Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet
This page in 6 more languages

DeutschNederlandsFrançaisItalianoEspañolPolski

Buying an Electric Planer 2026: Depth, Rebate, Cordless or Corded

Electric planers with 82 mm: what matters with cutting depth, rebate depth, parking shoe and dust extraction, cordless or corded, and seven current models.

handgetestet editorial team · Updated November 17, 2026
Contents14 sections

This guide was first published in German on handgetestet.de.

The new flooring is down, and suddenly the door to the kids‘ room is scraping. Two millimeters too much, nothing more. For exactly this kind of job, a solid 82 mm corded planer such as the Bosch GHO 26-82 D is enough. If, on the other hand, you want to chamfer beams, cut deep rebates or work on the roof without a power outlet, you need more cutting depth or a battery.

Almost all electric planers for DIYers and the trades share the same width. 82 mm is standard. The differences lie elsewhere.

Cutting depth, rebate depth, parking shoe: where the planers differ

Cutting depth tells you the maximum a single pass removes. 2 mm is enough for a sticking door, because you plane it in several thin passes anyway. With rough-sawn beams or when leveling rafters, 3.5 or 4 mm per pass is a real time saver. Bosch itself, however, recommends setting only shallow cutting depths for hardwood at full planing width and feeding more slowly. So plenty of cutting depth is a reserve, not a permanent setting.

Rebate depths vary widely. Many tools manage 9 mm, which is enough for a stop on a trim strip. For shutters or stair treads, more is welcome. Einhell states 25 mm for the TP-PL 18/3 Li BL, Bosch up to 24 mm for the GHO 40-82 C, and Festool even an unlimited rebate depth for the HL 850 EB.

The parking shoe is underrated. It is a flap behind the cutter block that drops down when you set the planer down and keeps the blades away from the workpiece. In the manual for the GHO 40-82 C, Bosch describes how it swings up when you start planing, so after a break you can continue at any point. According to Bosch, this protects both the workpiece and the blade when you set the tool down. A small flap that saves a lot of trouble.

V-grooves in the front sole are used for chamfering beam edges. According to the Bosch manual, the large groove on the GHO 40-82 C produces chamfers of about 5.9 to 11.6 mm. That is plenty for a garden bench or a pergola.

Reversible blades or resharpenable?

All planers in this overview come from the factory with carbide reversible blades or, in Festool’s case, with a spiral cutter. A reversible blade has two cutting edges. Once the first is dull, you flip it over; once the second is worn too, a new one goes in. Bosch states explicitly that these carbide blades must not be resharpened. The advantage: the guide groove sets the blade back to the same height after every change, so no adjustment is needed.

For some tools, HSS blades are also available; Makita, for example, offers one for the KP0800. Resharpenable blades get narrower with every sharpening. For stationary surface planers, the German DGUV Rule 109-606 therefore requires that the minimum clamping width of resharpenable blades is not undercut. For DIYers, resharpening is usually too much hassle. And reclaimed wood with hidden nails damages blades and cutter block anyway, whatever they are made of.

Seven 82 mm electric planers compared

ModelPowerCutting depth / rebate depthSpecial feature according to manufacturerBest for
Bosch GHO 26-82 DCorded, 710 W0–2.6 mm / up to 9 mmChip ejection left or right, 2.8 kgDoors, trim strips, occasional jobs
Bosch GHO 40-82 CCorded, 850 W0–4 mm / 0–24 mmParking shoe, three V-grooves, constant electronicsBeams, rebates, heavy stock removal
Makita KP0800Corded, 620 W0–2.5 mm / 9 mm2.6 kg, 45/50 mm extraction portCompact workshop jobs
Festool HL 850 EB-PlusCorded, 850 W0–3.5 mm / unlimitedSpiral cutter, extraction left or right, 4.2 kgCarpenters and joiners
Festool HLC 82 EB18 V battery, brushless0–2.5 mm / 25 mmParking shoe, cutting depth adjustable while workingPros on site and in installation
Metabo HO 18 LTX 20-8218 V battery0–2 mm / 9 mmRest bracket on the sole, metaBOXUsers of the Metabo battery system
Einhell TP-PL 18/3 Li BL18 V battery, brushless0–3 mm / 25 mmParking shoe, three V-grooves, 2.63 kgDIYers in the Power X-Change system

Bosch GHO 26-82 D

A no-fuss corded planer with 710 W and 2.6 mm cutting depth. You switch the chip ejection to the left or right so the shavings do not fly into your face or onto the freshly painted wall. According to Bosch, a carrying case, parallel guide and dust bag are included. That is enough for doors and window sashes.

Bosch GHO 40-82 C

With 850 W, 4 mm cutting depth and up to 24 mm rebate depth, this is the planer for beams and rough work. According to the manual, a parking shoe and three V-grooves are part of the equipment, and the cutting depth can be read off in tenths of a millimeter. At 3.2 kg, however, it is noticeably heavier, and overhead work quickly becomes tiring.

Makita KP0800

Compact and light. Makita states 620 W, 2.5 mm stock removal and 9 mm rebate depth, and the carbide reversible blade is included. The large 45/50 mm extraction port fits many shop vacuums, which is handy for a planer.

Festool HL 850 EB-Plus

A heavy professional planer with a single-edge spiral cutter and, according to Festool, unlimited rebate depth. 4.2 kg without accessories is a lot. It suits stair building and half-timbered renovation; for that one sticking door, it is oversized.

Festool HLC 82 EB

Brushless motor, spiral cutter, spring-loaded parking shoe and 25 mm rebate depth without a stop. According to Festool, the cutting depth can even be adjusted while planing. The Basic set does not include a battery.

Metabo HO 18 LTX 20-82

With 2 mm cutting depth and a 9 mm rebate, it is the most modest cordless planer here. Metabo lists carbide reversible blades, a bracket on the sole for setting the tool down and a 295 mm long planing sole. Mainly interesting if you already have Metabo batteries on the shelf.

Einhell TP-PL 18/3 Li BL

Surprisingly complete on paper: brushless motor, 3 mm cutting depth, 25 mm rebate depth, automatic parking shoe, three V-grooves and two reversible blades. Einhell recommends batteries from 2.5 Ah. If you already use the Power X-Change system, you get a lot of equipment here without a cord.

Cordless or corded?

A planer works in short passes. That favors a battery, especially on a ladder or on a door that is still hung. Over several meters of beam at 3 mm per pass, however, an 18 V battery drains noticeably. Our rule of thumb: go cordless only if you already own the system. Which platform pays off in the long run is covered in our guide to battery systems. Everyone else works with a corded planer without charging breaks.

Dust extraction and safety: what the manual and the German trade association say

Planing produces shavings, but also fine dust. According to DGUV Information 209-044 from the German statutory accident insurance, hardwood dust, from oak or beech for example, can cause cancer when inhaled. Dust bags do reduce emissions considerably, but according to the same publication they are not sufficient for longer work. A vacuum on the extraction port is better. For the GHO 40-82 C, Bosch recommends a dust class M vacuum.

For handheld planers, the German DGUV Rule 109-606 specifies safety glasses and hearing protection. Rightly so: Bosch states a sound pressure level of 91 dB(A) for the GHO 40-82 C. Four points from the Bosch manual that every newcomer to planing should know:

  • Wait for the cutter block to come to a complete stop before setting the planer down, otherwise it can catch on the surface.
  • Never plane over nails, screws or other metal parts.
  • Secure the workpiece with clamps on a stable base; do not hold it against your body.
  • Do not reach into the chip ejector with your hand, not even when it clogs while running.

To plane a door, take it off its hinges and clamp it firmly. A sturdy workbench with clamping options (in German) makes this much easier. Then smooth the planed edge with a random orbital sander and repaint the bare edge.

How we would decide

  • Sticking doors, trim strips, the occasional board: Bosch GHO 26-82 D.
  • Chamfering beams, deep rebates, renovating an old building: Bosch GHO 40-82 C with parking shoe and 4 mm cutting depth.
  • Already own Einhell batteries: TP-PL 18/3 Li BL, with parking shoe and 25 mm rebate according to the data sheet.
  • Already own Metabo batteries and only light jobs planned: HO 18 LTX 20-82.
  • Joiners and carpenters: Festool HL 850 EB-Plus with a cord or HLC 82 EB with a battery.

Go for the Makita KP0800 if you are looking for a light, compact corded planer and a 9 mm rebate is enough. For occasional jobs, we advise against cordless planers without a matching system. Battery and charger cost extra, and the cutting depth usually stays smaller than with a corded tool.

Frequently asked questions

How much cutting depth does an electric planer need?

For a sticking door, 2 mm is enough, since you plane it in several thin passes anyway. With rough-sawn beams or rafters, 3.5 or 4 mm per pass saves time. For hardwood at full planing width, however, Bosch recommends shallow cutting depths. Plenty of cutting depth is a reserve, not a permanent setting.

What is a parking shoe on an electric planer?

A flap behind the cutter block that drops down when you set the planer down and keeps the blades away from the workpiece. It swings up when you start planing, so after a break you can continue at any point. According to Bosch, this protects both workpiece and blades. The GHO 40-82 C, Festool HLC 82 EB and Einhell TP-PL 18/3 Li BL, for example, have a parking shoe.

Can you resharpen the blades of an electric planer?

Not the carbide reversible blades fitted to most planers; Bosch says so explicitly. A reversible blade has two cutting edges; once the first is dull, you flip it over. The advantage: the guide groove sets the blade to the same height after every change. For some tools, HSS blades are available, but resharpening them is usually too much hassle for DIYers.

Cordless or corded planer: which is better?

A planer works in short passes, which favors a battery on a ladder or on a door that is still hung. Over several meters of beam at 3 mm per pass, however, an 18 V battery drains noticeably. So go cordless only if you already own the system; otherwise a corded planer works without charging breaks.

What safety measures apply when planing?

The German DGUV Rule 109-606 (statutory accident insurance) specifies safety glasses and hearing protection; Bosch states 91 dB(A) for the GHO 40-82 C. Hardwood dust can cause cancer when inhaled, so a vacuum on the extraction port is better than the dust bag. Secure the workpiece with clamps, never plane over metal parts and never reach into the chip ejector.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.