Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Cleaning Vinyl Records: Brush, Cleaning Machine, Ultrasonic

Cleaning vinyl records: when a carbon fiber brush is enough, when you need a cleaning machine with vacuum drying, and what ultrasonic cleaners and stylus brushes can do.

handgetestet editorial team · Updated November 17, 2026
Contents11 sections

This guide was first published in German on handgetestet.de.

Crackling rarely has anything to do with the pressing. Usually there is dust in the groove, or an old flea market record carries a greasy film that no brush can remove. That is why our position is clear: a carbon fiber brush before every play belongs with every turntable, and if you regularly buy used records, you also need wet cleaning with vacuum drying. Ultrasonic cleaning is the luxury option. It makes sense when the collection is large and time is short.

Dry brushing or wet cleaning?

Both, just not for the same job. The brush picks up loose dust from the surface just before the stylus drops. It does not help against dried-on dirt. While cleaning its shellac holdings, the library of the Dublin Institute of Technology even noted that a dry brush can push surface dirt deeper into the groove. There, a wet clean with vacuum drying therefore always followed.

There are three routes to wet cleaning: manual devices with a bath and brushes, machines with a vacuum arm, and ultrasonic devices that make the water vibrate and then blow the record dry. Before buying, you should clarify five things:

  • How does the record get dry? Drip-drying in a rack takes time; vacuuming or a fan does it in minutes.
  • Does the label stay dry? A clamp or sealed cover over the label is a must.
  • Which formats work out of the box? With several devices, 7- and 10-inch adapters cost extra.
  • Which fluid does the device require, and is it safe for shellac?
  • How much space do you have? A vacuum machine is a tabletop unit weighing 6 to 8 kg.

Shellac, alcohol and the label

Old 78s are not vinyl. Shellac is a resin, brittle and delicate. The Dublin library warns that residual water on such records can cause swelling, and therefore dried every record immediately with a vacuum nozzle. Pro-Ject explicitly approves its alcohol-free fluid Wash it 2 for vinyl and shellac. With Knosti, the formula is a trade secret; in its test, the German music magazine Bonedo suspects a small proportion of isopropanol. For valuable shellac records, we would therefore only use a fluid that the manufacturer explicitly names for them.

The Library of Congress recommends handling records only by the edge and the label area, storing them upright, and keeping private collections cool at about 35 to 40 percent relative humidity. That saves more cleaning than any device.

Six helpers for groove and stylus

ModelPrincipleKey specs according to the manufacturer or testBest for
Pro-Ject VC-E2Wet cleaning with vacuum arm30 rpm, 0.5 l tank, 6.5 kg, magnetic clampCollectors who regularly buy used records
Pro-Ject VC-S3Wet cleaning with vacuum arm30 rpm, 2.5 l tank, 8.0 kg, magnetic clampLarge collections, stacks of record fair finds
Knosti Disco-Antistat Generation IIManual cleaning with goat hair brushesHand crank, label covers, rack for 7 records, approx. 1 l of fluidOccasional deep cleaning without power
HumminGuru HG01Ultrasonic with fan drying40 kHz, approx. 400 ml distilled water, 7 or 10 minutes per cycleLarge stacks without manual work
Pro-Ject Brush itCarbon fiber brush, dryConductive carbon fibers against dust and staticEvery turntable, before every play
Pro-Ject Clean itCarbon fiber stylus brushFor daily cleaning of the diamond tipEvery cartridge

Pro-Ject VC-E2: the vacuum machine for everyday use

Apply the fluid, spread it with the brush, lower the vacuum arm. According to Pro-Ject, the record is clean and dry after one or two rotations at 30 rpm; more rotations would tend to deposit new dirt. A magnetic clamp keeps the label dry. The collection tank holds 0.5 liters, and the device measures 31 × 27 × 21 cm. For 7-inch singles, Pro-Ject sells a dedicated kit. We consider the VC-E2 the most sensible way into vacuum cleaning, because it does everything necessary and fits on a sideboard.

Pro-Ject VC-S3: bigger tank, same principle

The bigger sibling works the same way but comes with a 2.5-liter inner tank that, according to the manufacturer, almost never needs emptying. At 8 kg and 42 × 33 × 27 cm, it needs a permanent spot. If you wash twenty records from a house clearance in one evening, you will notice the difference. With five records a month, not really.

Knosti Disco-Antistat Generation II: manual work with a crank

The record sits between two label covers with a rubber ring, hangs in a bath and is turned through two goat hair brushes with a hand crank. In its test, Bonedo praised the cleaning in the groove but criticized pouring the fluid back and forth and the risk to the label as soon as the covers are removed from the still-wet record. Drying takes place in a rack for seven records. In the test, the antistatic effect only lasted a while. For a single record, that is a lot of preparation; for a stack on a Sunday, it works.

HumminGuru HG01: ultrasonic cleaning on your desk

No brush is involved here. Two transducers generate 40 kHz in the bath, and then two fans with filters dry the record. The test by the American magazine Secrets of Home Theater and High Fidelity cites an automatic program of 7 minutes (quick) or 10 minutes (thorough) and around 400 ml of distilled water at 25 to 34 °C; at 35 °C, the device shuts off. The spec sheet in the test lists 60 to 75 dB. 12-inch records fit out of the box, and adapters for 10 and 7 inches are available as options. With pure water, the record did not dry quite completely in the test, only with a few drops of wetting agent. By the way, if you already own an ultrasonic cleaner for glasses and jewelry, that still does not give you a record holder or drying.

Pro-Ject Brush it: ten seconds before every side

Conductive carbon fibers pick up fine dust and, according to Pro-Ject, discharge static. It is intended for a quick pass before every play. That is all it is. It does not replace a cleaning machine, and conversely, even a freshly washed record only stays clean if you brush it before playing.

Pro-Ject Clean it: don’t forget the stylus

A clean record does little good if a ball of lint is hanging from the diamond tip. According to the manufacturer, the small carbon fiber brush is intended for daily cleaning and is also meant to discharge static. Which stylus your system has and when it should be replaced is explained in our guide to phono cartridges.

How we would decide

  • New records, hardly any used purchases: Brush it and Clean it are enough. Only records that audibly crackle get a wet clean.
  • Regular trips to record fairs and flea markets: add the VC-E2, plus Wash it 2 as a refill bottle.
  • Several hundred records, little time: the VC-S3 for its tank, or the HG01 if you would rather watch than brush.
  • An occasional stack, no room for a tabletop unit: the Knosti, with patience when drying.
  • Shellac 78s: only alcohol-free fluid with explicit approval, and dry immediately.

One last thought. Cleaning removes dirt, not damage to the groove. If you are just getting started, you will find turntables and setup aids in our guide to turntables (in German); general ultrasonic baths are compared in the guide to ultrasonic cleaners.

Frequently asked questions

Is a record brush enough for cleaning?

For loose dust just before playing, yes; against dried-on dirt, no. The library of the Dublin Institute of Technology noted that a dry brush can push surface dirt deeper into the groove. Used records with a greasy film therefore need wet cleaning with vacuum drying.

What should you look for when buying a record cleaning machine?

How the record gets dry, whether the label is protected by a clamp or a sealed cover, and which formats work out of the box. Also, which fluid the machine requires and whether it is safe for shellac. A vacuum machine is a tabletop unit weighing 6 to 8 kg and needs its own space.

How do you clean old shellac records?

Only with an alcohol-free fluid that the manufacturer explicitly approves for shellac, such as Pro-Ject Wash it 2. The Dublin library warns that residual water can cause shellac to swell, and it dried every record immediately with a vacuum nozzle.

Pro-Ject VC-E2 or VC-S3?

Both work with a vacuum arm and a magnetic clamp at 30 rpm. The VC-E2 has a 0.5-liter tank and fits on a sideboard. The VC-S3 comes with 2.5 liters and weighs 8 kg. With twenty records in one evening, you notice the difference; with five a month, not really.

Is ultrasonic cleaning worth it for records?

With a large collection and little time. The HumminGuru HG01 works at 40 kHz with fan drying, and one cycle takes 7 or 10 minutes. 12-inch records fit out of the box; adapters for 10 and 7 inches are optional. With pure water, the record did not dry quite completely in the test.

How should you store records so they stay clean?

The Library of Congress recommends handling records only by the edge and the label area, storing them upright, and keeping private collections cool at about 35 to 40 percent relative humidity. That saves more cleaning than any device. The stylus needs care, too, for example with the Pro-Ject Clean it.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.