Contents12 sections
This guide was first published in German on handgetestet.de.
If you own a front door with a motorized lock, you already have the most important part installed: a motor that extends several bolts, and a control unit waiting for a pulse. A smart lock that sits on the outside of the cylinder and turns it is usually the wrong approach for such doors. A controller connected directly to the lock control unit makes more sense. For Homematic IP households, that is the Homematic IP Universal Motorschloss Controller HmIP-FLC (universal motorized lock controller), and it is our recommendation for doors whose lock is on its list.
Whether that applies to your door depends on a few questions. We go through them one by one.
First question: does your door have a motor at all?
Many front doors have multipoint locking, meaning several bolts along the lock side. On most of them, the key extends the bolts mechanically. A motorized lock needs power, so a cable runs from the frame into the door leaf, and there is a power supply somewhere in the house. Often a button, a fingerprint reader or the intercom opens the door. Exactly which lock is installed is stated in the door manufacturer’s documents; if they are missing, ask the manufacturer, giving the year of construction and the order number.
No cable, no motor? Then the option is a drive that sits on the cylinder on the inside. The section on the Homematic IP Set Zutritt and Nuki further below is for you, as is our guide to the smart lock.
Second question: which lock is in the door?
The HmIP-FLC is not a lock but a small flush-mounted module with four inputs and two switching outputs. One output switches between day and night mode, the other sends the opening pulse. This requires the motorized lock to have its own control unit from the manufacturer that monitors all technical values. That is what the manual says.
eQ-3 names Winkhaus blueMatic EAV4 and EAV4+, Winkhaus blueMotion+, MACO M-TS, Fuhr autotronic and multitronic, Siegenia GENIUS and Roto Eneo as examples. KFV and GU locks do not appear on this list. That does not mean they will not work. It means that a specialist has to check the connections of the lock control unit beforehand. If you order without this check, you may end up buying a module that ends up in a drawer.
The devices at a glance
| Model | Door type | Key data according to manufacturer | Best for |
|---|---|---|---|
| Homematic IP Universal Motorschloss Controller HmIP-FLC | Motorized lock with control unit | 12 to 24 V DC, 4 inputs, 2 outputs, flush-mounted box | Owners with a compatible motorized lock |
| Homematic IP Access Point 2 HmIP-HAP2 | all | Hub for up to 120 devices, app, AES-128 | Required for the FLC if there is no other hub |
| dnt Fingerprintcodeschloss BioAccess PRO | Motorized lock or door opener | Finger, RFID, code, IP66, relay max. 2 A | Keyless entry on the outside wall |
| Homematic IP Set Zutritt | Mechanical multipoint locking | Access Point 2, keypad, door lock drive on the cylinder | Doors without a motor, including rentals |
| Homematic IP Türschlossantrieb Pro HmIP-DLP | Mechanical, cylinder | 4 × AA, tamper sensors, adhesive, clamp or screw mounting | Doors without a motor, when tampering should be reported |
| Nuki Smart Lock Ultra | Mechanical, cylinder | SKG*** cylinder included, Wi-Fi, Thread, Matter, rechargeable battery | Doors without a motor, without Homematic |
Homematic IP Universal Motorschloss Controller HmIP-FLC
The module measures 52 × 52 × 15 mm and fits into a switch box; eQ-3 recommends boxes more than 50 mm deep. It needs its own power supply with safety extra-low voltage and 12 to 24 V, which is not included. Via its inputs, it detects whether the door is open or closed and whether it is locked, provided the lock supplies these signals. Day and night mode can be switched by time of day in the app. On the Winkhaus blueMotion+, for example, the swing bolts stay retracted in day mode and extend on closing in night mode. According to the manual, a code lock or a fingerprint reader with a pulse output can also be connected to an input.
The limits: nothing works without an access point or hub. And the manual is clear. Improper installation risks property damage up to and including fire, and the connection is made by an electrician.
Homematic IP Access Point 2 HmIP-HAP2
The access point is the hub through which the app, time profiles and remote access run. It connects to the router and, according to the data sheet, links up to 120 devices, encrypted with AES-128; the servers are located in Germany. If you already have one or use a Home Control Unit, you do not need a second one. More on choosing a hub is in the guide to the smart home hub.
dnt Fingerprintcodeschloss BioAccess PRO
A reader for the wall next to the door, weatherproof to IP66 and designed for −30 to +60 °C. It accepts up to 100 fingerprints, RFID cards and codes with four to six digits, up to 1000 credentials in total, plus a tamper sensor. It switches a potential-free relay that can send a pulse to the lock control unit or to the FLC.
One point the specialist should clarify with you: in simple operation, the relay sits in the device on the outside wall. dnt describes operation with an external Wiegand controller inside the house as a particularly secure variant. The BioAccess PRO has no app. If you want to manage users conveniently on your phone, take a look at the guide to the smart lock keypad.
Homematic IP Set Zutritt
For the door without a motor. The set (access set) consists of the Access Point 2, the HmIP-DLD door lock drive and the HmIP-WKP keypad. The drive sits on the inside on a profile cylinder with an emergency and hazard function, which has to protrude 8 to 15 mm for this, and according to the data sheet it also works with multipoint locking. The keypad goes on the outside wall without cables and manages up to eight codes, including time windows for a cleaner or a home care service. Three AA cells typically last half a year. According to eQ-3, nothing on the door, frame or key is damaged. New in the range is the Türschlossantrieb Pro HmIP-DLP (door lock drive Pro), sold individually and not in the set. According to the data sheet, it reports vibrations and removal attempts, typically lasts a year and a half on four AA cells and can also be glued onto cylinders with no protrusion at all. How to retrofit in a rented apartment in a way that can be removed again is described in the guide Smart home for renters (in German).
Nuki Smart Lock Ultra
The alternative without Homematic, available from Amazon. Nuki supplies its own cylinder, which according to the manufacturer meets class SKG*** and is certified to EN 1303 and the German standard DIN 18252. So the old cylinder comes out. Wireless communication runs via Wi-Fi or Thread, integration via Matter. Code or fingerprint access is added with a separate Nuki Keypad.
What happens during a power outage?
The concern is justified. The answer lies with the lock manufacturer, not the controller. For the blueMotion+, Winkhaus describes an energy store that keeps the door operable with a key or handle even during a power outage. According to the operating notes for the key-operated version, a quarter turn of the key is then enough to lock or unlock. The key therefore remains the emergency route, and it does not belong in a drawer but on your key ring.
With cylinder drives, it is simpler. The Homematic drive has a thumb wheel for manual operation, and both systems rely on cylinders with an emergency and hazard function that lock from the outside with the key, even when the drive is engaged on the inside.
Renter or owner
Wiring a motorized lock means working on the door and the electrical installation. Winkhaus requires qualified electricians or instructed persons for this. In a rented apartment, you should therefore clear it with the owner beforehand. For owners, it is a matter of two appointments: the door manufacturer or a specialist confirms the lock, and the electrician installs the box, power supply and controller.
How we would decide
- Motorized lock from the list, Homematic in the house or planned: Homematic IP Universal Motorschloss Controller HmIP-FLC, plus the Access Point 2 if there is no hub yet.
- Plus entry without a smartphone: BioAccess PRO on the wall, connected by a specialist, ideally with the controller inside the house.
- Motorized lock from another manufacturer: have the lock control unit checked first, then buy.
- Mechanical multipoint locking: Homematic IP Set Zutritt or, without Homematic, the Nuki Smart Lock Ultra.
- New front door in the planning stage: order the motorized lock and fingerprint reader straight from the factory; ekey, for example, supplies its dLine readers through door manufacturers, who build them into the door leaf.
What belongs in the conduit before plastering in a new build is covered in the guide to the flush-mounted video door station.
How often sensors get it wrong and what matters for emergency opening is covered in the guide to the fingerprint door lock.
Frequently asked questions
How can I tell whether my front door has a motorized lock?
A motorized lock needs power, so a cable runs from the frame into the door leaf, and there is a power supply somewhere in the house. Often a button, a fingerprint reader or the intercom opens the door. Which lock is installed is stated in the door manufacturer's documents.
Which motorized locks does the HmIP-FLC work with?
eQ-3 names Winkhaus blueMatic EAV4 and blueMotion+, MACO M-TS, Fuhr autotronic and multitronic, Siegenia GENIUS and Roto Eneo as examples. KFV and GU locks are not on the list. That does not mean they will not work, but a specialist has to check the connections beforehand.
What happens to a motorized lock during a power outage?
The answer lies with the lock manufacturer, not the controller. For the blueMotion+, Winkhaus describes an energy store that keeps the door operable with a key or handle. The key therefore remains the emergency route and belongs on your key ring, not in a drawer.
Which solution fits a door without a motor?
Then the option is a drive that sits on the cylinder on the inside. With Homematic, that is the Set Zutritt with Access Point 2, door lock drive and keypad; without Homematic, the Nuki Smart Lock Ultra with its own cylinder. According to eQ-3, the Homematic set causes no damage to the door, frame or key.
Can I make a motorized lock smart in a rented apartment?
Wiring a motorized lock means working on the door and the electrical installation, and Winkhaus requires qualified electricians or instructed persons for this. In a rented apartment, you should therefore clear it with the owner beforehand. Cylinder drives such as the Homematic IP Set Zutritt, by contrast, can be removed again.
Does the HmIP-FLC need a hub?
Nothing works without an access point or hub. According to the data sheet, the Access Point 2 HmIP-HAP2 connects up to 120 devices and provides the app, time profiles and remote access. If you already use an access point or a Home Control Unit, you do not need a second one.
Sources
- Homematic IP: Universal Motorschloss Controller
- eQ-3: HmIP-FLC operating manual (PDF)
- eQ-3: HmIP-FLC data sheet (PDF)
- ELV (German retailer): Universal Motorschloss Controller HmIP-FLC
- eQ-3: Access Point 2 data sheet (PDF)
- dnt: BioAccess PRO data sheet (PDF)
- dnt: BioAccess PRO operating manual (PDF)
- ELV: Homematic IP Set Zutritt
- eQ-3: HmIP-DLD door lock drive data sheet (PDF)
- eQ-3: HmIP-DLP door lock drive Pro data sheet (PDF)
- eQ-3: HmIP-WKP keypad data sheet (PDF)
- Nuki: Smart Lock Ultra
- Winkhaus: blueMotion+
- ekey: dLine Fingerprint
Where to buy
- Homematic IP Universal Motorschloss Controller HmIP-FLCView at ELVAvailable in Germany: ELVCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Homematic IP Access Point 2 HmIP-HAP2View at ELVAvailable in Germany: ELV
- dnt Fingerprintcodeschloss BioAccess PROView at ELVAvailable in Germany: ELVCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Homematic IP Set ZutrittView at ELVAvailable in Germany: ELV
- Homematic IP Türschlossantrieb HmIP-DLDCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Homematic IP Türschlossantrieb Pro HmIP-DLPCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Nuki Smart Lock UltraView at CoolblueAvailable in Germany: CoolblueCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
