Contents13 sections
This guide was first published in German on handgetestet.de.
The most expensive shower enclosure is no use if it is two centimeters too narrow. That is exactly where many purchases fail, because walls in older buildings are rarely plumb, and the shower tray does not always sit where the floor plan shows it. For a curbless shower with an area of at least 120 × 90 cm, we consider a fixed walk-in panel made of 8 mm glass, such as the Schulte MasterClass Walk In M8, the most solid solution; in a small bathroom or over the bathtub, a pivot door, corner entry or folding screen is the more suitable design.
Three questions settle which of them belongs in your bathroom. Are you allowed to drill? How much space is there in front of the shower? And is there a tub there, or a tiled area without a rim?
Glass, dimensions, wall: what needs to be settled before you order
Real glass enclosures are made of toughened single-pane safety glass, known in German as ESG. Schulte states that it manufactures its glass to DIN EN 12150 (the German edition of the European standard). If it breaks, according to the manufacturer it shatters into small, blunt-edged pieces instead of long shards. That does not rule out breakage: Schulte itself points to rare spontaneous breakage caused by tiny nickel sulfide inclusions and excludes it from warranty claims.
When it comes to glass thickness, doors and freestanding panels part ways. Pivot and hinged doors get by with 5 or 6 mm, because profiles and hinges guide them. A walk-in panel hangs only on the wall profile and a support bar. Kermi advises bracing such panels unless the glass is 10 mm thick. 8 mm is a sensible middle ground, but it is heavy to carry: Schulte gives a gross weight of 94 kg for the 100 cm wide MasterClass panel, and 23 kg for the Alexa pivot door.
The wall profile compensates for walls that are out of plumb. But only within narrow limits. According to Schulte, the Alexa pivot door for 90 cm alcoves fits between 870 and 906 mm, the MasterClass panel in a 1,000 mm width between 980 and 1,005 mm, and the Alexa corner entry 80 × 80 only between 785 and 803 mm per side. So measure at the top, in the middle and at the bottom, each time from the tile to the outer edge of the tray or tub. If one of the three numbers falls outside, a made-to-measure enclosure remains, as offered by Schulte and Breuer.
To fight limescale, the manufacturers coat the glass, each under its own name: Schulte calls it fixil, Kermi CLEAN, Hüppe Anti-Plaque and Breuer CER+. Water beads off better with it. No pane becomes cleaning-free. Kermi still recommends a squeegee after every shower, and in its care instructions Breuer warns against aggressive limescale removers and scouring sponges because they attack the glass and profiles. At Schulte, the coating is often already included in the item (marked „versiegelt,“ coated), while at Breuer CER+ costs extra. With clear glass, we would always take it.
Installation calls for a drill, wall plugs and silicone. The instructions from Schulte and Breuer specify holes 6 mm in diameter and 4.2 × 45 mm screws; the joints to the wall are sealed with silicone at the end. At the front of every Schulte manual are two notes worth taking seriously: find out where the electrical and water lines run, and check the masonry, because the supplied wall plugs are not suitable for every wall. Installation takes two people. Which drill bits get through hard tiles is covered in our guide to drill bit sets (in German). And the glass panel does not replace waterproofing of the floor: Schulte assumes waterproofing according to DIN 18534 (the German standard for waterproofing interiors).
Six available enclosures, sorted by use
| Model | Design | Glass | Installation dimension (example size) | Best for |
|---|---|---|---|---|
| Schulte MasterClass Walk In M8 | Walk-in panel with stabilizing bar | 8 mm ESG | 980–1,005 mm (width 1,000) | curbless shower from 120 × 90 cm |
| Breuer Espira corner entry (type 0865) | Corner entry, two hinged doors | 6 mm ESG | 736–756 mm per side (750 × 750) | corner shower, also curbless |
| Schulte Alexa Style 2.0 pivot door in alcove | Pivot door | 5 mm ESG | 870–906 mm (width 900) | small bathroom with an alcove |
| Schulte Alexa Style 2.0 corner entry | Corner entry, two doors | 5 mm ESG | 785–803 mm per side (800 × 800) | tight corner, furniture in front of the shower |
| Schulte Alexa Style 2.0 sliding door in alcove | Sliding door | 6 mm ESG | 1,185–1,205 mm (width 1,200) | wide alcove with no room for door wings |
| Schulte Komfort bathtub screen, 2 panels (D3353) | Folding screen for the tub | 5 mm ESG | 1,120 mm wide, 1,400 mm high | rental apartment with a bathtub |
Rental apartment with a bathtub: adhesive instead of drilling
If you rent, you usually do not want holes in the tiles. Schulte has its own adhesive system for this: a two-component adhesive holds the wall profile, and after a curing time of five hours the folding screen is hung in place. It is not approved for every screen. The manufacturer marks it per item as „Klebemontage möglich“ (adhesive installation possible), and the adhesive comes as a separate kit.
Schulte Komfort bathtub screen, 2 panels (D3353)
The two-panel screen is 1,400 mm high, 1,120 mm wide and made of 5 mm ESG; according to Schulte, it is suitable for adhesive installation. Both elements fold completely against the wall, leaving the tub free for bathing. The three-panel version D3354 is available up to 1,250 mm wide, but according to the manufacturer only for drilling.
Curbless shower: open only with enough space
A walk-in panel looks calm and is quick to clean, because there is no profile at the bottom. But it only works if the water has room. Kermi specifies at least 120 × 90 cm for a shower open on one side, a length of 160 cm with two open sides, and expects splash water to reach 30 to 50 cm beyond the edge of the shower area. If there is wooden furniture in this zone, a door belongs in the plan. If you are planning a large rain shower head, like those in our guide to shower systems, you are better off adding a little more area.
Schulte MasterClass Walk In M8
The 8 mm ESG panel comes with a 1,220 mm stabilizing bar and, according to Schulte, can be installed on the shower tray or directly on the tile. In a 1,000 mm width, it fits installation dimensions from 980 to 1,005 mm. On the coated versions, fixil is applied at the factory. The weight clearly speaks against installing it alone.
Breuer Espira corner entry
Breuer manufactures in Neuwied, Germany, and has long had the Espira as its main series. The corner entry has two wide hinged doors made of 6 mm safety glass that open outward, plus hinges with a rise-and-fall mechanism. According to the manufacturer, it is suitable for curbless installation and is also available with sides of unequal length. It does need room in front of the shower for the doors to swing open.
Small bathroom: which way does the door swing?
In a small bathroom, the space in front of the shower decides. A hinged door needs its full radius in the bathroom; a pivot door also swings inward. A sliding door needs no swing area at all, but costs entry width. That is easily underestimated.
Schulte Alexa Style 2.0 pivot door in alcove
For 90 cm alcoves, Schulte specifies an entry width of 764 mm, and the glass is 5 mm thick. The door opens inward and outward; for ventilation, it can be positioned so that dripping water falls into the shower. According to the manufacturer’s price list, it is the least expensive shower door in the table and the obvious choice for a built-in alcove.
Schulte Alexa Style 2.0 corner entry
Two doors open diagonally, which is why this corner entry needs little opening depth. Schulte explicitly recommends it when a shelf, vanity or radiator stands close to the shower. In 80 × 80 cm, a 690 mm entry remains. The adjustment range of 18 mm per side is tight.
Schulte Alexa Style 2.0 sliding door in alcove
The sliding door for 120 cm alcoves has 6 mm glass and never protrudes into the room. Of a shower width of 1.20 m, however, only 492 mm of entry remain, because the fixed element takes up part of the opening. For a slim build, that is enough. If you will need a stool or assistance in later years, the pivot door is the better choice.
How we would decide
- Curbless shower from 120 × 90 cm: Schulte MasterClass Walk In M8, coated and with a stabilizing bar.
- Corner with space in front: Breuer Espira corner entry. If furniture is in the way, the Alexa corner entry from Schulte. Complete corner enclosures on a shower tray are compared in our guide to the corner shower.
- Alcove in a small bathroom: Schulte Alexa Style 2.0 pivot door. The sliding door only if there is truly no room for a door to open.
- Rental apartment with a tub: Schulte Komfort bathtub screen D3353 with the manufacturer’s adhesive kit.
- No standard width fits: a made-to-measure enclosure instead of a thick bead of silicone.
If a tub is to go into the bathroom instead of the shower, our guide to the bathtub explains dimensions, liters and the load on the floor.
If you are planning the shower completely from scratch, decide on the fittings before the enclosure. Which rough-in body goes into the wall is explained in our guide to the concealed shower system.
Frequently asked questions
How do I measure correctly for a shower enclosure?
Measure at the top, in the middle and at the bottom, each time from the tile to the outer edge of the tray or tub. The wall profile only compensates for out-of-plumb walls within narrow limits; for the Alexa corner entry 80 × 80, for example, between 785 and 803 mm per side. If one value falls outside, a made-to-measure enclosure remains, as offered by Schulte and Breuer.
What glass thickness does a walk-in shower need?
Pivot and hinged doors get by with 5 or 6 mm, because profiles and hinges guide them. A walk-in panel hangs only on the wall profile and a support bar; Kermi advises bracing it unless the glass is 10 mm thick. 8 mm is the middle ground, but according to Schulte the 100 cm wide MasterClass panel weighs 94 kg gross.
Can you install a shower enclosure without drilling?
For bathtub screens, Schulte offers an adhesive system: a two-component adhesive holds the wall profile, and after a curing time of five hours the folding screen is hung in place. This is only approved for items marked "adhesive installation possible," and the adhesive comes as a separate kit. According to the manufacturer, the three-panel version D3354 is intended for drilling only.
How much space does a shower without a door need?
Kermi specifies at least 120 × 90 cm for a shower open on one side, and a length of 160 cm with two open sides. On top of that, splash water reaches 30 to 50 cm beyond the edge of the shower area. If there is wooden furniture in this zone, a door belongs in the plan; with a large rain shower head, add a little more area.
Does an anti-limescale coating help?
The manufacturers apply coatings under their own names: Schulte as fixil, Kermi as CLEAN, Hüppe as Anti-Plaque and Breuer as CER+. Water beads off better with it, but no pane becomes cleaning-free. Kermi still recommends a squeegee after every shower, and Breuer warns against aggressive limescale removers and scouring sponges. With clear glass, we would always take the coating.
Pivot door or sliding door in a small bathroom?
The pivot door swings both in and out and, according to Schulte, leaves a 764 mm entry in a 90 cm alcove. The sliding door never protrudes into the room, but of a shower width of 1.20 m, only 492 mm of entry remain. If you will need a stool or assistance in later years, the pivot door is the better choice.
Sources
- Schulte: Shower enclosures, ESG to DIN EN 12150 and note on spontaneous breakage
- Schulte: MasterClass Walk In M8 with stabilizing bar
- Schulte: Alexa Style 2.0 pivot door in alcove
- Schulte: Alexa Style 2.0 corner entry
- Schulte: Alexa Style 2.0 sliding door in alcove
- Schulte: Two-panel bathtub screen for adhesive installation
- Schulte: Einfach Kleben adhesive system for bathtub screens
- Breuer: Espira corner entry with installation instructions
- Breuer: Care instructions (PDF)
- Kermi: Walk-in showers, minimum dimensions and splash zone
- Kermi: Care and cleaning, CLEAN coating
- Hüppe: Select+ walk-in with Anti-Plaque coating
Where to buy
- Schulte MasterClass Walk In M8 (100 x 200 cm)Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Schulte Alexa Style 2.0 Pendeltür in NischeCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Breuer Espira EckeinstiegCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Schulte Alexa Style 2.0 EckeinstiegCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Schulte Alexa Style 2.0 Schiebetür in NischeCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Schulte Komfort Badewannenaufsatz 2-teilig D3353Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
