Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet
This page in 6 more languages

DeutschNederlandsFrançaisItalianoEspañolPolski

Demolition Hammers: Joules, SDS-max, Vibration and Dust Control

Demolition hammers for tiles, screed and concrete: what joule ratings are worth, SDS-max or hex shank, vibration, dust class M and hearing protection.

handgetestet editorial team · Updated November 17, 2026
Scheppach AB1900Image: scheppach (Pressebild)
Contents15 sections

This guide was first published in German on handgetestet.de.

If you want to strip old tiles and adhesive off the bathroom wall or chisel out a door opening, you do not need an 18-kilo brute. An SDS-max chipping hammer weighing 5 to 8 kilograms handles jobs like these, can be held against a wall and fits in a carrying case. For most renovators, we therefore recommend the Makita HM0871C. The heavy hex-shank hammers are better rented for the one time a whole screed or floor slab has to come out.

What do the joules really tell you?

Single impact energy is the number every manufacturer advertises. But it is only comparable if everyone measures the same way. Metabo explicitly labels its figures as measured to the EPTA procedure of the European power tool association. For the 32 joules of the Einhell TE-DH 32 and the 60 joules of the Scheppach AB1900, on the other hand, no measuring method is given.

A look at the weight makes this clear. The Bosch GSH 16-28 weighs 18.3 kg and, according to Bosch, delivers 41 joules, while the 16.5 kg Scheppach AB1900 is rated at 60 joules. That is possible, but without a common measuring method it cannot be verified. We therefore always read the joule rating together with weight and vibration value. Mass cannot be talked up on paper.

SDS-max or hex shank?

The tool holder determines the weight class and the chisels. SDS-max is found on the handy tools up to a little over 10 kg, meaning all models in our table up to and including the Einhell. Hilti calls its holder TE-Y, but it is the same system. SDS-max chisels also fit an SDS-max rotary hammer. If you are more interested in drilling holes than removing tiles, our guide to rotary hammers covers the right combination tools, because a pure chipping hammer does not drill.

Hex is the holder of the heavy class, and this is where a wrong purchase lurks. There are 28 and 30 mm versions, and the chisels are not interchangeable. Bosch even builds the same hammer in both sizes, as the GSH 16-28 and GSH 16-30. So check the model designation before buying chisels, and do the same with a rental tool.

Vibration: the number that affects your hands

Every manufacturer states a vibration emission value for chiseling concrete, determined by a standardized procedure (EN 62841, as stated in the Einhell and Scheppach manuals). For employees, the German Noise and Vibration Occupational Safety Ordinance sets an action value of 2.5 m/s² and an exposure limit of 5 m/s² for hand-arm vibration, each based on eight hours. DIYers are not covered by the ordinance. It still works as a yardstick.

Roughly converting the emission value into working time makes the difference tangible. With the Hilti TE 500-AVR at 8.2 m/s², the limit would be reached after just under three hours of pure chiseling, and with the Makita HM0871C at 11.4 m/s² after a little over an hour and a half. The Einhell at 18.1 m/s² would come to about 37 minutes. On the job site, actual values differ depending on material and posture, as the manufacturers themselves point out. The ranking stays the same, though. Take breaks, let the hammer do the work and do not push down. Einhell writes in its manual that only little contact pressure is needed for chiseling.

Seven demolition hammers and their key specs

ModelHolder, impact energyWeightVibration, chiselingBest for
Makita HM0871CSDS-max, 8.1 J5.6 kg (without cord)11.4 m/s²Renovation, tiles, wall openings
Bosch Professional GSH 5SDS-max, 7.5 J5.5 kg13 m/s²Occasional chiseling on walls
Metabo MHEV 5 BLSDS-max, 8.7 J (EPTA)7.9 kg (without cord)9.6 m/s²Longer jobs, soft materials
Hilti TE 500-AVRSDS-max (TE-Y), 8.5 J6.3 kg (EPTA)8.2 m/s²Trades, daily chiseling
Einhell TE-DH 32SDS-max, 32 J10.3 kg18.1 m/s²Short jobs on the floor
Scheppach AB1900Hex 30 mm, 60 J16.5 kg17.4 m/s² (main handle)One-off demolition on the floor
Bosch Professional GSH 16-28Hex 28 mm, 41 J18.3 kg12.3 m/s²Concrete and asphalt, businesses

All values are manufacturer specifications. For the models that state it, the uncertainty of the vibration values is 1.5 m/s².

Makita HM0871C

Makita combines 8.1 joules with 5.6 kg without cord and has built in anti-vibration technology. For chiseling, Makita states 11.4 m/s². On top of that come soft start and constant-speed electronics designed to hold the speed under load. The impact rate can be set between 1,100 and 2,650 per minute, a real advantage when chipping tiles off old plaster. The cord measures 4 m.

Bosch Professional GSH 5

At 5.5 kg, the Bosch is the lightest hammer in the field. It delivers 7.5 joules at 2,850 blows per minute. The chisel can be rotated into twelve positions, and a locking button allows continuous operation. At 13 m/s², however, it vibrates noticeably more than the Makita and the Metabo. For one weekend a year that is fine; for weeks of renovation, we would reach for one of the other two.

Metabo MHEV 5 BL

Metabo relies on a brushless motor and dual damping from a decoupled handle and a counter-oscillating mass. The result is 9.6 m/s² at 8.7 joules to EPTA. For softer materials, the impact energy can be reduced, soft start and restart protection are on board, and the cord is 6 m long. At 7.9 kg, however, it is more than two kilos heavier than the Makita, and you will feel that when working overhead.

Hilti TE 500-AVR

The lowest vibration figure in the selection comes from Hilti: 8.2 m/s² at 8.5 joules and 6.3 kg, plus 3,510 blows per minute. Hilti names walls as the working direction and offers the TE DRS-B extraction system, which according to the manufacturer captures up to 95 percent of the dust. The power cord is detachable and replaceable. A tool for businesses that chisel every day. If you chip off tiles twice a year, you will hardly take advantage of these benefits.

Einhell TE-DH 32

Einhell states 32 joules at 1,500 watts and 1,900 blows per minute, with a weight of 10.3 kg. A pointed chisel, a flat chisel and a carrying case are included. The main handle is damped, yet the manual states 18.1 m/s² for chiseling. That makes the Einhell a tool for short, powerful jobs working downward, such as a leftover foundation in the garden. It is not made for long hours on a wall.

Scheppach AB1900

The Scheppach works with a 30 mm hex shank, 1,900 watts and, according to the manufacturer, 60 joules. At 16.5 kg, it plays in the class you use on the floor, not on the wall. The manual states 17.4 m/s² at the main handle and 19.5 m/s² at the auxiliary handle. A pointed chisel and a flat chisel of 390 mm are included. For a one-off demolition job at home, it can be an alternative to renting, provided you have room for a 16-kilo hammer afterward.

Bosch Professional GSH 16-28

Bosch supplies this hammer with a trolley, a pointed chisel and a carrying handle. 41 joules, 1,750 watts and 18.3 kg, plus vibration damping that Bosch calls Vibration Control. For chiseling concrete, Bosch states 12.3 m/s², considerably less than Einhell and Scheppach. Pay attention to the 28 mm. If you already own 30 mm chisels, you need the GSH 16-30.

Rent or buy?

A screed in one room, an old patio, a foundation. Jobs like these come up once and call for the heavy class. Here, there is little against renting. Ask the rental shop about the holder, the chisels included and whether an extraction system is available.

Things look different for renovators who keep chipping off tiles, reworking wall chases or cutting wall openings. For them, their own SDS-max hammer in the 5 to 8 kg class makes sense, because it sits ready to hand in the basement and you can guide it on the wall.

Before the first chisel goes in

When chiseling, dust is a bigger risk than the hammer itself. The BG BAU, the German statutory accident insurer for the construction industry, generally classifies dust from mineral building materials as containing quartz and the work as carcinogenic. It recommends tools with extraction connected to a dust extractor of dust class M and, for respiratory protection, preferably a half mask with a P2 filter. Dry sweeping and blowing off with compressed air are explicitly prohibited there. The available masks are covered in our guide to dust masks.

In buildings whose construction began before October 31, 1993, plaster, fillers and tile adhesives may contain asbestos, the BG BAU warns. Have this checked before you start chipping. Also scan the wall for electrical, gas and water lines with a wire and pipe detector, as the manuals require.

And your hearing: Metabo, Einhell and Hilti state sound pressure levels of 93 to 96 dB(A). The upper action value of the ordinance is 85 dB(A). Hearing protection is therefore always part of the job; advice on it is in our guide to hearing protection (in German).

How we would decide

  • Tiles, plaster and wall openings in your own home: Makita HM0871C, light and with adjustable impact rate.
  • Long renovation with many hours at a stretch: Metabo MHEV 5 BL for its low vibration, if the nearly 8 kg do not bother you.
  • Daily chiseling in the trades: Hilti TE 500-AVR with extraction.
  • Only a few hours on a wall now and then: Bosch GSH 5.
  • One-off demolition of screed or a foundation: rent, or the Bosch GSH 16-28 if jobs like these come up regularly.

Frequently asked questions

How meaningful is the joule rating on demolition hammers?

It is only comparable when the same measuring method is used. Metabo labels its figures as EPTA values, while no method is stated for the Einhell TE-DH 32 and Scheppach AB1900. So always read the joules together with weight and vibration value, because mass cannot be talked up on paper.

What is the difference between SDS-max and hex shank?

SDS-max is found on handy tools up to a little over 10 kg, and the chisels also fit SDS-max rotary hammers. Hex is the chuck of the heavy class, in 28 and 30 mm, and the chisels are not interchangeable between the two. So check the model designation before buying chisels.

How long can you work with a demolition hammer?

The German Noise and Vibration Occupational Safety Ordinance sets an exposure limit of 5 m/s² over eight hours for employees. Roughly calculated, it would be reached after just under three hours of pure chiseling with the Hilti TE 500-AVR and after about 37 minutes with the Einhell TE-DH 32. Take breaks and do not push down on the tool.

Should you rent or buy a demolition hammer?

A screed, an old patio or a foundation is a one-off job that calls for the heavy class, so there is little against renting. If you regularly chip off tiles or cut openings in walls, you are better served by your own SDS-max hammer in the 5 to 8 kg class.

How do you protect yourself from dust when chiseling?

The BG BAU (the German statutory accident insurer for the construction industry) classifies dust from mineral building materials as usually containing quartz and the work as carcinogenic. It recommends tools with extraction connected to a dust extractor of dust class M and a half mask with a P2 filter. Dry sweeping and blowing off dust are prohibited.

What should you check before chipping in older buildings?

In buildings whose construction began before October 31, 1993, plaster, fillers and tile adhesives may contain asbestos according to the BG BAU; have that checked beforehand. Also scan the wall with a wire and pipe detector, and always wear hearing protection given noise levels of 93 to 96 dB(A).

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.