Contents12 sections
This guide was first published in German on handgetestet.de.
If you are buying your first welder, you choose a process first and a brand only after that. For a garage or hobby workshop with sheet metal, tube and angle steel, we consider a MIG/MAG inverter with shielding gas such as the STAHLWERK MIG MAG 200 Spot Puls Pro Digital the most versatile choice, because it also handles stick and lift TIG. For repairs on thick parts outdoors, you are better served by a small stick welder from Lorch or Fronius. A gasless flux-core machine is inexpensive but produces the most smoke.
You will not find welding instructions here. The craft is learned at a supervised course workstation, not from an article.
Stick, TIG, MIG/MAG, flux-core: what the abbreviations mean
In stick welding (shielded metal arc, MMA), an arc burns between the workpiece and a coated stick electrode. The coating protects the weld pool, so no gas is needed. In return, you have to keep feeding the electrode, and slag remains on every seam. The process is more forgiving of wind and rust and is suitable for the fence, the trailer, the construction site.
In MIG/MAG welding, the machine pushes a wire from the spool through the torch, and shielding gas from the cylinder flows around the seam. Your hand only has to guide, not feed. That is easier on thin sheet metal, on a car body, for example. Without gas, it works with flux-core wire, which has a flux in its core. The air pays the price: the DGUV, the German Social Accident Insurance, rates flux-core welding as „very high“ in fume emission, and MIG, MAG and stick electrodes as „high.“
TIG is the finest process and, according to the same overview, produces the least smoke. However, it requires both hands, gas, a separate torch and a lot of practice. Many beginner machines offer „lift TIG“ or contact ignition: the arc is struck by briefly touching the workpiece. That is enough to start with.
Inverter and duty cycle: the number that decides on breaks
All the machines here are inverters. Electronics take the place of a heavy transformer, which is why the two stick welders here, at 150 to 160 A, weigh only 4.9 and 6.3 kg. Lorch specifies exactly 4.9 kg for the MicorStick 160.
More important than the maximum current is the duty cycle. Fronius explains it in the TransPocket manual using a ten-minute cycle: a 60 percent duty cycle means six minutes of welding and four minutes of cooling. The figure always applies at a specific current and usually at an ambient temperature of 40 °C. For the TransPocket 150, it is 35 percent at 150 A, 60 percent at 110 A and continuous operation at 90 A. Güde specifies 10 percent at the maximum current of 120 A for the SG 131 A-SYN. One minute of welding, nine minutes of waiting. That is enough for tack welds, but hardly for a long fillet weld on a gate frame.
Our advice: look at the current at 60 or 100 percent duty cycle. If the spec sheet only lists a single figure at maximum current, expect breaks.
What a 16 A outlet can deliver
All five machines run on 230 volts and have a German Schuko plug. Lorch and Güde specify 16 A as the mains fuse rating, Güde explicitly slow-blow. Fronius goes one step further: in the menu of the TransPocket 150, the existing fuse rating can be set. At 16 A, the machine delivers up to 150 A in stick welding, at 13 A up to 130 A, and at 10 A still 110 A. That way, the machine adapts to a weak circuit instead of tripping the circuit breaker.
STAHLWERK does not specify a fuse rating, but it does list the input currents. The highest effective input current is 12.4 A for MIG welding and 14.7 A for stick welding. According to the spec sheet, it can briefly reach up to 38 A. If a compressor or fan heater is also running on the same circuit, things get tight. A dedicated circuit in the garage is therefore a good investment; a qualified electrician takes care of the inspection.
On a generator, a rule of thumb from the Fronius manual applies: maximum apparent power of the welder times 1.35. More on choosing one is in the guide to generators.
Helmet, gloves, fume extraction, fire extinguisher
The equipment often costs as much as an inexpensive machine. It is not negotiable.
Eyes and face: DGUV Information 209-010 „Arc welding“ specifies shade numbers between 8 and 14 according to DIN EN 169, depending on the process and current. For anyone who strikes the arc often, for example when tacking short seams, it recommends face shields with filters according to DIN EN 379 that darken automatically when the arc is struck. That is the auto-darkening welding helmet. Pay attention to the standard and the adjustable shade range, not the color of the shell.
Hands and body: leather welding gloves according to DIN EN 12477, without rivets or metal clips, plus dry, flame-retardant clothing and shoes with insulating soles. Only change stick electrodes with dry gloves, because the highest voltage is present at idle. That is also in the DGUV publication.
Fumes: in its manual, Fronius points out that welding fumes contain substances that can cause cancer according to IARC Monograph 118. The DGUV brochure „Welding fumes – suitable ventilation measures“ is clear: extraction directly at the source is most effective, and general room ventilation alone is least effective. An open garage door is no substitute for extraction. Grind galvanized and painted parts down to bare metal first; the DGUV advises clean, uncoated surfaces. A cordless angle grinder (in German) with a flap disc is suitable for this.
Sparks: for manual arc welding, the DGUV gives a hazard zone of up to 7.5 m to the side, 4 m upward and 20 m downward. Flammable materials are removed or covered, and a fire extinguisher is kept at hand. Particularly insidious: according to the DGUV, fires can still develop many hours after the work. So do not just switch off the light right after welding; check the room again later.
Five beginner machines side by side
| Machine | Process | Current and duty cycle according to the manufacturer | Best for |
|---|---|---|---|
| STAHLWERK MIG MAG 200 Spot Puls Pro Digital | MIG/MAG with gas, flux-core, stick, lift TIG, pulsed MIG | 20–200 A; 15% at 200 A, 100% at 77.5 A (40 °C); 10.6 kg | Hobby workshop with a gas cylinder, aluminum too |
| Güde Uni-Mig 125 SYN | MIG/MAG, flux-core, stick, TIG (torch optional) | 20–120 A; 15% at 120 A; 7 kg | Small-scale introduction to all processes |
| Güde SG 131 A-SYN | Gasless flux-core | 20–120 A; 10% at 120 A; 6.2 kg | Occasional repairs outdoors |
| Lorch MicorStick 160 BasicPlus | Stick, TIG with contact ignition | up to 160 A; 60% at 120 A, 100% at 110 A; 4.9 kg | Stick welding for the long haul, on the go too |
| Fronius TransPocket 150 | Stick, TIG with torch | 10–150 A; 35% at 150 A, 100% at 90 A; 6.3 kg | Weak circuits, long supply cables |
STAHLWERK MIG MAG 200 Spot Puls Pro Digital
According to the manufacturer, the machine covers MIG/MAG with gas, flux-core, stick and lift TIG, plus a pulse function for aluminum and a spot function for thin car body panels. The wire feed is synergic: you select the material and wire, and the machine suggests the speed. Spools from 0.5 to 5 kg fit inside. A gas cylinder and wire are not included. At 10.6 kg, it is not a case you carry up a ladder but a workshop machine.
Güde Uni-Mig 125 SYN
Four processes in a small housing, also with synergic wire feed. Güde specifies 20 to 120 A for MIG/MAG and 20 to 100 A for electrodes up to 3.2 mm. The duty cycle of 15 percent at maximum current is tight. It only takes plastic spools up to 1 kg, Güde does not list a pressure regulator as included, and the TIG torch is an accessory. It is enough for a first encounter with all the processes, but not for larger projects.
Güde SG 131 A-SYN
A pure flux-core machine for 0.9 mm wire, without a gas cylinder. According to Güde, it regulates the wire feed by itself and is intended for 1.5 to 8 mm material; a small 0.45 kg spool comes in the box. The machine is light and quick to set up. Because of the very high fume emission of the process, we would only use it outdoors or with fume extraction.
Lorch MicorStick 160 BasicPlus
Lorch builds professional machines, and the numbers show it: 110 A in continuous operation, 120 A at a 60 percent duty cycle. It is operated with a single knob, an electrode preselection distinguishes between standard and cellulose electrodes, and TIG works with contact ignition. Electrodes from 1.5 to 4.0 mm are supported. For beginners who weld more than one weekend a year, it is a purchase for many years.
Fronius TransPocket 150
The successor to the TransPocket 1500 is primarily a stick welder for rods up to 4.0 mm, with its own mode for cellulose electrodes. Fronius highlights the power factor correction, which allows long mains supply cables. The adjustable mains fuse setting makes it the machine for older buildings, garden sheds and construction site power. For TIG, it needs a suitable torch.
How we would decide
- Garage with sheet metal, tube, a trailer and room for a gas cylinder: STAHLWERK MIG MAG 200 Spot Puls Pro Digital.
- Getting to know all the processes first while spending little: Güde Uni-Mig 125 SYN, keeping the short duty cycle in mind.
- Only occasionally tacking something outdoors, without gas: Güde SG 131 A-SYN, but not in enclosed rooms without fume extraction.
- Stick as the main process, often on the go: Lorch MicorStick 160 BasicPlus or Fronius TransPocket 150, the latter on circuits with low fuse ratings.
Take a course before you buy. Training centers of the DVS, the German Welding Society, and some community adult education centers in Germany offer beginner courses, often in the evening. There you learn on professional machines which process suits you. After that, you buy with a clearer aim.
Frequently asked questions
Which welding process is suitable for beginners?
That depends on the job. MIG/MAG with shielding gas feeds the wire by itself and is easier on thin sheet metal. Stick welding is more forgiving of wind and rust and suits fences, trailers and construction sites. TIG is the finest process but requires both hands, gas and a lot of practice.
What does the duty cycle of a welder mean?
It refers to a ten-minute cycle: a 60 percent duty cycle means six minutes of welding and four minutes of cooling, each at a specific current. Güde specifies 10 percent at 120 A for the SG 131 A-SYN, meaning one minute of welding and nine of waiting. The current at 60 or 100 percent duty cycle is the meaningful figure.
Can you run a welder from a regular household outlet?
All five machines run on 230 volts with a Schuko plug, and Lorch and Güde specify 16 A circuit protection. On the Fronius TransPocket 150, the existing fuse rating can be set in the menu so the circuit breaker does not trip. If a compressor or fan heater runs on the same circuit, things get tight.
Is gasless flux-core welding a good choice?
It is simple and needs no gas cylinder, but it produces the most smoke. The German DGUV rates flux-core welding as very high in fume emission, and MIG, MAG and stick electrodes as high. A machine like the Güde SG 131 A-SYN therefore belongs outdoors or next to fume extraction.
What protective equipment do you need for welding?
An auto-darkening welding helmet with a filter according to DIN EN 379, leather gloves according to DIN EN 12477, flame-retardant clothing and shoes with insulating soles. Extraction at the source works against fumes; an open garage door is no substitute. Keep a fire extinguisher at hand, because fires can still break out hours later.
Sources
- STAHLWERK: MIG MAG 200 Spot Puls Pro Digital
- Güde: Uni-Mig 125 SYN
- Güde: SG 131 A-SYN
- Lorch: MicorStick series spec sheet (PDF)
- Fronius: TransPocket 150/180 operating instructions
- Fronius: TransPocket 150 and 180
- DGUV Information 209-010 „Arc welding“ (BGHM)
- DGUV Information 209-077 „Welding fumes – suitable ventilation measures“
- BGHM: Occupational safety compact 033 „Manual arc welding“
Where to buy
- STAHLWERK MIG MAG 200 Spot Puls Pro DigitalCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Güde Uni-Mig 125 SYNCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Güde SG 131 A-SYNCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Lorch MicorStick 160 BasicPlusCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Fronius TransPocket 150Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
