Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet
This page in 9 more languages

DeutschNederlandsFrançaisItalianoEspañolPolskiУкраїнськаTürkçeالعربية

Continuous and LED Video Lights 2026: Studio Buying Guide

Continuous and LED video lights 2026: amaran, Godox, Nanlite, Elgato and Neewer at a glance – CRI/TLCI, lux, fans, Bowens mount and batteries.

handgetestet editorial team · Updated November 16, 2026
Contents15 sections

This guide was first published in German on handgetestet.de.

Good video lighting is less a question of watts than of surface area. For interviews and small studios, we consider a COB light with a Bowens mount and a softbox the most versatile solution, for example the amaran 200x S for white light or the amaran 150c when color is needed too. For mobile use with batteries, the Godox ML60II Bi and the Nanlite Forza 60C are worth considering.

And at your desk? There, a flat panel such as the Elgato Key Light Air MK.2 or a Neewer set is often enough. A big COB light next to the monitor would simply be overkill.

COB or panel: what’s the difference?

COB lights concentrate a lot of light on a small surface. Bright, but harsh without a modifier. Only a softbox or lantern makes the light soft. Panels give off broader light straight out of the box but are usually weaker. So if you buy a COB light, you almost always buy accessories too.

For accessories, the Bowens mount for softboxes, lanterns and spot attachments has become widely established. Smaller lights often have their own bayonet and need an adapter. Not a big deal, but you should know before you buy.

Which numbers on the spec sheet count?

First CRI and TLCI. Both describe how natural skin tones and colors look under the light; TLCI was developed specifically for video cameras. A value of about 95 or higher is considered very good. If the figure is missing entirely, ask. Lux figures are trickier. They are only comparable at the same distance and with the same accessories, and manufacturers like to quote the figure with a reflector, which is far higher than without one. Behind a softbox, only part of it remains.

Is white enough, or do I need color?

Bi-color mixes warm and cool white. For a normal interview, that’s enough. RGB can also produce any color, for example for accents in the background.

Will the microphone hear the fan?

With powerful COB lights it certainly can, because they can’t do without a fan. A quiet mode or running entirely without the fan helps, but often costs output. If you shoot with the microphone close to the light, choose models with a fan that can be switched off, or panels, and don’t run at full power.

Battery, power adapter, app?

Some lights take NP-F or V-mount batteries via a grip, larger ones run only on a power adapter or a separate battery station, and some desk panels run on USB-C. An app saves you walking over to the stand. If you’re planning several lights, it’s better to stick with one brand. Then they all run in the same app.

How many lights does an interview need?

Often two. A soft key light stands at an angle in front of the person, and a weaker light handles the background or rim. You’ll find the right camera in our mirrorless camera buying guide (in German). If you mainly film yourself, our article on the right vlog camera (in German) will help.

Six lights, from desk to studio

ModelDesign and lightColor and values according to manufacturerBest for
amaran 200x SCOB, 200 W, Bowensbi-color 2,700–6,500 K, CRI 95+, TLCI 98+key light for interviews and studio
amaran 150cCOB, 150 W, BowensRGBWW, 2,500–7,500 K, CRI 95+, TLCI 95+studio with color accents
Nanlite Forza 60CCOB, 88 W, FM mount, Bowens adapterRGBLAC, 1,800–20,000 K, CRI 96, TLCI 95mobile with battery and color
Godox ML60II BiCOB, around 70 W, Godox mountbi-color 2,800–6,500 K, CRI 96+, TLCI 97+compact and mobile, tight budget
Elgato Key Light Air MK.2panel, up to 2,100 lm, USB-C2,900–7,000 K, CRI above 94desk, streaming, video calls
Neewer 660 PRO II (2-pack)panel, 50 W each, with standsRGB, 3,200–5,600 K, CRI 97+starter set for two lights

amaran 200x S: reserves for a large softbox

amaran is Aputure’s entry-level brand, and according to the manufacturer this bi-color light delivers 200 W. With the included reflector, amaran states 45,400 lux at one meter, and 6,400 lux without accessories. That gap alone shows how little reflector figures say about everyday use behind fabric. Even so, there’s enough light left behind a large softbox. It’s operated on the unit or via the Sidus Link app. Battery operation requires a separately available battery station for two batteries.

amaran 150c: less light, but color

The color model in a similar design. The 150c mixes RGB with warm and cool white and covers 2,500 to 7,500 K. With the reflector, it reaches over 15,000 lux at one meter according to amaran, considerably less than the 200x S. That falls short as the only key light. As a complement for a colored background or effects, it works well, ideally next to a bright bi-color key light. Bowens mount, power adapter or separate battery station, as with its big brother.

Nanlite Forza 60C: small, colorful, battery-ready

Six color channels and an unusually wide range of 1,800 to 20,000 K are packed into a compact housing. Nanlite states around 12,800 lux at one meter with a reflector. In quiet mode, the fan is said to reach about 22 dB(A); if you switch it off completely, the light throttles itself to 25 percent output, according to the manufacturer. NP-F or V-mount batteries sit in grips, and a Bowens adapter is included in the kit.

Godox ML60II Bi: light and frugal

Around 500 g without accessories, a maximum power draw of about 70 W. Godox states CRI 96+ and TLCI 97+. For a tight budget, those are very respectable values. Power comes from the adapter, an NP-F battery or, with suitable accessories, a V-mount battery, and it can also be controlled via the Godox app. Bowens softboxes need an adapter, because Godox uses its own mount here.

Elgato Key Light Air MK.2: it all depends on the power adapter

A flat panel for the desk, powered via a USB-C cable. According to Elgato, though, it only reaches full brightness, a maximum of 2,100 lumens, with a source of about 30 W or more. Weaker adapters or a power bank make it noticeably dimmer. A power adapter isn’t included. If you overlook that, you’ll be annoyed later by a dull image. It’s controlled via an app on a computer or phone.

Neewer 660 PRO II (2-pack): two lights to get started

Two RGB panels of 50 W each and two stands that extend from 92 to 200 cm. Neewer states about 2,200 lux at one meter without a diffuser and CRI 97+; a TLCI value is missing. The panels run on the power adapter or on NP-F batteries, which are sold separately. As a first step toward two-light setups, it’s an inexpensive route.

So: which light for which shoot?

For interviews and studio work with a softbox, we’d take the amaran 200x S as the key light along with a Bowens softbox. If a colored background is added, the amaran 150c complements it, ideally next to a bright bi-color key light. On the go with batteries, the Nanlite Forza 60C makes its own case when color is needed. Otherwise, the lighter Godox ML60II Bi is enough. For quiet shoots with the microphone close to the light, what we said about the fan above applies. Desk, stream and video calls? Elgato Key Light Air MK.2. And for two lights on a tight budget, there’s the Neewer 660 PRO II with stands.

Frequently asked questions

What is the difference between a COB light and an LED panel?

COB lights concentrate a lot of light on a small surface and are harsh without a modifier; only a softbox or lantern makes the light soft. Panels give off broader light straight out of the box, but are usually weaker. So if you buy a COB light, you almost always buy accessories too.

Which spec sheet values matter for video lighting?

First CRI and TLCI. Both describe how natural skin tones and colors look; TLCI was developed specifically for video cameras. A value of about 95 or higher is considered very good. Lux figures are only comparable at the same distance and with the same accessories, and manufacturers like to quote the figure with a reflector.

Is bi-color enough, or do you need RGB?

For a normal interview, bi-color, which mixes warm and cool white, is enough. RGB can also produce any color, for example for accents in the background. The amaran 150c, for instance, works well as a color light alongside a bright bi-color key light, but it falls short as the only key light.

How many lights does an interview need?

Often two. A soft key light stands at an angle in front of the person, and a weaker light handles the background or rim. For getting started on a small budget, the Neewer 660 PRO II offers two RGB panels of 50 W each plus two stands.

Does a COB light's fan interfere with audio recording?

With powerful COB lights it certainly can, because they can't do without a fan. A quiet mode or fanless operation helps, but often costs output. The Nanlite Forza 60C, for example, throttles itself to 25 percent with the fan switched off, according to the manufacturer. With a microphone close to the light, panels are an alternative.

Why doesn't the Elgato Key Light Air MK.2 reach full brightness?

According to Elgato, the panel only reaches its full brightness of 2,100 lumens with a USB-C source of about 30 W or more. Weaker power adapters or a power bank make it noticeably dimmer, and a power adapter isn't included.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.