Contents11 sections
This guide was first published in German on handgetestet.de.
Twelve pairs of pliers for very little money, and after the third piece of steel wire the cutting edge chips. When it comes to pliers, the bargain-bin set is the classic mistake. A normal household gets by with three to four good pliers: combination pliers, diagonal cutters, water pump pliers and a pair of needle-nose or snipe-nose pliers.
If you only tinker in the workshop, choose a set with Cobra-style water pump pliers. If you strip wires and connect lamps, you need a VDE set with 1,000-volt insulation. The table shows which set belongs where.
Six pliers sets compared
| Set | Contents according to the manufacturer | VDE 1,000 V | Best for |
|---|---|---|---|
| Knipex 00 20 09 V01 | Combination pliers 180 mm, Cobra 250 mm, diagonal cutters 160 mm | no | Workshop, household, plumbing |
| Knipex 00 20 15 Compact box | Combination pliers, diagonal cutters, snipe-nose pliers, wire stripper | yes | Electricians, serious DIY |
| Wiha Professional electric 26852 | Combination pliers 180 mm, diagonal cutters 160 mm, snipe-nose pliers 200 mm | yes, individually tested | Electrical work with a focus on ergonomics |
| Gedore 1102-002 VDE | Heavy-duty combination pliers 180 mm, diagonal cutters 160 mm, snipe-nose pliers 160 mm, L-BOXX Mini | yes | Installation work, L-BOXX users |
| Stahlwille TCS 3 821/4 | Water pump pliers 240 mm, combination pliers 180 mm, heavy-duty diagonal cutters 180 mm, telephone pliers 200 mm | not specified for the set | Tool trolleys, automotive |
| Amazon Basics 4-piece | four pliers, including diagonal cutters and needle-nose pliers | no | occasional jobs |
Steel, hardness, joint: how to read quality
From the outside, almost all pliers look the same. The difference lies in the steel, the hardening and the joint. Major manufacturers state specific values for this; cheap sets usually do not. That alone says a lot.
Wiha, for example, states C 70 tool steel for the combination pliers in its Professional electric range and cutting edges induction-hardened to around 64 HRC. For Gedore’s VDE diagonal cutters 8314-160 H, the data sheet lists a cutting edge hardness of 63 to 65 HRC. If such information is missing entirely, you should not expect much with hard wire. Reputable manufacturers also state how thick soft, medium-hard and hard wire may be. Not every pair of diagonal cutters can handle piano wire or spring steel, far from it.
Then there is the joint. If it is worn, the cutting edges slip past each other. Box joints or riveted joints with clean guidance last longer.
In terms of size, 180 mm for combination pliers and 160 mm for diagonal cutters is the norm; 250 mm water pump pliers cover most sink traps and threaded connections. Many sets lack a wire stripper. If you regularly prepare cables, look for one specifically or buy it separately.
Understanding VDE and 1,000 volts correctly
Insulated pliers according to DIN EN/IEC 60900 are approved for work close to live parts up to 1,000 V AC. Bahco states that it tests every single tool at 10,000 V at the end of production; Wiha speaks of individual testing according to IEC 60900. A thick rubber coating on cheap pliers is not insulation within the meaning of the standard. What matters is the double triangle symbol with „1000 V“ and the reference to the standard.
Pliers like these do not make anyone a qualified electrician.
Under Section 13 of the German Low Voltage Connection Ordinance (Niederspannungsanschlussverordnung, NAV), work on the household installation behind the main service fuse may only be carried out by the grid operator or a registered installation company. In a business setting, DGUV Regulation 3 of the German Social Accident Insurance applies: electrical installations may only be set up, modified and maintained by qualified electricians or by persons under their direction and supervision. Work on the mains supply therefore remains reserved for professionals. For everyone else, VDE pliers serve as an additional backup, for example when shortening and stripping cables on devices that are disconnected from the mains.
Knipex 00 20 09 V01: the workshop trio
Combination pliers 03 02 180, diagonal cutters 70 02 160 and the Cobra 87 01 250. According to Knipex, the Cobra is forged from chrome vanadium electric steel, oil-hardened in several stages and brought to about 61 HRC at the teeth. Sink traps, heating pipe fittings, rusted-on nuts: that is exactly what many people end up looking for this combination for. Electrical work, on the other hand, no. Nothing here is insulated.
Knipex 00 20 15: VDE with wire stripper
The red Compact box holds the VDE combination pliers 03 06 180, the diagonal cutters 70 06 160, the snipe-nose pliers 26 16 200 and the wire stripper 11 06 160. Knipex states around 60 HRC for the cutting edges of the combination pliers and testing according to DIN EN/IEC 60900. No other set in the comparison includes a wire stripper. Without it and without a case, the same three pliers are available in the electrician’s pack 00 20 12.
Wiha 26852: easy cutting
Wiha’s combination pliers and diagonal cutters have the DynamicJoint, which according to the manufacturer reduces the force needed for cutting. Every pair of pliers is individually tested according to IEC 60900. A case is not included, which comes up fairly often in reviews. Hands that cut all day long get a well-thought-out package here.
Gedore 1102-002 VDE: case included
Three VDE pliers in an L-BOXX Mini, insulated up to 1,000 V according to EN/IEC 60900 as per the listing. Gedore makes the diagonal cutters from heat-treated steel, induction-hardened, with 63 to 65 HRC at the cutting edge. Handy if you already work with the L-BOXX system. There are no water pump pliers.
Stahlwille TCS 3 821/4: for the drawer
Four pliers in a foam insert from the Tool Control System, made to fit tool trolleys. Two-color foam shows immediately whether a pair is missing. For the combination pliers in the VDE version, Stahlwille states heat-treated tool steel and around 64 HRC at the cutting edges. Without a tool trolley, though, the format makes little sense.
Amazon Basics: cheap, with limits
Four pliers in the lowest price range. The seller gives no information online on steel, hardness or cutting values, and there is no VDE insulation. Reviews describe the set as usable for simple tasks but not particularly ergonomic. As a second set in the car or a vacation home, it is enough. In the workshop, you are likely to end up buying twice.
Bahco also offers VDE pliers, for example the insulated ERGO set 9897S/3 with combination pliers, diagonal cutters and needle-nose pliers. We could not find a reliable current offer for it on Amazon.de, which is why it is missing from the table.
How we would decide
Household and workshop without electrical work? Knipex 00 20 09 V01; the water pump pliers make the difference here. If you prepare cables and leave the electrics to professionals, the Knipex 00 20 15 serves you well, because the wire stripper is already in the box. If you do a lot of cutting every day, the smooth-running joint speaks for the Wiha 26852.
L-BOXX on the shelf: Gedore 1102-002 VDE. Tool trolley with foam inserts: Stahlwille TCS 3 821/4. And if you only need pliers occasionally, Amazon Basics will do, as long as it is clear that hard wire is not its thing.
If you are just setting up a workshop, settle on a battery platform before buying the next device. How to do that is explained in the article on battery systems; the right drill is sorted out in the cordless drill guide.
Frequently asked questions
Which pliers does a normal household need?
Three to four good pliers are enough: combination pliers, diagonal cutters, water pump pliers and a pair of needle-nose or snipe-nose pliers. The usual sizes are 180 mm for combination pliers and 160 mm for diagonal cutters, and 250 mm water pump pliers cover most sink traps and threaded connections.
How do you recognize good pliers?
By the steel, the hardening and the joint. Major manufacturers state specific values, Wiha for example around 64 HRC at the cutting edges and Gedore 63 to 65 HRC. If such information is missing entirely, you should not expect much with hard wire. A worn joint lets the cutting edges slip past each other.
What do VDE and 1,000 volts mean for pliers?
Insulated pliers according to DIN EN/IEC 60900 are approved for work close to live parts up to 1,000 V AC. What matters is the double triangle symbol with "1000 V" and the reference to the standard. A thick rubber coating on cheap pliers is not insulation within the meaning of the standard.
Can I work on the electrics myself with VDE pliers?
No, the pliers do not make anyone a qualified electrician. Under Section 13 of the German Low Voltage Connection Ordinance (NAV), work behind the main service fuse may only be carried out by the grid operator or a registered installation company. For everyone else, the VDE pliers serve as a backup, for example when stripping wires on devices that are disconnected from the mains.
Which pliers set includes a wire stripper?
In the comparison, only the Knipex 00 20 15 in the red Compact box comes with a wire stripper, plus VDE combination pliers, diagonal cutters and snipe-nose pliers. Without the wire stripper and without a case, the same three pliers are available in the electrician's pack 00 20 12.
Is a cheap pliers set like Amazon Basics good enough?
For occasional jobs, as a second set in the car or a vacation home, it is enough. The seller gives no information on steel, hardness or cutting values, and there is no VDE insulation. Hard wire is not its thing; in the workshop, you are likely to end up buying twice.
Sources
- Knipex: Cobra 87 01 250
- Knipex: combination pliers 03 06 180
- Knipex: electrician’s pack 00 20 12
- Wiha: pliers set Professional electric 26852
- Wiha: combination pliers Professional electric
- Gedore: VDE diagonal cutters 8314-160 H
- Stahlwille: pliers set TCS 3 821/4
- Stahlwille: VDE combination pliers 6700
- Bahco: ERGO insulated pliers set 9897S/3
- German Low Voltage Connection Ordinance (NAV), Section 13
- DGUV Regulation 3: electrical installations and equipment
Where to buy
- Knipex 00 20 09 V01Check price at Amazon.deAvailable in Germany: Amazon.de
- Knipex 00 20 15 Compact-BoxCheck price at Amazon.deAvailable in Germany: Amazon.de
- Wiha Professional electric 26852Check price at Amazon.deAvailable in Germany: Amazon.de
- Gedore 1102-002 VDECheck price at Amazon.deAvailable in Germany: Amazon.de
- Stahlwille TCS 3 821/4Check price at Amazon.deAvailable in Germany: Amazon.de
- Amazon Basics 4-teiligCheck price at Amazon.deAvailable in Germany: Amazon.de
