Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Buying a Robot Mower Garage 2026: Wood, Metal, Plastic

Buying a robot mower garage: which material, which interior height, and why shade matters for the battery. Six garages from Gardena, Husqvarna, Worx and more.

handgetestet editorial team · Updated November 17, 2026
Contents11 sections

This guide was first published in German on handgetestet.de.

People rarely buy a robot mower garage because of the rain. The machines are built for outdoor use. The real enemy is the sun on the charging station, and that is exactly what a roof helps against. Our recommendation is therefore: first check the garage from your own mower’s manufacturer, because it is tailored to the charging station. Universal garages made of wood or steel fit once you have measured the interior height and the entrance.

Why a roof over the charging station does more than you might think

Husqvarna specifies clear limits for its Automower models. Charging works between 0 and 45 °C, operation and storage between 0 and 50 °C. This is measured inside the housing, not at the weather station. If the charging station sits on a south side without shade in July, this limit is reached faster than you would think. If the battery temperature message appears frequently while charging, Husqvarna recommends a shadier spot and names its own garage as the solution against the long-term effects of sun and rain.

So a garage does not replace a good location. It improves a mediocre one.

In winter, even the sturdiest roof does not help. Husqvarna recommends storing the mower dry in a heated room at around 10 to 15 °C, charging the battery to at least 50 percent beforehand and also storing the charging station dry over the winter. So if you are hoping a garage will let the robot stay outside until March, you are buying with the wrong expectations.

Wood, metal or plastic: what really counts

The material is a matter of taste; the dimensions are not. Measure your mower before you compare pictures. According to the manufacturer, a Worx Landroid Vision L1300 is 63.8 cm long, 48.7 cm wide and 26.5 cm tall. A wooden garage with 35 cm of interior height therefore leaves it a good 8 cm of clearance. Sounds like a lot. On a slightly sloping lawn or with a high cutting height setting, however, that shrinks.

  • Plastic usually comes from the mower manufacturer itself. The garage sits directly on the charging station, the roof flips up, and the display and buttons stay accessible.
  • Galvanized steel stands freely over the mower and station. It needs level ground and anchoring; otherwise it will wander off in the next storm.
  • Wood blends visually into the garden but needs care. According to the manufacturers, glazed softwood garages have to be repainted regularly.

With freestanding models, also pay attention to where the entrance is. The robot approaches the station in a fixed pattern, often via a guide wire or by camera. A garage that stands centered but covers the charging station from the side turns every docking into a gamble. How differently mowers navigate without a boundary wire is explained in our guide to robot mowers without a boundary wire (in German).

Six garages and their key specs

ModelMaterial and designDimensions according to the manufacturerBest for
Gardena Garage 15025-20Flip-up cover, tool-free on the charging station, 2.9 kgnot specifiedsmart SILENO pro, max, sense, free
Gardena Garage 15020-20Plastic, flip-up roof, screwed on over the charging stationnot specifiedSILENO minimo, city, life
Husqvarna Automower Garage NERA (536 66 41-01)Flip-up roof, matched to the charging station95.4 × 74 × 51 cmNERA models except the 435X AWD
Worx WA0821over the station or screwed into the groundnot specifiedLandroid Vision
Juskys Mähroboter-Garage Satteldachgalvanized steel, freestanding, 4 ground stakes98 × 89 × 63 cm, footprint 85 × 75 cmMowers without their own manufacturer garage
dobar Mährobotergarage mit PflanzkastenSoftwood, glazed, plantable roof, 11.3 kgoutside 79 × 73 × 56 cm, inside approx. 75 × 65.5 × 35 cmlow mowers up to about 30 cm tall

Gardena garage for smart SILENO pro, max, sense and free

The 15025-20 is placed on the charging station of the current smart SILENO series without tools. Gardena cites protection from sun, wind, rain and hail, and falling leaves and branches are not supposed to harm the mower either. The cover flips up, with the control panel underneath. Gardena does not publish interior dimensions, and they are not needed here anyway.

Gardena garage for SILENO minimo, city and life

For the older and smaller SILENO models, there is the plastic 15020-20. It is screwed on over the charging station, and six screws are included. The roof can be flipped open, and according to Gardena, the cable routing at the back remains easily accessible. It does not fit the new smart models.

Husqvarna Automower Garage for NERA

Husqvarna makes the garage in several versions that are strictly tied to model series. For the NERA series, it measures 95.4 × 74 × 51 cm; the 435X AWD needs its own version. Older mowers such as the 305, 310 or 415X have yet another one, which at 66 cm is considerably taller. Order by model number, not by photo. The flip-up roof gives access to the display and keypad while charging.

Worx WA0821 for the Landroid Vision

Worx lists the WA0821 as an all-weather roof against rain, snow and strong sun for the Vision mowers. It can be mounted over the charging station or screwed directly into the ground for more stability. Worx does not state the material or dimensions on the product page. If you run a Landroid without Vision, you need a different model.

Juskys Mähroboter-Garage with gable roof

A freestanding cover (Mähroboter-Garage, robot mower garage) made of galvanized steel in anthracite. With a footprint of 85 × 75 cm and a ridge height of 63 cm, it houses the mower and station, and there is an opening at the back for the power cable. Juskys requires level, load-bearing ground such as concrete slabs or paving and includes four 15 cm ground stakes. The manufacturer does not name specific mower models, so measure for yourself beforehand. For mowers from Blumfeldt or other brands without their own accessories, this is the usual route.

dobar Mährobotergarage mit Pflanzkasten

Wood with plants on the roof (mit Pflanzkasten means with a planter box). The interior height of around 35 cm is enough for low mowers; with large all-wheel-drive models, measure first. The softwood is glazed in gray, white or natural, and dobar recommends repainting it at regular intervals. If you do not want to do that, steel or plastic will serve you better.

How we would decide

  • Gardena smart SILENO in the garden: the 15025-20. It sits on the station and needs no measuring.
  • Husqvarna Automower: the garage by model number, for NERA the 536 66 41-01.
  • Worx Landroid Vision: the WA0821, which is designed for this series.
  • Mower without a manufacturer garage, paving as the base: the steel cover from Juskys, provided the entrance matches the station.
  • Low mower, garage should disappear into the flower bed: dobar in wood, if you plan for repainting.

One more note on the location. Around the garage, grass grows that the robot cannot reach. A neatly laid strip of paving or metal saves you trimming by hand there; more on this in our lawn edging guide.

If you run a GOAT from Ecovacs, the manufacturer offers its own garage for the A and O series made of stainless steel. It is not intended for other brands; we have not seen any documentation from Ecovacs on ventilation and reception under the roof.

What happens to the mower and station in winter is covered in our guide to winter storage.

How tedious assembling a metal garage can be is shown in our review of the folding GARDEBRUK robot mower garage, with sharp sheet metal and misaligned holes.

Frequently asked questions

Does a robot mower even need a garage?

The machines are built for outdoor use; the real enemy is the sun. Husqvarna specifies 0 to 45 °C for charging, measured inside the housing. If the station sits on the south side without shade, that limit is reached quickly. A garage does not replace a good location; it improves a mediocre one.

Can a robot mower with a garage stay outside in winter?

No. Husqvarna recommends storing the mower dry in a heated room at around 10 to 15 °C, charging the battery to at least 50 percent beforehand and also storing the charging station dry over the winter. If you are hoping a garage lets it stay out until March, you are buying with the wrong expectations.

Wood, metal or plastic: which material is right?

Plastic usually comes from the mower manufacturer and sits directly on the station. Galvanized steel stands freely and needs level ground and anchoring. Wood blends in visually but has to be repainted regularly. The dimensions matter more than the material.

What should you look for in a universal robot mower garage?

Measure the mower first, then compare pictures. A Worx Landroid Vision L1300 is 26.5 cm tall; with 35 cm of interior height, that leaves a good 8 cm of clearance, which shrinks on a sloping lawn. The entrance also has to match the station; otherwise every docking becomes a gamble.

Which garage fits the Husqvarna Automower?

Husqvarna makes the garage in several versions that are strictly tied to model series. For the NERA series, it is the 536 66 41-01 at 95.4 × 74 × 51 cm; the 435X AWD needs its own version. Order by model number, not by photo.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.