Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Buying a Garden Gate 2026: Single or Double, Metal or Wood

Buying a garden gate in 2026: single or double gate, steel, aluminum or wood, plus lock, post foundation and permits. Six gates compared.

handgetestet editorial team · Updated November 17, 2026
Contents14 sections

This guide was first published in German on handgetestet.de.

A garden gate rarely fails because of the gate itself. It fails because of two holes in the ground that end up a few centimeters too far apart or too close together. If you have a twin-wire mesh fence, the safest bet is a complete set of gate leaf, posts and lock, and that is exactly what the Alberts Flexo Einzeltor (single gate) is. Wood suits picket and slatted fences, but it takes more work, both before installation and afterward.

One leaf or two?

That depends on what needs to get through. For people, bicycles and the garbage can, a single gate is enough. It pays to take a second look at the data sheet, though: according to Alberts, the Flexo single gate with a nominal width of 1,000 mm has a frame of 910 mm and a clear passage of 886 mm. A good eleven centimeters disappear into the frame, hinges and gate stop.

You need two leaves if you want to drive a vehicle onto the property. For the Flexo double gate with a nominal width of 2 m, the manufacturer specifies a 1,854 mm clear passage. For a proper driveway, we would rather plan for 3 m. A double gate also brings hardware that a single gate does not have. A drop bolt holds the fixed leaf in place, and a gate stop catches the leaf when it closes. Alberts includes both. If you want to add a motor later, read our guide to driveway gate openers first.

Steel, aluminum or wood?

The Flexo gates from Alberts are hot-dip galvanized and, on request, additionally plastic-coated in green (RAL 6005), anthracite (RAL 7016) or matte black (RAL 9005). The Wellengitter (crimped wire mesh) gates come zinc-phosphated or galvanized, usually with a coating. Alberts gives a 15-year warranty for the Flexo gates and 10 years on corrosion resistance for the Wellengitter gates; the terms are listed with each item.

Aluminum does not rust, which Alberts explicitly advertises for the Chaussee, and it is light. According to the manufacturer, this gate weighs 5.4 kg, while the Flexo set at 80 cm height weighs a good 20 kg. Wood looks the warmest. But it swells and shrinks, turns gray without a finish and needs maintenance; how to go about that properly is explained in our guide to wood stain.

There is one thing no mesh gate can do. It does not block the view. If you want both, plan the gate and the privacy screen together; our privacy screen guide (in German) offers ideas.

Which lock belongs on a garden gate?

Metal gates usually have a tube frame lock with a profile cylinder; the heavier Flexo Plus has a mortise lock. Alberts supplies the locks so they can be used for DIN left and DIN right (the German standard for opening direction). So you do not have to commit to the opening direction when you buy. Custom-made gates are a different story: Osmo, for example, has you tick the hinge side of its Alu-Fence single gates on the order form. If a key gets lost, only the profile cylinder is replaced; Alberts also sells it separately. If all you need is a latch without a key, a wooden kit with a simple latch already has you covered.

How deep do the posts need to go into the ground?

Deeper than you think. In its installation instructions for gates with an aluminum frame, Osmo specifies a hole of at least 30 × 30 × 80 cm per post, at least 50 × 50 × 80 cm for double gates, and more depending on the soil and wind load. The hole is filled with cement and gravel at a ratio of 1:3. Installation only starts once the concrete has cured. According to Osmo, the hinge post should never be set freestanding but should also be braced by the adjoining fence or a storm anchor bracket.

A look at the post length confirms this. The Flexo gate at 80 cm height comes with 130 cm posts, so half a meter sits in the foundation. BooGardi calculates similarly for its wooden gates: 50 cm in the ground, plus the gate height and 5 cm of clearance above the ground. And one more tip from the Osmo instructions that saves trouble. Measure the delivered gate first, then set the posts, and check the spacing at the top and bottom while the concrete is still soft.

Do I need a permit?

In Germany, each federal state regulates this itself. In Bavaria, enclosures up to 2 m high are exempt from the permit procedure under Art. 57 of the Bavarian Building Code, except in undeveloped outlying areas. Exempt from the procedure does not mean exempt from the rules, though: Art. 55 makes clear that all other public-law regulations still apply, such as a local development plan. For other states and for gates right on the property line, check with your municipality’s building authority beforehand.

Six garden gates compared

ModelDesign and materialDimensions according to the manufacturerPosts and lockBest for
Alberts Flexo EinzeltorHot-dip galvanized steel, optionally coated, twin-wire mesh1.00 to 2.00 m wide, 0.80 to 2.00 m hightwo 60 × 60 mm posts, tube frame lock with cylinderTwin-wire mesh fence, pedestrian access
Alberts Flexo Plus EinzeltorHot-dip galvanized steel, 60 × 40 mm framefrom 1.00 m wide, opens up to 180°80 × 80 mm posts (1 m gate), mortise lockHeavily used entrances, heavy mesh panels
Alberts Flexo DoppeltorHot-dip galvanized steel, twin-wire meshfrom 2.00 m wide, up to 2.50 m per leafPosts, lock, drop bolt, gate stopDriveway for vehicles
Alberts Wellengitter-EinzeltorSteel, 42 mm round tube, crimped wire mesh1.00 to 1.50 m wide, 0.75 to 2.00 m high60 mm round posts, tube frame lock with two keysChain-link and crimped wire mesh fences
Alberts Chaussee EinzeltorAluminum, plastic-coated, decorative bars1.00 m wide, 1.00 or 1.20 m highPosts sold separately, lock with cylinderFront yard with decorative fence
BooGardi Gartentor Bausatz HaselnussSolid hazel wood, untreated, pickets0.80 to 1.50 m, double-leaf up to 3.00 mNo posts, pintles, strap hinges, latchNatural garden, picket and slatted fences

Alberts Flexo Einzeltor

Our recommendation for twin-wire mesh fences. The delivery includes one leaf and two combination posts, which are converted on site into the hinge post and the latch post, plus lock, aluminum handle, profile cylinder and brackets for connecting the mesh panels. The range covers widths from 1 to 2 m and heights from 80 cm to 2 m. The gate opens 90°, no more.

Alberts Flexo Plus Einzeltor

The heavy-duty version. A 60 × 40 mm frame, 80 × 80 mm posts on the 1 m gate, Locinox hinges, a mortise lock and a gate holder according to DIN. The leaf swings open up to 180°. According to the manufacturer, the connection to the fence is ordered separately.

Alberts Flexo Doppeltor

Two combination leaves that can be converted on site into the active and the fixed leaf; with unevenly divided gates, this lets you swap sides right at the installation site. Drop bolt and gate stop are included. Up to 2.50 m per leaf is possible.

Alberts Wellengitter-Einzeltor

Round tube frame, crimped wire mesh with a 50 × 50 mm mesh, round 60 mm posts. The gate is designed for chain-link and Fix-Clip-Pro fences and comes with a replaceable tube frame lock, two keys, a handle and adjustable pintles. Above 1.50 m height, the hinges are welded on, which makes the gate slightly wider. The same design is available as a double gate from 3 m.

Alberts Chaussee Einzeltor

A decorative gate made entirely of aluminum, matching the Chaussee fence panels, with reinforcements in all four corners. Lock, cylinder, pintles, drop bolt and gate stop are included; the posts are not. Alberts states the clear width as 965 mm.

BooGardi Gartentor Bausatz Haselnuss

A kit made of split, peeled hazel rods with rounded tips. Cross and diagonal braces, screws, two pintles, two strap hinges and a latch are included. The screws for the pintles and the latch are deliberately left out, because wooden, metal and concrete posts each need different ones. That is honest, but for you it means one more trip to the hardware store.

How we would decide

  • Twin-wire mesh fence and access on foot: Alberts Flexo Einzeltor in the color of the fence.
  • A gate that opens and closes many times a day, or mesh panels with 8/6/8 mm wires: Flexo Plus.
  • A car, trailer or construction machine needs to get in: Flexo Doppeltor, ideally 3 m rather than 2 m.
  • Old chain-link fence: Wellengitter-Einzeltor instead of rebuilding the whole fence.
  • Decorative fence in the front yard: Chaussee, and order the posts at the same time.
  • Natural garden with a picket fence: BooGardi, with wooden posts and your own set of screws.

Frequently asked questions

Is a single gate enough, or do I need two leaves?

A single gate is enough for people, bicycles and the garbage can. The width shrinks, though: according to Alberts, the Flexo single gate with a nominal width of 1,000 mm has a clear passage of only 886 mm. You need two leaves if you want to drive a vehicle onto the property; for a proper driveway, this guide plans for 3 m instead.

How deep do garden gate posts need to go into the ground?

Osmo specifies a hole of at least 30 × 30 × 80 cm per post, 50 × 50 × 80 cm for double gates, filled with cement and gravel at a ratio of 1:3. The Flexo gate at 80 cm height comes with 130 cm posts, so half a meter sits in the foundation.

What is the difference between steel, aluminum and wood for a garden gate?

The Flexo gates are made of hot-dip galvanized steel, optionally coated, and Alberts gives a 15-year warranty. Aluminum does not rust and is light; according to the manufacturer, the Chaussee weighs 5.4 kg. Wood looks warmest but warps and shrinks, turns gray without a finish and needs maintenance.

Which lock belongs on a garden gate?

Metal gates usually have a tube frame lock with a profile cylinder; the heavier Flexo Plus has a mortise lock. Alberts supplies the locks so they can be used for DIN left and DIN right. If a key gets lost, only the profile cylinder is replaced. For wooden gates, a simple latch is often enough.

Does a garden gate need a permit?

In Germany, each federal state regulates this itself. In Bavaria, enclosures up to 2 m high are exempt from the permit procedure under Art. 57 of the Bavarian Building Code, except in undeveloped outlying areas. A local development plan still applies. For other states and for gates right on the property line, check with the building authority beforehand.

Which gate fits an old chain-link fence?

The Alberts Wellengitter-Einzeltor with a round tube frame and round 60 mm posts. It is designed for chain-link and Fix-Clip-Pro fences and comes with a tube frame lock and two keys. That way, you avoid rebuilding the entire fence.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.