Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Buying Pond Lighting 2026: 24 V, IP68, Lumens, Winter

Planning pond lighting: why 24 volts, what IP68 really allows, which beam angle fits, and how to factor in the power supply, wildlife and winter.

handgetestet editorial team · Updated November 17, 2026
Three Oase LunAqua Connect S pond spotlights on ground spikesImage: ELV (Pressebild)
Contents14 sections

This guide was first published in German on handgetestet.de.

A June evening, the grill is cooling down, and the pond, the loveliest spot in the garden during the day, is now just a black surface. That is exactly where pond lighting comes in. For most garden ponds, we consider a plug-in 24-volt system with warm white spotlights the right way to start, such as the Oase LunAqua Connect S Set 3 with power supply and splitter. If you want color or app control later, you add individual lights instead of buying everything again.

Sounds simple. It is, as long as you understand a few numbers and take the power socket seriously.

Electricity near water: what the manufacturers require

All lights in this overview run on safety extra-low voltage, meaning 12 or 24 volts DC from a safety transformer. The lights themselves therefore fall under protection class III. The mains side remains the dangerous part. In its instructions, Oase requires the power supply to be set up at least 2 meters from the water and safe from flooding, connected to a socket with a residual current device (RCD) rated at no more than 30 mA. According to the manufacturer, outdoor electrical installation belongs in the hands of a qualified electrician. If there is no suitable outdoor socket at the pond, that is the first job, before the first spotlight. How to get power into the garden properly in the first place is explained in the guide to mains-powered garden lighting (in German).

Why 24 instead of 12 volts? At the same wattage, only half the current flows. A 30-watt circuit draws 2.5 amps at 12 volts and 1.25 amps at 24 volts. That keeps voltage losses on long cables low. With the Connect system, Oase allows up to 100 meters of cable between the power supply and the farthest light.

IP68, lumens, beam angle: reading three specs correctly

IP68 means dust-tight and protected against continuous submersion. How deep is up to the manufacturer, and that is exactly where the series differ. According to the instructions, the small Connect spots may sit permanently up to 1 meter deep, the large Power LED spotlights up to 4 meters. The plug connections are a separate matter: screw-type connectors of the Connect system may only be submerged briefly. So place splitters and couplings at the edge, not on the bottom of the pond.

Lumens tell you how much light comes out. A Connect S delivers 150 lumens, an XL spotlight 1,350. Underwater, a fair amount of that is lost, especially when the water is green. A well-running filter often does more for pond lighting than a stronger spot; more on that in the guide to pond pumps and pond filters.

The beam angle determines the effect. Oase lists the XL spotlights as Narrow Spot with 10 degrees, Spot with 15, Flood with 30 and Wide Flood with 45 degrees. Narrow means a bright spot that runs up a slender tree or a fountain. Wide means a belt of reeds or a waterfall is lit across a broad area, but less brightly. For the typical garden pond, 30 degrees usually works best, and that is what all Connect spots have.

Warm white or color?

Our clear position: warm white as the base light, color as an accent at most. There is an ecological reason for this, too. The lower nature conservation authority of the Ostallgäu district in Germany points out that artificial light can affect insects, amphibians and fish. It recommends warm white LEDs, timers and using light sparingly near habitats rich in insects. A pond is exactly that kind of habitat. So aim the spotlights at plants and stones rather than across the entire water surface, and leave one corner dark where fish and frogs can retreat. For us, a timer that switches off at 11 p.m. is part of the basic setup; suitable models are in the guide to the timer switch (in German).

Seven lights for pond and shore

ModelLight according to manufacturerVoltage, protection, wattageBest for
Oase LunAqua Connect S Set 33 × 150 lm, 3000 K, 30°24 V, IP68 to 1 m, 3 × 2.5 W, 36 W power supply includedGetting started, small to medium-sized pond
Oase LunAqua Connect M Solo warmweiß250 lm, 3000 K, 30°24 V, IP68 to 1 m, 4 WExpansion, shrubs and grasses
Oase LunAqua Connect M Solo RGB217 lm, colors, 30°24 V, IP68 to 1 m, 7.5 W, controller requiredColor accents via app
Oase LunAqua Power LED XL 4000 Flood1,350 lm, 4000 K, 30°24 V, IP68 to 4 m, 15 W, driver requiredTrees, fountains, deep ponds
Oase LunAqua Terra LED Set 66 × 10 lm, 120°12 V, IP68, 0.25 W each, can be walked onJetty, steps, pond edge
Oase Waterfall Illumination 30300 mm light bar, warm whiteIP68, 5 W, transformer includedStreams and waterfalls
Pontec PondoStar LED warm Set 33 × 1 W, warm white12 V transformer, IP68Small budget, mini pond

Oase LunAqua Connect S Set 3: the starting point

The set contains three small spots, a three-way splitter and the 36-watt power supply. According to the instructions, the spots each deliver 150 lumens at 3000 kelvin with a color rendering index of 95, which makes water lilies and stones look natural. Each light stands either on a base or a ground spike, and two extension pieces for more height are included. Without a controller, the white lights only switch via the socket or a timer and cannot be dimmed. That is enough for a small pond with planted banks, but not for a large tree. The drawback lies in the details: 3 meters of cable per spot is tight, and extensions cost extra.

Oase LunAqua Connect M Solo warmweiß

The medium size has 250 lumens at 4 watts. It connects to the same power supply. Just do the math: three S spots (7.5 W) plus two M spots (8 W) add up to 15.5 watts, so the 36-watt power supply has room to spare. For more light, there is the L version with 500 lumens and 6.5 watts; ELV (German retailer) says it suits trees up to about 10 meters.

Oase LunAqua Connect M Solo RGB and the controller

Colored light only works with the Oase LunAqua Connect Controller OASE Switch. The instructions describe control via an app over Bluetooth with a maximum range of 40 meters in open line of sight, not via Wi-Fi. If you want to switch the lights from your living room, pace off the distance first. The controller is only rated IP44 and belongs at the edge, safe from flooding, ideally 20 to 30 centimeters above the ground.

Oase LunAqua Power LED XL 4000 Flood

A different league. 1,350 lumens from 15 watts, neutral white at 4000 kelvin, overheating protection and a submersion depth of up to 4 meters. The spotlight needs its own driver, such as the Oase LunAqua Power LED Driver 3 m. According to the instructions, up to four Power LED lights with a combined maximum of 30 watts can be connected to it, so two XL spotlights. Outside the water, Oase requires 50 centimeters of clearance from flammable material. The neutral white light looks cooler than the Connect spots; in the same flower bed, the difference is noticeable.

Oase LunAqua Terra LED Set 6

Six in-ground lights for a wooden jetty, steps or the pond edge, powered at 12 volts via a plug-in transformer. With 10 lumens per light, they mark edges; they do not illuminate anything. You drill a hole 40 millimeters in diameter and at least 20 millimeters deep. Oase explicitly warns against connecting the set to a dimmable power supply.

Oase Waterfall Illumination 30

A 30-centimeter light bar that is placed at the top of a waterfall’s source bed and lights the falling water from within. According to ELV, it needs 5 watts, and the transformer is included. The same applies here: no dimmer. For a wider stream, there are the 60 and 90 versions.

Pontec PondoStar LED warm Set 3

The budget alternative: three warm white spots at 1 watt each, a 12-volt safety transformer, IP68, usable above and below water. Pontec does not state a lumen value. That is enough for a mini pond or a water basin on the patio, but the set cannot be expanded the way the Connect system can.

How we would plan it

  • Small pond, calm light: Connect S Set 3, plus a timer.
  • Pond with a tree or fountain: Connect system plus one XL spotlight on its own driver.
  • Color for special evenings: individual Connect M RGB lights with the controller, while the white spots remain the base light.
  • Jetty and shore: Terra LED Set 6.
  • Small budget: Pontec PondoStar, knowing that it will stay that way.

Care and winter

According to the instructions, the Oase lights may only operate underwater at water temperatures of 4 to 35 degrees Celsius. At the latest when ice forms, they come out and are stored dry. Unplug them first, because Oase requires all devices in the water to be disconnected from power before you reach in. Remove algae and limescale with clear water and a soft sponge, without harsh cleaners. If you keep the pond open for the fish in winter, you will find suitable devices in the guide to the pond heater (in German).

Anyone running power to the pond often plans the filter technology as well: see the guide to the pressurized pond filter.

Hole dimensions, load capacity and the question of the driveway are covered in the guide to in-ground garden lights (in German).

Frequently asked questions

Why 24 volts instead of 12 volts for pond lighting?

At the same wattage, only half the current flows. A 30-watt circuit draws 2.5 amps at 12 volts and 1.25 amps at 24 volts. That keeps voltage losses on long cables low; Oase allows up to 100 meters of cable with the Connect system.

What does IP68 mean for pond lights?

Dust-tight and protected against continuous submersion; how deep is up to the manufacturer. According to the instructions, the small Connect spots may sit up to 1 meter deep, the Power LED spotlights up to 4 meters. Screw-type connectors may only be submerged briefly, so splitters belong at the edge.

Warm white or colored pond lighting?

Warm white as the base light, color as an accent at most. The lower nature conservation authority of the Ostallgäu district in Germany points out that artificial light can affect insects, amphibians and fish, and recommends warm white LEDs and timers. Leave one dark corner as a retreat for fish and frogs.

Which beam angle suits a garden pond?

Usually 30 degrees, which all Connect spots have. Narrow angles of 10 or 15 degrees create a bright spot for a slender tree or a fountain. Wide angles such as 45 degrees light reeds or a waterfall across a broad area, but less brightly.

Do pond lights have to come out of the water in winter?

At the latest when ice forms. According to the instructions, the Oase lights may only operate underwater at water temperatures of 4 to 35 degrees Celsius. Unplug them first, then store them dry. Remove algae and limescale with clear water and a soft sponge.

How are colored Oase lights controlled?

Only via the OASE Switch controller. According to the instructions, the app connects via Bluetooth with a maximum range of 40 meters in open line of sight, not via Wi-Fi. The controller is only rated IP44 and belongs at the edge, safe from flooding.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.