Black Friday week from 19.11.: our pick in each buying guide
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,735 guides and reviews in German How we test
handgetestet

Buying a Home Gym 2026: Space, Weight Stack, Cable Pulley

Buying a home gym station in 2026: ceiling height, weight stack, cable pulley and load capacity. Hammer, Kettler, Sportstech, Bowflex and Gorilla Sports compared.

handgetestet editorial team · Updated November 17, 2026
Contents12 sections

This guide was first published in German on handgetestet.de.

When people send back a home gym station, it is often not because they bought too little weight. The machine simply did not fit under the ceiling. If you have around two meters of free length and want a weight stack, in most cases you end up with the Hammer Kraftstation Ultra (home gym station): 60 kg stack weight, up to 80 kg of resistance, 130 kg load capacity.

If you already have weight plates in the basement or bench training is your main focus, a weight bench station is considerably more flexible.

Step one: the folding rule

The footprint listed in the data sheet only describes the machine at rest. Hammer specifies the Ultra at 167 × 105 × 200 cm but also gives a space requirement of 217 cm in length, because legs and arms reach out during training. The manufacturer requires a minimum ceiling height of 205 cm. For the larger Autark 1500, it is already 220 cm. An older building with a sloped ceiling? Then hold the folding rule up to the lowest point first, where the lat tower is going to stand.

With Bowflex, the gap is even wider.

According to the manual, the Xtreme 2 SE measures 135 × 124 × 208 cm but needs 244 × 198 cm during training. Almost a small children’s bedroom.

Step two: where does the resistance come from?

This is where user types part ways. If you want to switch quickly between exercises without anything falling off, go for a weight stack. Changing the pin takes seconds. What is limited, though, is the upper limit: on the Hammer Ferrum TX2, the 60 kg stack cannot be extended according to the manufacturer, and the same goes for the Sportstech HGX100. If you are already training close to these values today, you will outgrow it quickly. Also pay attention to the ratio. Several manufacturers use pulleys to achieve more resistance than the stack weighs; Hammer, for example, up to 80 kg of resistance with 60 kg of stack weight. Both numbers therefore belong in every comparison.

The situation is different if you already own plates. Then stations such as the Gorilla Sports Kraftstation Universal, which work with loose plates, are enough. Cheaper to buy and open-ended at the top, but changing them over takes time. And then there is Bowflex. Instead of iron, these machines use so-called Power Rods, flexible bending rods. The machine stays lighter, but the resistance feels different from a weight stack.

Step three: reading load capacity correctly

Every manufacturer means something different by it. For stations with a stack, it is usually about the maximum body weight, typically 100 to 130 kg. Weight benches, on the other hand, often combine body weight and additional weight in a single figure. That is how Hammer does it for the Force 4.0 with 180 kg; the barbell rack itself holds 100 kg.

With 95 kg of body weight and 90 kg on the bar, the limit is already exceeded. Plan in some reserve.

Six machines for the home compared

ModelResistanceFootprint / load capacityBest for
Hammer Kraftstation Ultra60 kg stack, up to 80 kg of resistance167 × 105 × 200 cm, max. 130 kg body weightFull-body training with cable pulley, mid-range budget
Kettler Kraftstation Basic5 to 50 kg179 × 116 × 196 cm, max. 100 kgBeginners, lighter people
Sportstech HGX10070 kg stack, not extendable184 × 104 × 203 cm, max. 120 kgBody height 155 to 190 cm
Bowflex Xtreme 2 SE95 kg Power Rods, upgradable to 141 or 186 kg135 × 124 × 208 cm, max. 136 kgMany exercises, without an iron stack
Gorilla Sports Kraftstation UniversalWeight plates, rack up to 180 kg210 × 70 cm base dimensions, total load 280 kgBarbell bench press plus lat pulldown
Hammer Hantelbank Force 4.0Barbell, rack up to 100 kg133 × 70 × 114 cm, foldable, 180 kg incl. body weightLittle space, free weights

Hammer Kraftstation Ultra

Press unit, butterfly, lat pulldown and rowing: the Ultra covers the usual. According to Hammer, the press unit is adjustable, and large holes in the stack are meant to speed up changing the pin. A load capacity of 130 kg is on the high side in this class.

Space, price and reserve are in a sensible balance here, and that is why it comes first.

Kettler Basic

According to Kettler itself, the Basic stays under two square meters of floor space. Upper and lower cable pulleys, chest press with pec fly and leg extension are included. The limits are clear: 50 kg of training weight and 100 kg of body weight. That is enough for people returning to training. Ambitious strength athletes will hit its limits after a few months.

Sportstech HGX100

A 70 kg stack of twelve plates, intended for people between 155 and 190 cm. According to Sportstech, about 20 cm should remain free above the machine so that the lat pulldown bar can be unhooked. For safety reasons, the stack cannot be extended. Sportstech does not offer an assembly service. With a machine weight of 141 kg, you are better off assembling it with two people.

Bowflex Xtreme 2 SE

Nothing has changed in the Bowflex concept for years. Bending rods instead of a weight stack, more than 70 exercises according to the manual, and the rods can be upgraded to a maximum of 186 kg. The Xtreme itself stays compact; the space you need to train, on the other hand, is large. If you expect the classic feel of a weight stack, read user reports beforehand.

Gorilla Sports Kraftstation Universal

Strictly speaking, a weight bench with add-ons. Gorilla Sports specifies the rack at 180 kg, the lat pulldown at 50 kg, each butterfly arm at 40 kg and the leg curl at 60 kg. According to the manufacturer, the lat tower is 195 cm high. Without plates, it is the cheapest station here. Add a complete weight set, however, and the price is no longer far from the Hammer Ultra.

Hammer Hantelbank Force 4.0

Not a home gym station but an incline bench (Hantelbank) with a rack, dip handles and an integrated landmine. What makes it interesting is the folding. Folded, it measures 68 × 70 × 132 cm according to Hammer and disappears behind a door. Bar and plates are not included. For training with free weights, you get a lot of bench on a small footprint.

What type of trainee are you?

  • Full-body training with cable pulley at normal ceiling height: Hammer Kraftstation Ultra.
  • Getting started with light training and under 100 kg of body weight: Kettler Basic.
  • Up to 1.90 m tall and happy with 70 kg of stack weight: Sportstech HGX100.
  • Plates already at hand: Gorilla Sports Kraftstation Universal or Hammer Force 4.0.
  • Many exercises, lots of free space, no iron stack: Bowflex Xtreme 2 SE.

A home gym station does not train endurance. For a combination, a rowing machine is a good option, as it also works the back and arms, or, as a joint-friendly alternative, a cross trainer. If you stick with free weights in a small space, adjustable dumbbells round out the equipment compactly.

If you are starting out with dumbbells at home, our review of the DH FitLife adjustable dumbbells covers a model with a twist grip.

Frequently asked questions

How much space does a home gym station need?

More than its footprint. Hammer specifies the Ultra at 167 × 105 × 200 cm but gives a space requirement of 217 cm in length, because arms and legs reach out. For the Bowflex Xtreme 2 SE, the manual states 244 × 198 cm during training. Also check the ceiling height at the lowest point.

What ceiling height does a home gym station need?

Hammer requires at least 205 cm for the Ultra; for the larger Autark 1500, it is already 220 cm. For the HGX100, Sportstech recommends about 20 cm of clearance above the machine so that the lat pulldown bar can be unhooked. Under a sloped ceiling, measure first where the lat tower is going to stand.

Weight stack or weight plates?

A weight stack allows quick changes with a pin, but the upper limit is fixed. On the Hammer Ferrum TX2 and the Sportstech HGX100, the stack cannot be extended. Stations with loose plates are cheaper and open-ended at the top, but changing them over takes time.

What does load capacity mean for a home gym station and a weight bench?

For stations with a stack, it usually means the maximum body weight, typically 100 to 130 kg. Weight benches often combine body weight and additional weight; for the Hammer Force 4.0, it is 180 kg. With 95 kg of body weight and 90 kg on the bar, that limit is already exceeded.

Why do stack weight and resistance differ?

Several manufacturers use pulleys to achieve more resistance than the stack weighs. For the Ultra, Hammer specifies up to 80 kg of resistance with 60 kg of stack weight. Both numbers therefore belong in every comparison; otherwise a machine seems stronger or weaker than it is.

Which home gym station suits beginners?

For getting started with light training and a body weight under 100 kg, the Kettler Kraftstation Basic with 5 to 50 kg on less than two square meters is a good fit. That is enough for people returning to training. Ambitious strength athletes will hit its limits after a few months.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.