Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Buying a Turntable 2026: Preamp, Bluetooth, Drive System

Buying a turntable: why the phono preamp decides whether it works with powered speakers, what separates belt drive from direct drive, and when Bluetooth is enough.

handgetestet editorial team · Updated November 17, 2026
Audio-Technica AT-LP120XBT-USBImage: Coolblue (Pressebild)
Contents13 sections

This guide was first published in German on handgetestet.de.

Why do your new powered speakers produce barely any sound even though the turntable is spinning? It usually comes down to the cable, not the device. A turntable without a built-in preamp delivers almost nothing straight into powered speakers, and the little that comes out sounds thin. If you want to do without an amplifier, you should therefore choose a model with a switchable phono preamp, such as the Audio-Technica AT-LP120XBT-USB with direct drive, Bluetooth and USB. If sound matters more than features and you are running cables anyway, the Rega Planar 1 Plus is our pick.

What is the deal with phono and line?

A cartridge delivers only a few millivolts. For the AT-LP3XBT in phono mode, Audio-Technica specifies 4.0 mV, and Denon lists 2.5 mV for the DP-450USB. An amplifier with a phono input boosts this signal and equalizes it according to the RIAA curve. Powered speakers, soundbars and most Bluetooth speakers do not have such an input. They expect line level. At Denon, that is 150 mV with the preamp switched on, roughly sixty times higher. That is why many turntables have a small switch on the back labeled “Phono” and “Line.” Set to Line, the signal goes straight into powered speakers; which powered speakers are suitable is covered in the studio monitor guide. Set to Phono, an existing hi-fi amplifier takes over the job. And if there is no preamp at all, as with the Pro-Ject Debut EVO 2? Then a separate device has to go in between. That is not a flaw. Just one more little box and one more item on the bill.

Belt or direct drive: does it make a difference?

With belt drive, the motor sits off to the side and transmits its power via a rubber belt, which keeps motor vibrations away from the platter. Direct drive turns the platter without any detour, gets up to speed faster and never needs a belt replacement after years of use. For simply listening to music, both principles are good enough. Direct drive tends to play to its strengths when you change records often or play with the pitch.

And what about the cartridge, 78 rpm and automatic operation?

Almost all the turntables here use an MM cartridge. More important than the name is whether the stylus can later be replaced on its own and whether a removable headshell is included, because then an upgrade to a better cartridge is open to you in a few years. Only people with shellac records need 78 rpm. If you inherit your grandmother’s shellac collection, put it on the list. Otherwise, skip it. A fully automatic turntable, in turn, lowers the stylus by itself and lifts it at the end, which protects records and stylus with beginners and in households with children.

Is Bluetooth enough?

It is convenient, but a compromise. The signal is digitized, compressed and converted back. If you buy vinyl for its analog path, this takes exactly that path out again. For headphones in the evening or a Bluetooth speaker in the kitchen, that is perfectly fine. On the main system in the living room, we would still use a cable.

Six turntables side by side

ModelDrive and speedsPreamp, wireless, USBCartridgeBest for
Audio-Technica AT-LP120XBT-USBDirect drive, 33/45/78Switchable phono preamp, Bluetooth, USBAT-VM95E (MM)Anyone who wants to connect a lot and digitize
Audio-Technica AT-LP3XBTBelt, fully automatic, 33/45Switchable phono preamp, BluetoothAT-VM95C (MM)Beginners who do not want to adjust anything
Teac TN-400BT-XBelt, 33/45/78Phono preamp with Thru switch, BluetoothAT95E (MM)Living rooms with a wood look and wireless headphones
Denon DP-450USBBelt, 33/45/78, auto stopSwitchable phono preamp, USB recording to a stickMM cartridge pre-mountedCollectors who back up records without a computer
Rega Planar 1 PlusBelt, 24 V synchronous motorBuilt-in phono preamp, no wirelessRega Carbon (MM)Sound-focused buyers with powered speakers
Pro-Ject Debut EVO 2Belt, 33/45 electronicNo preampPick it MM EVOOwners of an amplifier with a phono input

Audio-Technica AT-LP120XBT-USB

According to the manufacturer, the direct drive turns at 33, 45 and 78 rpm, and a slider adjusts the pitch. Alongside the switchable phono preamp, there is Bluetooth and a USB output through which the computer records the signal at 16 bits. Without the dust cover, the unit weighs 8 kg according to the manual. For a turntable in this price range, that is plenty of features. Skipping Bluetooth does not save you anything here.

Audio-Technica AT-LP3XBT

A fully automatic turntable with belt drive. Press start, the arm lowers and returns at the end. Audio-Technica lists Bluetooth 5.2 with aptX Adaptive, aptX and SBC, plus a switchable preamp. The AT-VM95C sits on a removable headshell and, according to the manufacturer, accepts the styli of the VM95 series. Convenient for beginners. If you want to play 78s or plan to do a lot of fine-tuning later, keep looking.

Teac TN-400BT-X

Teac combines a die-cast aluminum platter, three speeds and an S-shaped tonearm tube with a removable headshell. According to the manufacturer, the built-in preamp has a subsonic filter below 18 Hz; it can be bypassed via “Thru.” Teac’s own specifications contradict each other on the Bluetooth codec, so check before ordering whether your headphones are compatible with the turntable. In the Teac shop, the walnut version was recently in short supply.

Denon DP-450USB

Records straight to a USB stick, as MP3 at 192 kbps or as WAV in CD quality, and all without a computer: that is the specialty of this belt-drive turntable. According to the manufacturer, the arm lifts automatically at the end of the record. Denon does not list Bluetooth for this model, and among the belt-drive turntables here, it is not the cheapest. It becomes interesting for collectors with many records who want a digital copy.

Rega Planar 1 Plus

A classic Rega design with the hand-assembled RB110 arm and the Rega Carbon cartridge, complemented by a built-in MM preamp. That lets it connect directly to powered speakers or to an amplifier’s line input. No Bluetooth, no USB. That is exactly its appeal if you are looking for a simple turntable where everything revolves around the arm, drive and cartridge rather than connectivity.

Pro-Ject Debut EVO 2

One-piece carbon arm and electronic speed switching, so the belt stays on the pulley. Pre-mounted is the Pick it MM EVO, which Pro-Ject developed together with Ortofon. Pro-Ject does not list a preamp in the scope of delivery. With powered speakers, it therefore needs an additional device. If you own an amplifier with a phono input, you do not have to worry about that; everyone else should look at the turntables further up first.

Which turntable suits my setup?

If only powered speakers are connected and the device should do as much as possible, the Audio-Technica AT-LP120XBT-USB is the obvious choice, with preamp, Bluetooth and USB in one housing. Also for powered speakers, but with sound ahead of features, there is the Rega Planar 1 Plus: fewer connections, but the simplest signal chain. Convenient and with no adjusting? The fully automatic AT-LP3XBT. If a record collection is to be backed up and recording to a stick without a computer matters, the Denon DP-450USB is worth considering. If you already have an amplifier with a phono input, the Pro-Ject Debut EVO 2 fits.

And what if there is already a soundbar in the living room? With an analog input, any turntable with a line output will do. Without that input, Bluetooth is the only option, and then both sides should support the same codec.

Frequently asked questions

Why do my powered speakers produce barely any sound from the turntable?

Usually the preamp is missing. A cartridge delivers only a few millivolts, while powered speakers and soundbars expect line level. A turntable with a built-in phono preamp, switched to Line, connects directly to the speakers. If there is no preamp, as with the Pro-Ject Debut EVO 2, a separate device has to go in between.

Belt drive or direct drive: which is better?

For simply listening to music, both are good enough. The belt keeps motor vibrations away from the platter. Direct drive gets up to speed faster and never needs a belt replacement after years of use. It shows its strengths when you change records often or play with the pitch.

Is a turntable with Bluetooth enough?

It is convenient, but a compromise. The signal is digitized, compressed and converted back, so the analog path is lost. For headphones in the evening or a speaker in the kitchen, that is fine. On the main system in the living room, we would use a cable.

Do I need 78 rpm?

Only if you own shellac records, such as an inherited collection. Turntables with three speeds include the Audio-Technica AT-LP120XBT-USB, the Teac TN-400BT-X and the Denon DP-450USB. The fully automatic AT-LP3XBT and the Pro-Ject Debut EVO 2 only run at 33 and 45.

How do I digitize vinyl records without a computer?

With the Denon DP-450USB. It records records directly to a USB stick, as MP3 at 192 kbps or as WAV in CD quality. According to the manufacturer, the arm lifts automatically at the end of the record. Denon does not list Bluetooth for this model.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.