Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet
This page in 9 more languages

DeutschNederlandsFrançaisItalianoEspañolPolskiУкраїнськаTürkçeالعربية

Buying a Resin 3D Printer 2026: Build Volume, Resolution, Safety

Buying a resin 3D printer in 2026: what MSLA, pixel size, build volume and resin heating actually do, how to wash and dispose of resin safely, and six current models.

handgetestet editorial team · Updated November 17, 2026
Contents13 sections

This guide was first published in German on handgetestet.de.

If you choose a resin printer by the K number on the box, you are looking at the wrong figure. Whether the first few weeks are fun depends more on room temperature, the mechanics of the resin vat and the question of where the alcohol wash bath will eventually go. Our recommendation for ambitious beginners is the Elegoo Saturn 4 Ultra 16K: according to the manufacturer, it preheats the resin to 30 °C and has 22 cm of build height. If you only want to print miniatures and spend little, the Anycubic Photon Mono 4 will do.

How a print emerges from the resin vat

All the machines in this guide use the MSLA process. Beneath a shallow vat of liquid synthetic resin sits an array of UV LEDs with a wavelength of 405 nanometers, and above it a black-and-white LCD. The display acts as a mask. It lets light through only where the current layer is meant to form, curing an entire layer at once. The build plate then lifts a little, peels the part off the release film at the bottom of the vat and dips back in. The object grows upside down.

This leads to a quirk that surprises many people. Whether there is one figure on the plate or twelve makes hardly any difference to the print time, because each layer is exposed in one go. Speed is counted in millimeters per hour, in other words in height. Figures such as 150 or 170 mm/h are maximums. Anycubic states 130 mm/h for the M7 Pro with standard resin and 170 mm/h only with its own fast resin, and Elegoo itself writes that layer thickness, exposure and wait times determine the actual speed.

16K sounds like more than it is

The K number only describes how many pixels the display has. Spread across 10 inches, 16K produces different pixels than 8K on 7 inches. The pixel size in micrometers says more: according to the manual, the Saturn 4 Ultra 16K comes in at 14 × 19 µm, the smaller Mars 5 Ultra at 18 × 18 µm, and the Phrozen Sonic Mini 8K S at 22 µm. For comparison, Formlabs states a pixel size of 50 µm for its Form 4. So sharpness does not depend on pixel count alone, but also on optics, resin, exposure and support structures. We would not see a reason to buy in the difference between 14 and 18 µm, but we would in the difference between a 7- and a 10-inch display.

That is because the build volume limits what is possible in the first place. The small machines offer a print area of around 15 × 8 cm and 16.5 to 17 cm of height. A 20 cm standing bust will not fit there, but it will on a Saturn 4 Ultra 16K with 22 cm of build height. Large vats hold more resin and weigh more: Elegoo states 16.1 kg for the Saturn, Phrozen 18 kg for the Sonic Mighty Revo. A machine like that does not belong on a wobbly shelf.

Cold is the underestimated enemy

Cold resin flows less well, and vat heating is meant to compensate for exactly that. In its help pages, Elegoo describes a case at around 10 °C room temperature in which the print failed without vat heating, and its manual recommends an environment of 25 to 30 °C. Heating up to 30 °C takes about half an hour on that machine. Anycubic keeps the resin in the Photon Mono M7 Pro at 25 °C. In a heated study, this is a convenience feature. In a garage or basement in January, it decides between success and scrap.

The second factor is the release film. It wears out. Elegoo counts the peel cycles and prompts a replacement at around 60,000; Anycubic states 45,000 layers in the fast print profiles for the ACF film of the M7 Pro. Plan for spare films right from the start.

Washing, curing, disposal: the part after printing

Liquid printing resin is a hazardous substance. The safety data sheet for Formlabs Grey Resin lists three hazard statements: it may cause an allergic skin reaction, it causes serious eye irritation, and it is toxic to aquatic life with long-lasting effects. The data sheet calls for protective gloves, protective clothing and eye protection. Elegoo includes gloves and a mask with the Saturn and Mars, and Anycubic’s quick start guide calls for gloves, a mask and a well-ventilated place protected from light. Other resins have their own data sheets. Read the one for your bottle before you open it.

After printing, the part is sticky. Elegoo specifies ethanol or isopropanol of at least 95 percent unless you use a water-washable resin. Isopropanol is flammable, so Formlabs advises closed containers away from ignition sources, nitrile or neoprene gloves and good ventilation. The bath wears out: according to Formlabs, it should be replaced at 10 to 12 percent dissolved resin. A wash and cure station saves trips here. Combination units such as the Elegoo Mercury Plus 3.0 rinse the part in a container of water or alcohol and then post-cure it on a turntable under 405 nm light. The unit does not replace the alcohol.

That leaves the waste. Formlabs is clear on this: no liquid resin and no alcohol containing dissolved resin down the drain or in household waste. Small resin leftovers and smeared paper towels are left to cure in sunlight; cured resin and finished parts may go in the general waste. For the used wash bath, the manufacturer refers to the safety data sheet and local authorities. So ask your local waste authority where hazardous waste collection accepts this kind of thing.

And the fumes? For small desktop machines, the Institute for Occupational Safety and Health of the DGUV (German Social Accident Insurance) recommends the same measures as for conventional printers, such as a separate room with adequate ventilation. That rules out bedrooms and children’s rooms. Incidentally, if you want to cast rather than print, you need entirely different material: printers work with light-curing resin for 405 nm, while casting resin cures with a hardener. There is more on that in our guide to epoxy resin (in German). If you mainly need holders, enclosures or spare parts, you are usually better served by a filament machine from our guide to 3D printers.

Six resin printers compared

ModelPixel size (XY)Build volume (W × D × H)Resin heatingBest for
Elegoo Saturn 4 Ultra 16K14 × 19 µm211.7 × 118.4 × 220 mmyes, 30 °CFigures, busts, cool rooms
Anycubic Photon Mono M7 Pro16.8 × 24.8 µm223.6 × 126.5 × 230 mmyes, 25 °Clots of resin, automatic refilling
Phrozen Sonic Mighty Revo16.8 × 24.8 µm223 × 126 × 235 mmyesWorkshop with heavy use
Elegoo Mars 5 Ultra18 × 18 µm153.4 × 77.8 × 165 mmnot built in, port for an add-on heaterMiniatures in a warm room
Phrozen Sonic Mini 8K S22 µm165 × 72 × 170 mmnone statedsimple start without Wi-Fi
Anycubic Photon Mono 417 × 17 µm143 × 89 × 165 mmnone statedfirst attempts, miniatures

Elegoo Saturn 4 Ultra 16K

The Saturn combines a 16K display (15,120 × 6,230 pixels) with vat heating that brings the resin to 30 °C and, if desired, keeps it warm for up to 24 hours. A camera monitors the print, and files arrive via Wi-Fi or USB. At 16.1 kg and 55 cm tall, it needs a permanent spot. For figures and busts, it is in our view the most coherent compromise between build height, detail and ease of use.

Anycubic Photon Mono M7 Pro

On the M7 Pro, a refill unit pumps resin from the bottle into the vat and back again after printing. According to Anycubic, it reaches 130 mm/h with standard resin and 170 mm/h with the company’s own fast resin. The build volume is slightly larger than the Saturn’s, but the pixels are coarser. A sensible choice for anyone who changes resin often and dislikes handling open bottles.

Phrozen Sonic Mighty Revo

Phrozen lists foreign-object detection that stops the print when residue of 4 mm or larger is in the vat, a built-in air purifier, two linear rails with a ball screw, and vat heating. For hobbyists with occasional projects, that is more machine than necessary. If you produce small batches every day, you get a lot of protection against failed prints in return.

Elegoo Mars 5 Ultra

The Saturn’s little brother brings a 9K display with 8,520 × 4,320 pixels, a camera, Wi-Fi and a tilting vat for peeling off the layers. There is no heater; instead, Elegoo provides a port for an add-on heater. At 8.8 kg with a 15 × 8 cm print area, it fits nicely on a desk in a heated room.

Phrozen Sonic Mini 8K S

A printer without extras. Phrozen states 22 µm, up to 80 mm/h and USB as the only connection. So files travel to the machine on a stick. If you do not want a printer account or an app, you will not see that as a drawback.

Anycubic Photon Mono 4

The simplest way into resin printing on this list. The 7-inch display has a resolution of 9,024 × 5,120 pixels, which works out to 17 µm. According to Anycubic, it has no Wi-Fi but resumes after a power outage. That is enough for miniatures; if you already suspect busts will follow, you are better off buying one size up right away.

How we would decide

  • Figures, busts and a workspace that gets cool in winter: Elegoo Saturn 4 Ultra 16K.
  • Many types of resin in rotation and as little contact with open bottles as possible: Anycubic Photon Mono M7 Pro.
  • Daily small batches in the workshop: Phrozen Sonic Mighty Revo.
  • Miniatures only, a warm room, little space: Elegoo Mars 5 Ultra, or for the smallest use case the Anycubic Photon Mono 4.
  • No Wi-Fi wanted: Phrozen Sonic Mini 8K S.

In any case, factor in gloves, safety glasses, alcohol, spare films and a spot with a window. Without those, even the most expensive printer is only half bought.

What each color change costs in filament and time is worked out in the guide to multicolor 3D printing (in German).

Frequently asked questions

Is 16K really sharper on a resin printer?

Not automatically. The K number only describes the pixel count of the display; the pixel size in micrometers says more. The Saturn 4 Ultra 16K comes in at 14 × 19 µm, the Mars 5 Ultra at 18 × 18 µm. Sharpness also depends on optics, resin and exposure. The display diagonal matters more than the difference between 14 and 18 µm.

Why does a resin printer need resin heating?

Cold resin flows less well. Elegoo describes a case at around 10 °C room temperature in which the print failed without vat heating, and recommends an environment of 25 to 30 °C. In a heated study, the heater is a convenience; in a garage or basement in January, it decides between success and scrap.

How large does the build volume need to be?

That depends on your plans. The small machines offer a print area of around 15 × 8 cm and 16.5 to 17 cm of height, enough for miniatures. A 20 cm standing bust will not fit there, but it will on a Saturn 4 Ultra 16K with 22 cm of build height. Large machines do weigh considerably more, though.

Is printing resin dangerous?

Liquid printing resin is a hazardous substance. The safety data sheet for Formlabs Grey Resin lists allergic skin reactions, serious eye irritation and toxicity to aquatic life, and calls for protective gloves, protective clothing and eye protection. The IFA of the DGUV (German Social Accident Insurance) recommends a separate room with adequate ventilation, which rules out bedrooms and children's rooms.

What do you clean resin prints with?

Elegoo specifies ethanol or isopropanol of at least 95 percent unless you use a water-washable resin. Isopropanol is flammable; Formlabs advises closed containers away from ignition sources, nitrile gloves and good ventilation. A wash and cure station saves trips but does not replace the alcohol.

How do you dispose of leftover resin and washing alcohol?

According to Formlabs, liquid resin and alcohol containing dissolved resin belong neither down the drain nor in household waste. Small leftovers and smeared paper towels are left to cure in sunlight; cured resin may go in the general waste. For the used wash bath, ask your local waste authority about hazardous waste collection.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.