Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Buying a Workbench 2026: Folding, Mobile or Fixed?

Workbenches and work tables 2026: folding or fixed, load capacity according to the manufacturer, clamping width and working height. Six models from Bosch to Kreg put into context.

handgetestet editorial team · Updated November 17, 2026
Contents11 sections

This guide was first published in German on handgetestet.de.

When buying a workbench, many people look at load capacity first. A mistake. 450 kilograms sounds professional, but it says little about whether a board can be clamped cleanly or whether the table wanders while you saw. If you have little space and work sometimes in the basement, sometimes in the driveway, a folding clamping table such as the Bosch PWB 600 is usually a better choice than a heavy bench that never gets moved again.

A fixed workbench only pays off once it has its permanent location. There, it stands more steadily than any folding table. Until then, everyday use decides.

First question: does the bench have a fixed location?

If so, a lot speaks for a steel frame and beech top. A bench like that stands more steadily, carries more and takes a vise, drawers and a pegboard. It does, however, permanently take up floor space, often 1.2 to 2 meters in length. And be careful with the load ratings: many listings in stores give contradictory figures for the same model. What counts is the manufacturer’s information, not the headline in the shop.

If not, you end up with a folding table. It is the compromise for the garage, balcony and rented apartment: it clamps workpieces, holds a miter saw and disappears behind the door afterward. For cutting panels with a plunge saw or circular saw, look for a sawhorse mode or a large support surface.

Second question: which number matters for your work?

For load capacity, data sheets often list two values. Worx, for example, gives 135 kilograms for the Pegasus as a table and 450 kilograms as a sawhorse. If you work on the top, go by the smaller one. Static load is also something different from a hammer blow.

Clamping tables have a split top whose halves are cranked together. On the Bosch PWB 600, there are 85 millimeters between the halves, according to retailers. Enough for battens and squared timber. Doors or panel edges call for considerably more, or for additional clamping jaws.

Then the height. Folding tables are usually between 75 and 85 centimeters, which is low for tall people. Among craftspeople, the rule of thumb is that it can be a little lower for sawing and planing and higher for fine work. Of the six models here, only the Wolfcraft MASTER 750 ERGO is adjustable.

Weight and folded size are easy to underestimate. A table you don’t like carrying stays in the basement. At 12 to 14 kilograms, carrying is still easy; nobody hauls 24 kilograms around casually. Finally, hole grids, bench dogs and tables that can be linked turn a folding table into a multifunction table. But that is only useful if the clamps actually get used.

Six workbenches and work tables compared

ModelLoad capacity according to the manufacturerWorking heightClampingFor whom
Bosch PWB 600200 kg83.4 cm (retailer information)split bamboo top, 4 clamping jawsDIYers with little space
Worx Pegasus WX051135 kg as a table, 450 kg as a sawhorsefixedup to 457 mm, 2 quick clamps, 4 clamping dogsPanel cutting, timber construction
Kreg Mobile Project Center158 kg total, 58 kg per table wing80 cmAutomaxx clamp, 4 bench dogsFurniture making with a hole grid
Wolfcraft MASTER 750 ERGO125 kg72.5 to 95 cm, 6 levelsup to 425 mm with clamping jaws, tilting topTall people, machine table
Wolfcraft MASTER 200180 kg80 cm145 mm, 365 mm with clamping jawsBeginners, occasional jobs
Keter Master Proaround 450 kg (listing information)75.5 cm2 clamps of 30 cm eachAssembly, carrying heavy parts

Bosch PWB 600: the solid clamping table

Bosch states a load capacity of 200 kilograms, a bamboo work surface and four clamping jaws for round or bulky parts. At 11.6 kilograms according to the manufacturer, the table remains portable, and folded up it is flat. The height is fixed. Buyers praise its stability, while some are bothered by lateral play under heavy pressure. For typical household jobs, we consider it the most balanced choice of the six.

Worx Pegasus WX051: table and sawhorse in one

A few moves, and the table becomes a sawhorse that then holds 450 kilograms, according to Worx. As a table, it is 135 kilograms. Worx puts the maximum clamping width at 457 millimeters, and two quick clamps and four clamping dogs are included. Several Pegasus tables can be linked together. It is most useful for cutting large panels.

Kreg Mobile Project Center: for furniture makers

Kreg combines a 70 by 80 centimeter work surface with a hole grid, an Automaxx clamp and four bench dogs. According to the manufacturer, each table wing carries 58 kilograms and the whole system 158 kilograms. It weighs just under 24 kilograms itself, more than any other unit here. Just for clamping? Too much effort. For pocket-hole joints and cabinet building, on the other hand, it is well thought out.

Wolfcraft MASTER 750 ERGO: the only one with adjustable height

Six levels between 72.5 and 95 centimeters make this table interesting for tall people. According to Wolfcraft, the top tilts up to 60 degrees, and with clamping jaws, a clamping width of up to 425 millimeters is possible. The trade-off is load capacity: 125 kilograms. It is intended as a base for a miter saw or drill stand. Heavy workpieces belong elsewhere.

Wolfcraft MASTER 200: simple and light

A well-known name among clamping tables for years. According to the specifications, it carries 180 kilograms, and the working height is 80 centimeters. It clamps up to 145 millimeters, and up to 365 with clamping jaws. Sawing battens or sanding a door twice a year? That hardly calls for more.

Keter Master Pro: lots of load, little clamping

The plastic table is listed with a load capacity of around 450 kilograms, and unfolded it measures 91 by 55.5 by 75.5 centimeters. Two 30-centimeter clamps turn the top into a vise. It is light, and weatherproof too. The height of 75.5 centimeters is rather low for many adults, which is why we see it more as an assembly table than as a woodworking bench.

Which table suits which DIYer

  • Typical DIYer: Bosch PWB 600. Stable, portable, solid top. Not height-adjustable.
  • Panel cutting and timber construction outdoors: Worx Pegasus WX051, because it doubles as a sawhorse.
  • Furniture and cabinets: Kreg Mobile Project Center, provided you really use the hole grid.
  • Tall people or machine table: Wolfcraft MASTER 750 ERGO.
  • Occasional jobs: Wolfcraft MASTER 200.

If you have a fixed spot in the workshop, go for a fixed bench with a steel frame and beech top. For winter evenings there, you will find tips in the workshop heater guide.

A table alone does not make a workshop. The next building block for beginners is described in the cordless drill guide.

Frequently asked questions

Folding workbench or fixed workbench: which is better?

If the bench has a fixed location, a lot speaks for a steel frame and beech top: it stands more steadily, carries more and takes a vise and drawers, but permanently takes up floor space. Without a fixed spot, the folding table is the compromise for the garage, balcony and rented apartment.

How much load capacity does a workbench need?

Less than the big numbers suggest. Data sheets often list two values; for the Pegasus, Worx gives 135 kilograms as a table and 450 kilograms as a sawhorse. If you work on the top, go by the smaller one. Static load is also something different from a hammer blow.

What working height should a workbench have?

Folding tables are usually between 75 and 85 centimeters, which is low for tall people. As a rule of thumb, it can be a little lower for sawing and planing and higher for fine work. Among the models compared, only the Wolfcraft MASTER 750 ERGO is adjustable, from 72.5 to 95 centimeters.

Which work table is suitable for cutting panels?

The Worx Pegasus WX051, because in a few moves it turns into a sawhorse that holds 450 kilograms according to Worx. It clamps up to 457 millimeters, and several tables can be linked together. When cutting with a plunge saw or circular saw, make sure you have a large support surface.

How heavy can a mobile work table be?

A table you don't like carrying stays in the basement. At 12 to 14 kilograms, carrying is still easy; nobody hauls 24 kilograms around casually. According to the manufacturer, the Bosch PWB 600 weighs 11.6 kilograms, the Kreg Mobile Project Center just under 24.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.