Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Counter Chairs: Choosing Seat Height, Foot Ring and Casters

Counter chairs for reception, checkout and lab: which seat height you need, why the foot ring is no substitute for a footrest, and which of six fits.

handgetestet editorial team · Updated November 17, 2026
HALIFAX WORK counter chair in grayImage: buerostuhl24 Bürostühle und Büromöbel (Pressebild)
Contents12 sections

This guide was first published in German on handgetestet.de.

At a reception desk, lab bench or checkout, you sit higher than at a desk, and an ordinary office chair cannot get up there. A counter chair has an extended gas lift and a foot ring for this purpose. For most counters and hard floors, we would choose the HALIFAX WORK from hjh OFFICE: seat height up to 81 centimeters, synchronous mechanism, adjustable seat depth, 150 kilograms load capacity and casters that brake when unloaded. If it is only about height on a small budget, the WORK MF is enough.

Sitting high takes more than a long gas lift

In its Information 208-003 on standing checkout workstations, the German Social Accident Insurance (DGUV) describes quite precisely what a high work chair needs. It must swivel, have a seat height that matches the work surface, a padded seat and a backrest. On top of that comes a climbing aid, such as a ring or a step. As the relevant standard, the document refers to the German standard DIN 68877 for industrial work chairs.

One point is often overlooked when buying. At a combined sit-stand workstation, the DGUV additionally requires a separate footrest on which both feet can rest flat, adjustable from 14 to 46.5 centimeters. The foot ring on the chair is therefore mainly a climbing aid. For hours on the chair it is not enough; your feet then hang on a narrow bar. The DGUV also names a risk that hardly matters at a desk: you can fall when climbing onto a high chair. Braked casters and a sturdy ring are therefore no minor detail.

What seat height do I need?

Measure the height of the work surface, not that of the counter as seen from the front. The seat height depends on the surface where you write, scan or pipette. The distance between seat and work surface should match the one you have at your usual desk. A chair with a seat height of 54 to 71 centimeters fits a lab bench; for a counter with a high worktop you need more like 80 centimeters and up. The six models below cover exactly this range.

For orientation: for purely standing work at a checkout, the DGUV specifies a working height of 96 centimeters, with 95 to 106 tolerated. If you want to sit at a counter like that from time to time, your chair quickly ends up at the top of its adjustment range.

And then there is legroom, where many counters fall short. The front is closed at the bottom, a shelf is in the way, boxes are stored underneath. For standing checkout workstations with a standing aid, the DGUV requires legroom at least 79 centimeters wide, at least 28.5 centimeters deep at knee height and at least 57 centimeters deep at foot height, free of loose cables and not blocked. For a counter chair with a backrest, on which you pull in closer, that is more of a minimum. Measure it before you order a chair.

Six counter chairs compared

ModelSeat heightMechanismCasters according to hjhLoad capacity
hjh HALIFAX WORK60–81 cmSynchronous, seat depth, lumbar supportbraked, hard floors150 kg
hjh RESISTIO WORK54–71 cmSynchronous, seat depth and tilt, headrestbraked when seated, all floors120 kg
hjh TOP WORK 7858–79 cmSynchronous, seat depth, 4-way adjustable armrestsbraked, carpet120 kg
hjh ASPEN WORK W58–78 cmSynchronous, mesh backbraked, carpet120 kg
hjh VENDO WORK54–72 cmRocking mechanism, flip-up armrestsbraked, all floors110 kg
hjh WORK MF60–85 cmSeat tilt, small backrestbraked, carpet100 kg

hjh HALIFAX WORK

At 50 to 56 centimeters deep, the seat is strikingly long, which is why hjh also recommends it for taller people. The lumbar support locks in seven positions, and the armrests adjust in height, length and angle. The aluminum foot ring is height-adjustable. The supplied casters are intended for parquet, laminate and tile and brake depending on load. On carpet, you would need different casters.

hjh RESISTIO WORK

The most expensive and most adjustable chair in the selection: headrest adjustable in height, tilt and depth, 3D armrests, seat depth, seat tilt, synchronous mechanism with weight adjustment. The casters lock as soon as someone sits down and, according to hjh, are suitable for all floors. The limit is the height. It tops out at 71 centimeters, which is often not enough for high counters. At lab benches and raised desks, on the other hand, it is the most comfortable seat here. hjh specifies a body height of 160 to 210 centimeters, the backrest height adjusts in five steps, and the seat is 46 centimeters wide. At almost 25 kilograms, however, it is also the heaviest chair in the comparison. If you often push it back and forth between rooms, you will notice.

hjh TOP WORK 78

The classic checkout chair with a mesh cover, seat depth adjustment and armrests that adjust in four directions. Braked casters, but for carpet only.

hjh ASPEN WORK W

What sets it apart is the mesh covering on the backrest. According to hjh, small holes, such as those from a pencil, should close again when you rub them with your finger. In workshops and warehouses, where sharp things sit in trouser pockets, that is a practical argument. hjh gives a four-year warranty. The stainless steel foot ring measures about 54 centimeters. Here, too: casters for carpet.

hjh VENDO WORK

Instead of a synchronous mechanism, there is a rocking mechanism with adjustable tension. The lumbar support is height-adjustable, and the padded armrests flip up out of the way, which helps at tight counters. The braked casters suit all floors. With a load capacity of 110 kilograms and a seat height of up to 72 centimeters, it is more for labs and workbenches than for high counters.

hjh WORK MF

The simplest chair, but the highest: up to 85 centimeters. Contoured seat with adjustable tilt, a small height-adjustable backrest that leaves your arms free, chrome-plated steel base. It supports 100 kilograms. For short periods of sitting at a workbench or behind a high sales counter, that is enough. If you sit there all day, you should go for one of the models with a proper backrest.

How we would choose

  • Reception or medical practice with tile or parquet: HALIFAX WORK.
  • Lab and raised desk, many hours at a stretch: RESISTIO WORK.
  • Checkout or counter on carpet: TOP WORK 78.
  • Workshop with tools in your pocket: ASPEN WORK W.
  • Very high counters and short sitting times: WORK MF.

Plan for a footrest right from the start.

If you only sit occasionally and mostly stand, a standing aid (in German) will serve you better, and for the counter itself we have our guide to the reception counter (in German).

Black Friday: seat height before percentages

Office chairs also get discounted around Black Friday on November 27. A counter chair on sale only helps, though, if its seat height matches the work surface. The six models here range from 54 to 85 centimeters, and at the top end there are 14 centimeters between the RESISTIO WORK and the WORK MF alone. First measure working height and legroom as described above. Then check the casters in the offer, because there are different versions for carpet and hard floors.

If a retailer advertises a price reduction, it must state the lowest price of the previous 30 days (Section 11 of the German Price Indication Ordinance, Preisangabenverordnung). For our pick, the hjh HALIFAX WORK, you can set a price alert above. For the kitchen counter at home, bar stools are the more suitable choice. Deals from our partner retailers are collected on the Black Friday 2026 (in German) page.

Frequently asked questions

What seat height does a counter chair need?

It depends on the work surface, not on the counter as seen from the front. The distance between seat and surface should match the one at your usual desk. For a lab bench, 54 to 71 centimeters fits; for a counter with a high worktop, more like 80 centimeters and up.

Is the foot ring on a counter chair enough as a footrest?

Not for hours on the chair. The ring is mainly a climbing aid; otherwise your feet hang on a narrow bar. At a combined sit-stand workstation, the German Social Accident Insurance (DGUV) requires a separate footrest on which both feet rest flat, adjustable from 14 to 46.5 centimeters.

How much legroom do you need under a counter?

For standing checkout workstations with a standing aid, the DGUV requires at least 79 centimeters of width, 28.5 centimeters of depth at knee height and 57 centimeters at foot height, free of cables and not blocked. For a counter chair with a backrest, that is more of a minimum. Many counters fail because of a closed front or shelves.

What casters does a high work chair need?

Braked ones, matched to the floor. You can fall when climbing onto a high chair, which is why brakes are no minor detail. The HALIFAX WORK has casters for hard floors, the TOP WORK 78 and ASPEN WORK W for carpet. According to hjh, the RESISTIO WORK and VENDO WORK are suitable for all floors.

Which counter chair is suitable for very high counters?

The hjh WORK MF goes up to 85 centimeters, the highest in the comparison. It has a contoured seat and only a small backrest, and it supports 100 kilograms. That is enough for short periods of sitting. If you sit there all day, you are better off with the HALIFAX WORK, which has a proper backrest and goes up to 81 centimeters.

Who is the RESISTIO WORK intended for?

For labs and raised desks with many hours at a stretch. It has a headrest, 3D armrests, seat depth and seat tilt adjustment, and hjh specifies a body height of 160 to 210 centimeters. It tops out at a seat height of 71 centimeters, though, which is often not enough for high counters. At almost 25 kilograms, it is the heaviest.

How much load capacity do counter chairs have?

According to hjh, the six models here support between 100 and 150 kilograms. The HALIFAX WORK has the highest rating at 150 kg, the WORK MF the lowest at 100 kg. The RESISTIO WORK, TOP WORK 78 and ASPEN WORK W are rated at 120 kg, the VENDO WORK at 110 kg.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent.