Contents11 sections
This guide was first published in German on handgetestet.de.
Power drill, fuse box, flush-mounted box. Anything that sounds like a job for a tradesperson is tricky in a rented apartment. That still does not have to stop the smart home. The most sensible start is radiator thermostats such as the tado-Starter-Kit X, because they only replace the screw-on head on the valve and simply come with you when you move. Lighting follows with bulbs for the existing socket, and the door with an add-on that sits on the lock cylinder.
What can I install as a renter without permission?
More than many people think. In its information sheet „Sicher wohnen“ (living safely), the Mieterverein zu Hamburg, a German tenants‘ association, draws a clear line: changes inside the apartment that do not affect the building fabric need no approval. As an example, it names a more elaborate lock on the apartment door. You should keep the old lock so it can go back in when the tenancy ends. According to the tenants‘ association, you may install an alarm system inside the apartment without asking, but not on the facade.
A door viewer is different. It requires drilling through the door leaf, so it generally needs the landlord’s approval. Keep this in mind with digital door viewers too, if they require drilling.
And at the end? Under Section 546 of the German Civil Code (BGB), you return the apartment when the tenancy ends. The tenants‘ association sums up the consequence: tenants generally have to restore the original condition, unless the landlord has waived removal in writing. Conversely, Section 539 (2) BGB allows you to take your own fixtures with you. For smart devices, that means in practice: label the original parts, put them in a box and keep them until you move out. This is general information, not legal advice. In case of a dispute, your local tenants‘ association can help.
And a camera at the apartment door?
Here we advise renters in apartment buildings to hold back. The Verbraucherzentrale, Germany’s consumer advice center, writes that private cameras belong on your own property. Neighboring properties, public paths and shared driveways are generally off-limits. For doorbell cameras, it cites the position of the Datenschutzkonferenz, the conference of German data protection authorities: image only after the bell is rung, no permanent storage, end transmission after a few seconds, field of view no larger than with a door viewer. How seriously courts take the stairwell is shown by a ruling of Germany’s Federal Court of Justice (BGH) of March 12, 2024 (VI ZR 1370/20). A landlord had secretly had the area opposite the apartment doors filmed. The BGH saw this as a serious violation of personal rights, because nobody has to expect recordings in a stairwell. A camera that looks from your own door frame into the hallway should therefore be discussed with your landlord and neighbors beforehand.
Six devices that come with you when you move out
| Model | Installation and removal | Wireless standard and hub | Best for |
|---|---|---|---|
| tado Smartes Heizkörperthermostat X (Starter Kit) | replaces the old head, six adapters | Bridge X (in the Starter Kit) or Thread border router | renters with radiators who want to tackle heating costs |
| Eve Thermo (Matter, 5th gen.) | replaces the old head, adapters for Danfoss RA, RAV, RAVL | Matter over Thread, separate border router required | households with Apple Home or Google Home |
| Philips Hue Starter-Set E27 (2 bulbs, Bridge) | screws into existing lamps | Zigbee via Hue Bridge, Bluetooth | anyone starting with lighting |
| Eve Energy (Matter) | plug-in adapter for the outlet | Matter over Thread, separate border router required | floor lamp, fan, measuring consumption |
| SwitchBot Bot | adhesive tape next to the switch | Bluetooth, SwitchBot Hub for remote access | light switches and device buttons without modification |
| Nuki Smart Lock Pro (5th gen.) | inside on the existing cylinder, no drilling | built-in Wi-Fi, Matter over Thread | apartment door with a suitable cylinder |
tado Smartes Heizkörperthermostat X
Our favorite for most rented apartments. The battery is removed for charging and recharged via USB-C, according to tado in about two hours and roughly once a year. Six adapters are included. The Starter Kit contains the Bridge X; if you already own a suitable Thread border router, you do not need it, according to the manufacturer. The older Internet Bridge of the V3+ series does not work with the X devices. Remote control and schedules are included in the app; convenience features such as open window detection are part of the paid add-on subscription. Removing the old head sometimes takes a wrench, and according to tado’s help pages, some heads can only be loosened with the valve fully open.
Eve Thermo (Matter, 5th gen.)
Eve relies on two AA batteries and a display with a touch panel on the device. It mounts on the M30 × 1.5 thread, and adapters for Danfoss RA, RAV and RAVL are included. According to Eve, no water escapes during installation. There is no dedicated bridge. You need a hub that controls Matter and works as a Thread border router. The Eve app only creates custom schedules with an iPhone or iPad in Apple Home or with Android in Google Home. With Alexa alone, it does not work.
Philips Hue Starter-Set E27
Two bulbs for the common E27 socket and the Hue Bridge. According to Philips, each bulb delivers up to 1,055 lumens at 4,000 kelvin, draws 11 watts and ranges from 2,000 to 6,500 kelvin, plus colored light. The landlord’s ceiling light stays as it is. Only the wall switch has to stay on, otherwise the bulb has no power. If you would rather stick a wireless button next to the door instead, you will find suitable models in our guide to smart buttons (in German).
Eve Energy (Matter)
In Europe, the plug-in adapter switches up to 11 amps or 2,500 watts, but incandescent bulbs only up to 240 watts. It measures consumption, and the Eve app calculates costs using your electricity rate. Eve promises: no subscription, no registration, no Eve cloud. Because it works as a Thread router, it also strengthens the wireless network for the Eve Thermo along the way.
SwitchBot Bot
A small arm, 43 × 37 × 24 millimeters, that presses buttons. It sticks next to the switch, and the instructions call for a clean, dry surface and 24 hours of waiting time until the adhesive holds. It presses buttons in press mode. For switches that are pushed and then pulled back, there is a switch mode with an extra part; two of these are included. According to SwitchBot, the CR2 battery lasts 600 days under laboratory conditions at two actuations per day. Without a hub, everything only runs via Bluetooth from your phone. The instructions explicitly advise against using it to switch ovens or heaters.
Nuki Smart Lock Pro (5th gen.)
The Pro sits on the inside of the existing cylinder and, according to Nuki, is installed without drilling. Wi-Fi is built into the device, and the battery charges via a magnetic connector. The cylinder is what matters. According to Nuki, it needs an emergency function so the door can be opened from the outside when a key is inserted on the inside. If it protrudes less than 6 millimeters, the adhesive mounting plate is used, and the key may stick out no more than 37 millimeters. If the emergency function is missing, Nuki points to the Smart Lock Ultra with its own cylinder. Then the tenants‘ association’s rule applies: keep the old cylinder. If it is part of the building’s master key system, talk to the property management first. Our smart lock guide compares more models.
Where do I start?
- High heating costs, several radiators: the tado-Starter-Kit X. It includes the bridge and needs no battery changes.
- Already a Matter hub with a Thread border router in the household: Eve Thermo and Eve Energy, both without an additional bridge.
- Just lighting for now: the Hue set for two bulbs. A living room rarely needs more at the start.
- Old switches or devices with a button: the SwitchBot Bot. No cable, no hole.
- The apartment door: Nuki Pro, but only after checking the cylinder’s emergency function and protrusion.
Prefer everything from a single source? We present coordinated bundles for heating and lighting in our guide to smart home starter sets.
For homeowners who want to protect the main water line, the guide to water shutoff valves explains the technology and installation rules.
Frequently asked questions
What can I install as a renter without permission?
According to the Mieterverein zu Hamburg (a German tenants' association), changes inside the apartment that do not affect the building fabric need no approval, such as a more elaborate lock. An alarm system inside the apartment is allowed, but not on the facade. A door viewer requires drilling through the door leaf, so it generally needs the landlord's consent.
Do I have to remove smart devices when I move out?
In principle, yes: under Section 546 of the German Civil Code (BGB), you return the apartment, and the tenants' association sums this up as an obligation to restore the original condition, unless the landlord waives it in writing. Section 539 BGB allows you to take your own fixtures with you. Label the original parts and keep them until you move out. This is general information, not legal advice.
Can I install a camera at my apartment door as a renter?
In an apartment building, we advise restraint. The Verbraucherzentrale (German consumer advice center) writes that private cameras belong on your own property. In 2024, Germany's Federal Court of Justice (BGH) ruled that secretly filming in a stairwell is a serious violation of personal rights. Discuss a camera that looks into the hallway with your landlord and neighbors beforehand.
Do I need a bridge for the Eve Thermo?
There is no dedicated Eve bridge. You need a hub that controls Matter and works as a Thread border router. The Eve app only creates custom schedules with an iPhone or iPad in Apple Home or with Android in Google Home; with Alexa alone, it does not work.
Does the Nuki Smart Lock Pro fit every apartment door?
The cylinder is what matters. According to Nuki, it needs an emergency function so the door can be opened from the outside when a key is inserted on the inside. If it lacks one, Nuki points to the Smart Lock Ultra with its own cylinder. If the cylinder is part of the building's master key system, talk to the property management first.
How do I make old light switches smart without modifying anything?
With the SwitchBot Bot, a small arm that sticks next to the switch and presses buttons. The instructions call for a clean, dry surface and 24 hours for the adhesive to set. Without a hub, it only works via Bluetooth from your phone, and it should not be used to switch ovens or heaters.
Sources
- Mieterverein zu Hamburg: Information sheet 38 „Sicher wohnen“ (living safely)
- Section 546 German Civil Code (BGB): Tenant’s obligation to return the property
- Section 539 German Civil Code (BGB): Reimbursement of other expenses and right of removal
- Verbraucherzentrale: Only film your own property with surveillance cameras
- Mieterverein zu Hamburg on BGH ruling of March 12, 2024, VI ZR 1370/20
- tado: Smart Radiator Thermostat X
- tado help: Removing the old thermostat head
- Eve Thermo
- Eve Energy
- Philips Hue Starter-Set E27, 2-pack
- SwitchBot Bot: User manual (German)
- Nuki Smart Lock Pro (5th generation)
- Nuki: Smart Lock Pro compatibility
Where to buy
- tado Smartes Heizkörperthermostat X Starter KitCheck price at Amazon.deAvailable in Germany: Amazon.de
- Eve Thermo (Matter, 5. Gen.)Check price at Amazon.deAvailable in Germany: Amazon.de
- Philips Hue Starter-Set E27 (2 Lampen, Bridge)Check price at Amazon.deAvailable in Germany: Amazon.de
- Eve Energy (Matter)Check price at Amazon.deAvailable in Germany: Amazon.de
- SwitchBot BotCheck price at Amazon.deAvailable in Germany: Amazon.de
- Nuki Smart Lock Pro (5. Gen.)Check price at Amazon.deAvailable in Germany: Amazon.de

