZ2 blade, Pozidriv is represented in only one size. For switches, sockets and distribution boards, that is usually enough.
PB Swiss Tools PB 5543
PB Swiss Tools rates the set for 1,000 volts AC and 1,500 volts DC. The blades are color-coded by screw type, which saves time when reaching into the bag. Phillips, however, is missing entirely, and the manufacturer lists the slotted sizes only as numbers 1 to 4, not in millimeters. If your home mostly has Pozidriv screws, this set serves you well.
Gedore VDE 2170-2160 PH-077
Seven pieces with a three-component handle and a hanging hole. The slotted range goes from 2.5 to 6.5 mm, and for cross-head there is PH0 to PH2. Gedore specifies molybdenum-vanadium-plus steel, hardened and tempered. Without a Pozidriv blade, PZ screws leave you with only a makeshift solution.
Felo Ergonic VDE 413 961 98
For the Ergonic handle, Felo relies on soft cushions that adapt to the hand according to the manufacturer, plus screw symbols on the handle cap. According to Felo, the insulation is tested individually, and the blades are made of chrome-molybdenum-vanadium steel. In terms of contents, the set resembles the Gedore one. Pozidriv is missing here as well.
Wiha PicoFinish 42990
For eyeglass screws, the battery cover on a toy or model building. Six precision screwdrivers from 1.5 to 3.0 mm slotted plus PH00 and PH0, along with a holder for the workbench. Wiha describes a smooth-running rotating cap with the profile printed on it and a quick-turn zone. This set is not insulated and has no place in electrical installation work.
Wera Kraftform Kompakt Stubby Magazin RA 1
A short ratcheting screwdriver with six bits in a swiveling magazine in the handle. According to Wera, the return angle is 9 degrees, and in the neutral position the ratchet is off. The BiTorsion bits have a torsion zone to absorb load peaks. Behind the cabinet, under the sink, on a shelf with Torx screws, the stubby plays to its strengths. For long blades and deep holes, it is too short.
Which set suits which workbench
- For a household with occasional work on a lamp or switch, we go with the Wera 160 iSS/7, because it covers Phillips and Pozidriv in one set.
- If you often work in deep flush-mounted boxes, reach for Wiha slimFix.
- Mostly Pozidriv screws in the house: PB Swiss PB 5543.
- Large slotted screws up to 6.5 mm: Gedore or Felo, both with Phillips instead of Pozidriv.
- Electronics and small jobs: Wiha PicoFinish, plus the Wera Stubby with ratchet for furniture and Torx.
Our advice for getting started: an insulated basic set plus a precision set. If you work with a cordless drill regularly, you are better off adding a decent bit set than a second large screwdriver set.
Frequently asked questions
Which screwdrivers do you need at home?
Three profiles come up all the time: slotted, Phillips and Pozidriv. Check whether PH2 is in the set and whether there is a suitable tip for Pozidriv. A wrongly chosen tip slips out and damages the screw head. Torx is missing from all five VDE sets in this guide.
What is the difference between Phillips and Pozidriv?
The two cross-head profiles look similar but behave differently under load. Wera and Wiha cover Pozidriv with PlusMinus blades, while PB Swiss Tools includes two genuine PZ blades in the PB 5543. Gedore and Felo stick with Phillips, which is only a makeshift solution for PZ screws.
Can I work on live circuits with a VDE screwdriver?
No, the insulation is not a permission. Under the German accident prevention regulation DGUV Vorschrift 3, work on live parts is generally not permitted; the de-energized state has to be established first. The insulation to IEC 60900 is a reserve in case something is still live. Switching off the circuit breaker remains mandatory.
Why do slim blades matter on VDE screwdrivers?
On conventional VDE screwdrivers, a plastic sleeve sits on the shaft and gets in the way in deep terminals of switches and flush-mounted boxes. Wiha states that its slimFix blades are up to 33 percent slimmer thanks to integrated insulation. Wera also reduces the blade diameter in the 160 iSS/7.
Which set suits large slotted screws?
The Wera 160 iSS/7 has no blade from 6.5 mm upward. For large slotted screws up to 6.5 mm, the Gedore VDE 2170-2160 PH-077 or Felo Ergonic are the right fit, both with Phillips instead of Pozidriv. According to the manufacturer, the Felo handle has soft cushions that adapt to the hand.
Do I also need precision screwdrivers?
For eyeglass screws, battery covers on toys or model building, yes. The Wiha PicoFinish 42990 comes with six precision screwdrivers with slotted and PH00 as well as PH0, plus a holder. It is not insulated and has no place in electrical installation work.
Sources
- Wera: 160 iSS/7 screwdriver set Kraftform Plus Series 100
- Wera: Kraftform Kompakt Stubby Magazin RA 1
- Wiha: Screwdriver set SoftFinish electric slimFix (38362)
- Wiha: Precision screwdriver set PicoFinish (42990)
- PB Swiss Tools: PB 5543
- Gedore: VDE screwdriver set, 7-piece (1616048)
- Felo: General catalog 2022, Ergonic VDE set 413 961 98
- Felo: VDE tools for electricians (brochure)
- DGUV Vorschrift 3, § 6 Work on active parts
Where to buy
- Wera 160 iSS/7 SchraubendrehersatzCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Wiha SoftFinish electric slimFix (38362)Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- PB Swiss Tools PB 5543Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Gedore VDE-Schraubendreher-Satz 7-tlg. (1616048)Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Felo Ergonic VDE 413 961 98Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Wiha PicoFinish 42990Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Wera Kraftform Kompakt Stubby Magazin RA 1Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
