Contents13 sections
This guide was first published in German on handgetestet.de.
A set of ratcheting combination wrenches saves more time on the brakes or the bike kickstand than any extra wrench in the case. For home, car and bike, we consider a ratcheting set from 8 to 19 mm the sensible basic kit, and among current sets, we think the Wera 6000 Joker 11 Set 1 is the most well-rounded choice. If, on the other hand, you loosen large bolts that take a lot of force, you are better off with the classic combination wrench without a mechanism.
Before getting to brands, it is better to look at your own bolts, or more precisely, at their heads.
Which sizes do I really need?
The wrench size is the distance between two opposite flats of the hexagon. It depends on the thread, but not only on the thread. When the old German DIN standards for hex bolts were converted into ISO standards, four sizes changed: under ISO, M10 takes 16 instead of 17 mm, M12 takes 18 instead of 19 mm, M14 takes 21 instead of 22 mm and M22 takes 34 instead of 32 mm. That is what Würth’s overview of standard parts says. So in the boiler room of an older building, you will often still find 17s and 19s, while newer furniture and appliances tend to have 16s and 18s.
That leads to a simple rule. A set should cover every size from 8 to 19 mm without gaps. Four- or five-piece sets with 10, 13, 17 and 19 mm look tidy but leave out precisely the ISO sizes 16 and 18. If you also work on wheel nuts, tractors or garden equipment with large bolts, you need sizes above 19 mm, and those are almost only found in sets without a ratchet. For bolts that sit deep in a recess, a socket set is the better addition. Where an exact tightening torque is specified, our torque wrench guide (in German) will help.
Ratchet, teeth and swing angle
A ratcheting ring grips the nut, and as you swing back, the teeth click onward without you having to lift the wrench off. The more teeth, the smaller the minimum angle the handle has to travel. With 72 teeth that is 5 degrees, with 80 teeth 4.5 degrees in theory. That sounds like hair-splitting. Behind a fender, where the handle has only a hand’s width of room, it decides whether the bolt turns at all.
The ratchet has one weakness. A box-end wrench without a mechanism is more solid, and Wera itself writes in its safety instructions that box-end wrenches transmit force more evenly and are better suited to high torque. For rusted-on exhaust bolts, the classic combination wrench therefore remains the more robust choice. Whether the box end is straight, flat or offset determines access: an offset ring keeps your fingers off the surface, while a flat one fits into narrow gaps.
Chrome vanadium, chrome molybdenum and what the stamps reveal
„Chrome vanadium“ is stamped on almost every wrench, even the most basic ones. The label only describes the alloy, not the quality of the heat treatment or how precisely the open end fits. Gedore specifies 31CrV3 steel for its wrenches, Wera uses chrome molybdenum steel for the Joker, and Stahlwille speaks of a chrome alloy steel, drop-forged and oil-hardened. Standards such as DIN 3113 and ISO 7738 on the manufacturer’s page are more meaningful. Hazet states that the torque values of its combination wrenches are well above the DIN ISO requirements in all sizes.
Six wrench sets and their key specs
| Model | Sizes | Ratchet and head | Steel according to the manufacturer | Best for |
|---|---|---|---|---|
| Wera 6000 Joker 11 Set 1 | 8 and 10 to 19 mm, 11 wrenches | 80 teeth, open end with 30-degree return angle | Chrome molybdenum | Car, bike, home |
| Stahlwille OPEN-RATCH 17/12 | 8 to 19 mm, 12 wrenches | 72 teeth, 5 degrees, open end angled at 15 degrees | Chrome alloy, forged | Anyone who wants every size without gaps |
| Hazet 606N/12 | 8 to 19 mm, 12 wrenches | 72 teeth, 5 degrees, ring offset by 13 degrees | Chrome vanadium | Workshop, engine bay |
| Gedore 7 R-012 | 8 to 19 mm, 12 wrenches | Flat ratchet head | Chrome vanadium 31CrV3, matte finish | Narrow gaps, shallow spaces |
| Hazet 600N/17N | 7 to 27 mm, 17 wrenches | No ratchet, 12-point | Chrome vanadium | High forces, large bolts |
| Knipex Zangenschlüssel 86 03 250 | Infinitely adjustable, metric and imperial | Parallel, smooth jaws | Chrome vanadium electric steel | Faucets, chrome surfaces, odd sizes |
Wera 6000 Joker 11 Set 1
The Joker sets itself apart at the open end. A replaceable, hardened metal plate holds the nut, an end stop prevents it from slipping down according to Wera, and thanks to the 12-point design, a return angle of 30 instead of the usual 60 degrees is enough without flipping the wrench. The box end has a ratchet with 80 teeth. The set comprises 11 wrenches from 8 to 19 mm in a sturdy pouch. Only 9 mm is missing. If you only work on things occasionally, you will also find the sizes 10, 13, 17 and 19 mm in the Joker 4 Set 1, but then you have to do without 16 and 18 mm.
Stahlwille OPEN-RATCH 17/12
Twelve wrenches, every size from 8 to 19 mm, rolled up in a polyester pouch with a hook-and-loop closure. The integrated ratchet has 72 teeth and needs only a 5-degree working angle. The open end is angled at 15 degrees. No holding function in the open end, but no gaps in the size range either.
Hazet 606N/12
Hazet also covers 8 to 19 mm with twelve wrenches. The ratchet has 72 teeth and a 5-degree operating angle; only the two smallest sizes work with 60 teeth and 6 degrees. The box end is offset by 13 degrees, and the shank has a double-T profile. If you often have to reach over edges in the engine bay, the offset gives you an advantage.
Gedore 7 R-012
Gedore makes the ratchet head of this set flat. That helps where only a narrow gap remains between the nut and a wall, for example on furniture fittings or sheet-metal panels. The twelve wrenches from 8 to 19 mm are made of 31CrV3 chrome vanadium steel with a matte finish, and the set weighs 2.85 kg according to Gedore. If you would rather flip a switch than turn the wrench over, Gedore offers a reversible version, the 7 UR-012.
Hazet 600N/17N
This set forgoes ratchets and relies on mass and range. 17 wrenches from 7 to 27 mm in a long version, chrome-plated with polished heads, conforming to DIN 3113 Form A, ISO 3318 and ISO 7738. If you work on large nuts on a trailer or a riding mower, you need this range. For an apartment, we find it too bulky on its own, but as an addition to a ratcheting set, it makes sense.
Knipex Zangenschlüssel 86 03 250
Not a wrench set, but often the answer to the question of what works on a chrome-plated faucet or an imperial nut. This pliers wrench has smooth jaws that move in parallel, adjust at the push of a button directly on the workpiece and, according to Knipex, grip without damaging edges. According to the manufacturer, the mechanism multiplies hand force tenfold. It does not replace a box-end wrench on stuck nuts; there is more on pliers in our pliers set guide.
What damages a wrench
Wera sets clear limits in its safety instructions. Do not extend the lever arm, so no pipe over the handle. Do not hit the wrench with a hammer. Position the wrench at a right angle to the bolt axis, pull it toward you whenever possible and, if you have to push, push with an open palm. Only use the size that fits the head, especially at high torque. According to Wera, damaged tools should be discarded or sent back to the manufacturer, not put back in the drawer.
How we would decide
- Bolts on the car, the bike and around the house, often in tight corners: Wera 6000 Joker 11 Set 1, because the holding function and small return angle save the most time in everyday use.
- Every size from 8 to 19 mm without gaps: Stahlwille OPEN-RATCH 17/12 or Hazet 606N/12, the Hazet with an offset ring.
- Shallow spaces: Gedore 7 R-012.
- Large nuts and high forces: Hazet 600N/17N, ideally as a second set alongside a ratcheting one.
- Faucets and unusual sizes: Knipex Zangenschlüssel 86 03 250.
A four-piece set is only enough if you know for certain that your equipment has no ISO bolts with 16 or 18 mm.
Frequently asked questions
Which wrench sizes do I really need?
A set should cover every size from 8 to 19 mm without gaps. When the German DIN standards were converted to ISO, some sizes changed: M10 now takes 16 instead of 17 mm, M12 takes 18 instead of 19 mm. Four- or five-piece sets with 10, 13, 17 and 19 mm leave out precisely the ISO sizes 16 and 18.
What do more teeth on the ratchet do?
The more teeth, the smaller the minimum angle the handle has to travel. With 72 teeth it is 5 degrees, with 80 teeth 4.5 degrees in theory. Behind a fender, where the handle has only a hand's width of room, that decides whether the bolt turns at all.
Ratcheting wrench or classic box-end wrench?
A box-end wrench without a mechanism is more solid; Wera itself writes that it transmits force more evenly and is better suited to high torque. For rusted-on exhaust bolts, it remains the more robust choice. For large nuts, this guide names the Hazet 600N/17N with 7 to 27 mm.
Does chrome vanadium say anything about quality?
Not much. The label appears on almost every wrench and only describes the alloy, not the heat treatment or how precisely the open end fits. Standards such as DIN 3113 and ISO 7738 on the manufacturer's page are more meaningful.
Which set fits into tight, shallow spaces?
The Gedore 7 R-012 with a flat ratchet head. It helps where only a narrow gap remains between the nut and a wall, for example on furniture fittings or sheet-metal panels. The twelve wrenches cover 8 to 19 mm; a reversible version is called the 7 UR-012.
What damages a combination wrench?
Wera sets clear limits: no pipe over the handle, no hammering on the wrench, position it at a right angle to the bolt axis and pull it toward you whenever possible. Only use the correct size. Damaged tools should be discarded or sent back to the manufacturer.
Sources
- Wera: Data sheet 6000 Joker 11 Set 1
- Wera: Data sheet 6000 Joker 4 Set 1
- Wera: Safety instructions
- Stahlwille: OPEN-RATCH 17/12
- Hazet: 606N/12
- Hazet: 600N/17N
- Gedore: 7 R-012
- Gedore: 7 UR-012
- Knipex: Product data sheet Zangenschlüssel 86 03 250
- Würth: Hex bolts to DIN 933/931 and ISO 4014/4017
Where to buy
- Wera 6000 Joker 11 Set 1Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Stahlwille OPEN-RATCH 17/12Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Hazet 606N/12Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Gedore 7 R-012Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Hazet 600N/17NCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Knipex Zangenschlüssel 86 03 250Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Wera 6000 Joker 4 Set 1Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
