Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Buying a Circular Saw Blade 2026: Teeth, Diameter, Material

Buying a circular saw blade in 2026: diameter, kerf width and tooth count for wood, laminate or metal. Bosch, Festool, Makita and CMT compared.

handgetestet editorial team · Updated November 17, 2026
Contents14 sections

This guide was first published in German on handgetestet.de.

A circular saw blade has to fit the saw first and the material second, never the other way around. For cutting wood to size with a corded 190 mm circular saw, the Bosch Expert for Wood with 24 teeth is a sensible starting point; if you cut veneered panels on the guide rail of a Festool TS 55, you are better off with Festool’s fine W48. Laminate, HPL and steel call for blades of their own. A wood blade will not get you far there.

Frayed edges, black burn marks in the cut, a saw that struggles its way through the board: most of the time, the tool is not to blame. The blade is, the one that came along with some purchase at some point and was meant for a different job.

Three dimensions that are not up for negotiation

Before talking about teeth, get out the operating manual. It specifies the diameter, bore and kerf width. The diameter is fixed by the blade guard and riving knife. Festool shows how tight this is: according to the manufacturer, the TS 60 K is designed exclusively for 168 mm blades. A 160 mm blade, a mere eight millimeters smaller, does not belong in it.

The bore is quicker to sort out. In this comparison, the 160 and 165 mm blades for plunge saws and cordless saws have a 20 mm bore, while the 190 and 250 mm wood blades have 30 mm. Bosch states that its blades can be used with or without reducing rings. A ring makes the arbor hole smaller. It never makes it larger.

The third figure determines the riving knife, and this is exactly where bad purchases happen. Festool writes that only blades with a 1.8 mm kerf belong in the TS 55 F and the TSC 55 K. The TS 55 R and the TSC 55 have a wider knife, and the 1.8 mm blades do not fit them; according to Festool, this cannot be converted for approval reasons. The BG BAU, Germany’s statutory accident insurance for the construction industry, likewise requires the riving knife to be selected according to the size and thickness of the saw blade. If you are still looking for the saw itself, you will find the differences between track saws and circular saws in our guide to plunge saws and circular saws (in German).

Few teeth for speed, dense rows of teeth for clean edges

The relationship becomes clearest when you put two blades of the same diameter side by side. For its 55 series saws, Festool offers a 160 mm blade with only 12 teeth and a 20-degree hook angle, designed for rip cuts in solid wood with little effort. The W48 next to it has 48 teeth and a 5-degree hook angle. According to the manufacturer, it is meant to deliver clean, low-tearout crosscuts in solid wood, coated and veneered panels and MDF.

The rule of thumb that follows is simple. If you rip planks lengthwise, you need large gullets and few teeth so the blade does not clog and overheat. If you cut across the grain or through a melamine layer, you need a dense row of small teeth that each remove only a little material. A 190 mm blade with 24 teeth sits in between and handles construction lumber, battens and rough panel cuts.

The hook angle tells you how aggressively the tooth attacks. Wood blades have a clearly positive angle, the Makita Efficut as much as 23 degrees. Blades for laminate and HPL work with a zero or slightly negative angle: Festool specifies minus 5 degrees for the TF52, Bosch 0 degrees for its HPL blade. The tooth then tends to scrape rather than bite into the hard top layer.

That leaves the tooth shape. Festool abbreviates the alternate top bevel tooth as W, meaning teeth beveled alternately left and right, for wood. With the same manufacturer, TF stands for the trapezoidal flat tooth used for laminate, HPL, solid surface materials and acrylic glass.

Laminate, HPL and steel: where the wood blade stops

Cutting an HPL countertop or laminate flooring with a general-purpose wood blade works a few times. It will not give you a clean edge, though. Festool and Bosch carry dedicated blades with a flat tooth geometry for this, Festool at 160 mm, Bosch at 190 mm.

Steel is a chapter of its own. The Bosch Expert for Steel is built for dry cutters, that is, metal-cutting circular saws, and according to Bosch it is rated for a maximum of 4,000 revolutions per minute. The BG BAU stipulates that the maximum permissible speed must be marked on carbide-tipped blades and must not be exceeded. So check the manual of your saw. If it runs faster at no load than the blade allows, the blade does not go on it, even if the diameter and bore are right.

And the battery? Thinner blades remove less material and need less energy. For its Efficut, just 1.4 mm thin, Makita claims up to 2.4 times the battery runtime compared with a standard blade. That is a manufacturer figure, but the direction is right: on a cordless saw, a thin-kerf blade is worth it, provided the manual of the saw permits it.

Seven circular saw blades side by side

ModelDimensions (Ø × kerf × bore)Teeth, tooth shapeBest for
Bosch Expert for Wood 2608644047190 × 2.6 × 30 mm24 teethCutting wood to size with a corded circular or plunge saw
Festool HW 160×2,2×20 W48 Wood Fine Cut160 × 2.2 × 20 mm48, alternate top bevel, 5°Furniture panels and crosscuts with the TS 55, TSC 55
Makita Efficut B-62985165 × 1.4 × 20 mm25, 23°Makita cordless circular saws
Festool HW 160×1,8×20 TF52 Laminate/HPL160 × 1.8 × 20 mm52, trapezoidal flat tooth, −5°Laminate and HPL with the TS 55 F, TSC 55 K
Bosch Expert for High Pressure Laminate 2608644135190 × 2.6 × 30 mm56, 0°HPL countertops with a 190 mm circular saw
CMT 285.060.10M250 × 3.2 × 30 mm60, alternate top bevelFine cuts on table and miter saws with a 250 mm blade
Bosch Expert for Steel 2608643056190 × 2.0 × 20 mm40, max. 4,000 rpmSteel with a metal-cutting circular saw

Bosch Expert for Wood: the standard choice at 190 mm

Bosch approves the blade for corded circular saws and plunge saws, for softwood and hardwood as well as engineered wood. The carbide teeth are coated, and according to the manufacturer it lasts up to twice as long as the simpler Eco for Wood. With 24 teeth, it is a workhorse blade for construction lumber and cutting to size, not a fine-cut blade for furniture edges.

Festool W48: fine, but not for every 55

Festool lists furniture making, kitchen fitting and panel cutting as applications. According to the manufacturer, the blade fits the TS 55, TSC 55, ATF 55 and AP 55. Pay attention to the 2.2 mm kerf. Owners of a TS 55 F or TSC 55 K need the 1.8 mm version.

Makita Efficut B-62985: built for battery power

With a 1.4 mm kerf, the Efficut is one of the narrowest blades in this comparison. Makita ships it as standard with the DHS660, DHS661, DHS680 and HS012G cordless circular saws and promises up to 2.5 times faster cuts in wood. If you own one of these saws, this is simply the replacement blade in the original size.

Festool TF52: laminate and HPL on the rail

According to Festool, the trapezoidal flat tooth with a minus 5-degree hook angle is designed for laminate, HPL, melamine resin panels, solid surface materials and acrylic glass. With a 1.8 mm kerf, it belongs in the TS 55 F, TSC 55 K and the HK 55 family. For a kitchen with HPL fronts, it is the right companion to the wood blade.

Bosch Expert for High Pressure Laminate

The counterpart for 190 mm saws. Bosch specifies 56 teeth, a 0-degree hook angle and approval up to 10,000 revolutions per minute, for corded circular and plunge saws. As material, the manufacturer lists only HPL. It is not meant for solid wood.

CMT 285.060.10M: for the stationary saw

This blade belongs in the workshop, not on the job site. CMT carries it in its industrial range for fine cut-off work: 250 mm, 60 alternate top bevel teeth, 3.2 mm kerf. According to the manufacturer, laser-cut expansion slots are meant to reduce vibration and noise by 10 percent, and a PTFE coating is meant to slow resin buildup. What else sets table saws and miter saws apart is covered in our guides to the table saw and the miter saw (in German).

Bosch Expert for Steel: for the metal saw only

40 teeth, 2 mm kerf, 20 mm bore. Bosch approves the blade for corded dry cutters and sets the limit at 4,000 revolutions. It has no business in a wood circular saw, even if the bore fits.

Care and safety according to the BG BAU rules

A good blade lasts a long time if you let it. Festool states that its saw blades can be resharpened up to ten times. So a dull carbide blade does not have to be thrown away right away. Damage is a different matter. In its information sheet on circular saws and job-site circular saws, the BG BAU lists clear points:

  • Take blades with cracks, deformations or burn marks out of service.
  • Only use blades that bear the manufacturer’s name or mark; on carbide-tipped composite blades, the maximum permissible speed must also be indicated.
  • Prefer low-noise saw blades and wear hearing protection.
  • In solid wood, set the cutting depth no more than 10 mm greater than the thickness of the workpiece.
  • Extract wood dust when working indoors.

The cutting depth is easily forgotten. For a 30 mm thick board, the rule means: set no more than 40 mm. Anything more achieves nothing.

How we would decide

  • Corded 190 mm circular saw, construction lumber and cutting to size: Bosch Expert for Wood with 24 teeth.
  • Festool TS 55 or TSC 55 with the wide knife, furniture and kitchen panels: Festool W48 with 2.2 mm.
  • TS 55 F or TSC 55 K, plus laminate or HPL: Festool TF52 with 1.8 mm.
  • HPL countertop with a 190 mm saw: Bosch Expert for High Pressure Laminate.
  • Makita cordless saw with 165 mm: the Efficut B-62985 as the original blade.
  • Table or miter saw with 250 mm and a 30 mm bore, fine crosscuts: CMT 285.060.10M.
  • Steel profiles and sheet metal with a metal-cutting circular saw: Bosch Expert for Steel, after checking the speed.

One last piece of advice. Buy two suitable blades rather than one supposedly universal one. A coarse one for wood and a fine one for panels cover most of the work in a home workshop.

For coated panels, the scoring blade matters as well as the main blade; when you need one is explained in our guide to the panel saw (in German).

Frequently asked questions

Which circular saw blade fits my saw?

The operating manual specifies the diameter, bore and kerf width, and there is no room for negotiation on any of them. The diameter is fixed by the blade guard and riving knife; according to the manufacturer, the Festool TS 60 K only takes 168 mm blades. A reducing ring makes the bore smaller, never larger.

Why does the kerf width of a saw blade matter?

It has to match the riving knife. Only blades with a 1.8 mm kerf belong in the Festool TS 55 F and TSC 55 K; they do not fit the TS 55 R and TSC 55, which have a wider knife. The BG BAU (German statutory accident insurance for the construction industry) likewise requires the riving knife to be selected according to the size and thickness of the blade.

How many teeth does a circular saw blade need?

For rip cuts in thick planks, few teeth with large gullets so the blade does not clog and overheat. For crosscuts and melamine surfaces, a dense row of small teeth. A 190 mm blade with 24 teeth sits in between and handles construction lumber, battens and rough panel cuts.

Which saw blade do I need for laminate and HPL?

A blade with a flat tooth geometry and a zero or slightly negative hook angle, so the tooth scrapes rather than bites. Festool offers the TF52 with a trapezoidal flat tooth and minus 5 degrees for 160 mm saws, and Bosch the Expert for High Pressure Laminate with 0 degrees for 190 mm saws.

Can I cut steel with a circular saw?

Only with a steel blade in a metal-cutting circular saw. The Bosch Expert for Steel is rated for a maximum of 4,000 rpm. If your saw runs faster at no load than the blade allows, the blade does not go on it, even if the diameter and bore are right.

When does a circular saw blade need replacing?

According to the BG BAU, blades with cracks, deformations or burn marks must be taken out of service. A dull carbide blade, on the other hand, does not have to go straight away: Festool states that its blades can be resharpened up to ten times. In solid wood, set the cutting depth no more than 10 mm greater than the thickness of the workpiece.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.