Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Buying a Cordless Angle Grinder 2026: 125 mm, Brushless, Safe

Buying a cordless angle grinder in 2026: 115 or 125 mm, brake, paddle switch, kickback. Bosch, Makita, Metabo, DeWalt and Milwaukee compared.

handgetestet editorial team · Updated November 17, 2026
Contents11 sections

This guide was first published in German on handgetestet.de.

The disc snags, and the machine kicks back. That exact moment is what a cordless angle grinder is about, not speed. So buy a brushless 125 mm tool with kickback shutoff, restart protection and a run-down brake, and buy it within the battery system already sitting in your workshop. If you have not settled on a system yet, the Bosch GWS 18V-10 is the well-balanced candidate. Want a dead-man function? Then the Makita DGA519 with paddle switch.

Disc size and battery system first

The widest selection of cutting, grinding and flap discs exists for 125 mm. A 115 mm model cuts slightly less deep and is hardly any lighter. Many models are offered in both sizes; according to its operating instructions, Bosch lists the GWS 18V-10 with 100, 115 and 125 mm. A larger disc on the smaller machine? Not an option. According to the manufacturer, the diameter and thickness of the accessory must match the tool’s rated dimensions, or the guard no longer shields properly.

The expensive parts are mainly the battery and charger. If a brand’s drill driver and impact driver are already on the shelf, buy the grinder as a bare tool and save yourself a second charger. How the platforms differ is explained in our guide to battery systems. Usually the drill driver comes first; for that, see our overview of cordless drill drivers.

All the tools here are brushless. Metabo speaks of a maintenance-free motor because there are no carbon brushes to wear out. The bigger differences show up in the switch. A paddle switch turns off as soon as you let go. On some models, a slide switch can be locked on, which is convenient for long cuts, but in an emergency the machine keeps running. Without a brake, the disc keeps spinning for a few seconds after switching off; with the brake version, it takes less than two seconds to come to a stop, according to Milwaukee. And the mount: an M14 thread takes any standard disc, X-LOCK changes faster but requires discs with an X-LOCK mount.

What accident insurers and manufacturers say about safety

The Bosch operating instructions describe kickback precisely. If the disc jams, the tool is accelerated against the direction of rotation. This leads to a few rules found in every manufacturer’s instructions:

  • The disc’s permissible speed must be at least as high as the machine’s maximum speed.
  • After every disc change, run the tool for one minute at maximum speed. While doing so, you and any bystanders stay out of the plane of the disc.
  • Always wear safety glasses and, depending on the job, a full face shield, hearing protection, a dust mask and gloves.
  • Only use approved abrasives with the guard intended for them.

On the switch, occupational safety takes a clear position. KomNet, a portal of the German state of North Rhine-Westphalia (NRW), states that restart protection on an angle grinder is implemented through a switch that must be held down continuously. If the risk assessment shows that a tool does not shut off after jamming, the employer may withdraw models with a lockable switch from use. Which guards are suitable for angle grinders is described in DGUV Information 209-002 „Schleifen“ (Grinding) from the German Social Accident Insurance.

Often underestimated: vibration. For hand and arm, the German Noise and Vibration Occupational Safety Ordinance (Lärm- und Vibrations-Arbeitsschutzverordnung) sets an exposure action value of 2.5 m/s² and a limit value of 5 m/s² over eight hours. For grinding, Makita specifies 7.0 m/s² for the DGA519, Bosch 6.7 m/s² for the GWS 18V-10. Long daily grinding work therefore means: limit your working time on the tool.

Six 125 mm cordless angle grinders

ModelNo-load speed according to manufacturerSafety according to manufacturerBest for
Bosch GWS 18V-109,000 rpm, 2.1 kg without batteryKickBack Control, restart protection, run-down brakeBosch Professional users, also available as 115 mm
Makita DGA5193,000 to 8,500 rpm, variablePaddle switch, AFT, ADT, motor brake, restart protectionMakita LXT users who want a dead-man function
Milwaukee M18 FSAG125XB8,500 rpmBrake under 2 s, anti-kickback, restart protection, soft startM18 users with lots of cutting work
DeWalt DCG4059,000 rpmElectronic clutch, brake, restart protection18 V XR users
Metabo W 18 L BL 9-12510,000 rpm, 1.5 kg without batterySafety shutoff, restart protection, soft startCAS users looking for a light tool
Bosch GWS 18V-711,000 rpm, 1.6 kg without batteryNot specified on the product pageOccasional grinding jobs in the Bosch system

Bosch GWS 18V-10

According to Bosch, the GWS 18V-10 has everything that matters after a jam: kickback shutoff, restart protection and run-down brake. The guard and clamping nut can be adjusted without tools. It runs in the AMPShare system and takes normal M14 discs. Watch the suffix: P, SC and PSC stand for different equipment levels.

Makita DGA519

Makita combines a paddle switch, motor brake and the AFT and ADT shutoff functions in this tool. Speed is adjustable between 3,000 and 8,500 rpm, which gives you leeway for polishing and heat-sensitive material. One drawback remains the X-LOCK mount: your existing M14 discs will not fit, so you need new ones.

Milwaukee M18 FSAG125XB

The „B“ at the end is what matters. According to Milwaukee, the version without the B has no brake; the XB stops the disc in under two seconds. According to the data sheet, it is operated via a lockable slide switch, and the cutting depth is 33 mm according to the manufacturer. With FIXTEC, you change the disc without a wrench.

DeWalt DCG405

On the DeWalt, an electronic clutch disengages when the disc jams. A brake and restart protection come on top. According to the manufacturer, the clutch and brake together are meant to reduce the risk of kickback. A protective mesh on the cooling vents keeps grinding dust away from the motor.

Metabo W 18 L BL 9-125

1.5 kg without battery. None of the six tools is lighter. Metabo lists electronic safety shutoff, soft start and restart protection, but does not mention a brake. The battery fits the CAS system, which many brands share.

Bosch GWS 18V-7

Bosch compares its performance to a 700-watt corded tool. That is enough for deburring, rust removal and short cuts. However, the product page mentions neither kickback shutoff nor a brake. The gap to the manufacturer’s suggested retail price of the GWS 18V-10 is small, and as long as Bosch does not specify the safety functions, we consider the savings too small.

How we would decide

  • You do not have a system yet or use Bosch Professional: GWS 18V-10, in 115 mm if needed.
  • You work with Makita LXT and want to be able to let go: DGA519, provided you accept switching to X-LOCK discs.
  • You have Milwaukee M18: FSAG125XB, not the variant without a brake.
  • You have DeWalt 18 V XR: DCG405.
  • You have CAS batteries and need a light tool: W 18 L BL 9-125, without a brake.
  • Only occasional deburring: GWS 18V-7, although the extra cost of the GWS 18V-10 is small.

In the end, the machine protects you only as well as the disc and guard. A single incorrectly mounted disc wipes out any advantage the electronics provide.

Frequently asked questions

Angle grinder with 115 or 125 mm?

The widest selection of cutting, grinding and flap discs exists for 125 mm. A 115 mm model cuts slightly less deep and is hardly any lighter. A larger disc on a smaller machine is not an option, because the guard then no longer shields properly.

Paddle switch or slide switch on an angle grinder?

A paddle switch turns off as soon as you let go. On some models, a slide switch can be locked on, which is convenient for long cuts, but in an emergency the machine keeps running. According to KomNet NRW, an employer may withdraw models with a lockable switch from use, depending on the risk assessment.

What is the difference between M14 and X-LOCK?

An M14 thread takes any standard disc. X-LOCK changes faster but requires discs with an X-LOCK mount. For the Makita DGA519, that means your existing M14 discs will not fit; you need new ones. The Bosch GWS 18V-10 takes normal M14 discs.

Why is a run-down brake important?

Without a brake, the disc keeps spinning for a few seconds after switching off. With Milwaukee's brake version, it takes less than two seconds to come to a stop, according to the manufacturer. With the Milwaukee M18 FSAG125, the B in the name is therefore what matters; without the B, there is no brake.

What do I need to keep in mind after changing a disc?

According to the manufacturer's instructions, run the tool for one minute at maximum speed after every change, while you and any bystanders stay out of the plane of the disc. The disc's permissible speed must be at least as high as that of the machine. Safety glasses are always mandatory.

How long can you work with an angle grinder?

That depends on the vibration. The German Noise and Vibration Occupational Safety Ordinance (Lärm- und Vibrations-Arbeitsschutzverordnung) sets an exposure action value of 2.5 m/s² and a limit value of 5 m/s² over eight hours for hand and arm. For grinding, Makita specifies 7.0 m/s² for the DGA519, Bosch 6.7 m/s². Long grinding work therefore means limiting your time on the tool.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.