Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Stump Grinder: Rent or Buy, Grinding Depth, Protective Gear

Rent or buy a stump grinder? When a gas-powered grinder pays off, how deep it cuts and which protective gear the manufacturer requires.

handgetestet editorial team · Updated November 17, 2026
Scheppach SGM4200 gas-powered stump grinder with cutting disc, pneumatic tires and guide handleImage: scheppach (Pressebild)
Contents10 sections

This guide was first published in German on handgetestet.de.

The tree is down, the wood is split. What remains is a stump that will sit in the lawn for years if nobody does anything. With an old spruce, digging it out often means half a day of work with spade, ax and cable winch. A stump grinder instead rasps it into chips. If you have several stumps on your property or want to clear a hedge with root stocks, the Scheppach SGM4200 is a powerful gas-powered grinder for private use. For a single stump, buying one does not pay off.

Rent or buy?

The most honest question first. Home improvement stores rent out stump grinders by the day, and wear on the teeth is included in the rental price. Using the price list of a large home improvement chain, the purchase price of the SGM4200 is reached after about seven rental weekends.

Buying therefore pays off for people who clear land regularly. Orchard meadows, woodland plots, horse paddocks with hedges, home sellers with an overgrown garden. If you only want to get rid of the stump of the old birch, rent a grinder or hire a landscaping company.

How does a grinder like this work?

A heavy steel disc with carbide teeth spins fast and is swung sideways across the stump. With every sweep, it removes a few centimeters of wood. Then the disc is lowered, and the whole thing starts again.

Scheppach describes this precisely in the instructions. First engage the parking brake, open the throttle fully, then guide the grinder from left to right until the desired depth is reached, and never take too much material in one pass. Pushing slows the engine and strains the belt.

How deep does it need to grind?

How deep depends on your plans afterward. New lawn needs less depth than a tree in the same spot or a paved path. According to the manufacturer, the SGM4200 reaches 235 mm below ground and 600 mm above it. The second figure is handy: tall stumps do not first have to be cut down to ground level with a saw.

ModelEngine according to manufacturerGrinding depth below / above groundBest for
————
Scheppach SGM4200420 cm³, 9 kW (12 hp)235 mm / 600 mmseveral stumps, land clearing, orchard meadow
Crossfer GBS-150420 cm³, 11 kW (15 hp)225 mm / 515 mmbuyers who want to order from a specialist online retailer

Scheppach SGM4200

According to the data sheet, the cutting disc measures 300 mm with a thickness of 90 mm and carries nine tungsten carbide teeth. The 420 cm³ four-stroke engine drives it via a double V-belt. According to the instructions, an automatic low-oil shutoff stops the engine when the oil level is too low, and an emergency stop bar on the handle stops it as soon as you let go. It is started with a recoil pull cord, and the tank holds 6.5 liters.

At 106 kg, the grinder is no lightweight. On pneumatic tires with an off-road tread, it can be pushed but not carried. For transport, you need a ramp and two people or a trailer with a low loading edge. Its dimensions of 173 × 79 cm fit through most garden gates.

Crossfer GBS-150

Crossfer also states 420 cm³ for its grinder but rates it at 15 hp. On paper, that is more. Otherwise, the figures are close: nine teeth with tungsten carbide tips, a 6.5-liter tank, 225 mm grinding depth below ground. At 515 mm above ground, it does not reach as high. The weight is not reliably stated on the manufacturer’s website. One point counts against it: according to the retailer, the operating instructions currently come only in English, and the German version is sent on request. On a machine with an exposed cutting disc, that is no small detail.

How loud and dangerous is it?

Very loud. Scheppach states a guaranteed sound power level of 103 dB, and 89.6 dB at the operator’s ear. Hearing protection is mandatory, and the neighbors should know in advance. According to the instructions, hand-arm vibration is 6.4 m/s². Plan breaks.

More dangerous than the noise are the chips, stones and clods of earth that shoot out of the cutting area. The instructions require that no people or animals be within a radius of at least 15 meters. According to the manufacturer, anyone under 18 must not operate the grinder.

Scheppach lists safety goggles, hearing protection, safety shoes, cut-resistant clothing and work gloves as protective gear. Before grinding, remove stones, wire and metal scraps, including old nails in the stump. Where utility lines might run nearby, ask your utility companies for plans.

How much time does maintenance take?

Less than you might think, more than none. The instructions call for an oil change every 100 operating hours, and the spark plug is checked for the first time after 20 hours. After that, every 50 hours.

The belt matters more. If the V-belt gives more than 10 to 15 mm under thumb pressure, it needs to be retensioned; if it is cracked or glazed, it gets replaced. To do that, the wheel with the brake disc has to come off. An hour in the workshop the first time you do it.

And the teeth? They wear, especially when soil and stones are stuck in the stump. Budget for replacements before you get started.

What happens to the chips?

They stay in the hole. Some of them can be spread as mulch under shrubs. If lawn is to grow there, clear out the chips and fill the hole with topsoil. Smaller branch cuttings from the clearing are handled by a shredder; see our garden shredder guide.

How we would decide

  • One or two stumps: rent or hire a specialist.
  • Clearing every year, orchard meadow, edge of a wood: Scheppach SGM4200, also because of the German-language instructions and the 60 cm grinding height.
  • If you prefer a particular online retailer: Crossfer GBS-150, but request the German instructions beforehand.

If the tree still has to come down first, the right saw is in our cordless chainsaw guide.

Frequently asked questions

Should you rent or buy a stump grinder?

Home improvement stores rent out stump grinders by the day, and wear on the teeth is included in the rental price. Based on the price list of a large home improvement chain, the purchase price of the Scheppach SGM4200 is reached after about seven rental weekends. Buying pays off for people who clear land regularly; for one or two stumps, rent or hire a specialist.

How deep does a stump grinder cut?

According to the manufacturer, the Scheppach SGM4200 reaches 235 mm below ground and 600 mm above it, the Crossfer GBS-150 225 and 515 mm. How deep you need to go depends on your plans afterward: new lawn needs less depth than a tree or a paved path in the same spot.

How do you use a stump grinder correctly?

According to the Scheppach instructions, first engage the parking brake, open the throttle fully and guide the grinder over the stump from left to right, never taking too much material in one pass. Then lower the disc and start again. Pushing slows the engine and strains the belt.

What safety distances apply when grinding?

According to the instructions, no people or animals may be within a radius of at least 15 meters, because chips and stones shoot out of the cutting area. Anyone under 18 must not operate the grinder. Scheppach lists safety goggles, hearing protection, safety shoes, cut-resistant clothing and work gloves.

How loud is a stump grinder?

Very loud: Scheppach states a guaranteed sound power level of 103 dB for the SGM4200, and 89.6 dB at the operator's ear. According to the instructions, hand-arm vibration is 6.4 m/s², so plan breaks.

What happens to the chips after grinding?

They stay in the hole. Some of them can be spread as mulch under shrubs. If lawn is to grow there, clear out the chips and fill the hole with topsoil.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.