Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Deutsch

Buying an Indoor Sauna: Ceiling Height, 400 V, Heater, Airflow

Buying an indoor sauna: what ceiling height you need, when 230 volts is enough, how large the heater has to be and which basement mistakes get expensive.

handgetestet editorial team · Updated November 17, 2026
Contents12 sections

This guide was first published in German on handgetestet.de.

The basement is free, the cabin is 2 meters tall, and on delivery day the ceiling turns out to be 2.05 meters. You buy an indoor sauna based on the room, not the brochure. With three-phase power and a ceiling height of at least 2.10 m, modular cabins such as the Karibu Kira 1 with 68 mm walls are easy to plan for; with only a 230-volt supply, you are limited to the 3.6 kW class, such as the CHILLROI Dorika. We are not making a top recommendation. We are not aware of any independent test of home saunas by Stiftung Warentest or Öko-Test (German consumer testing organizations) or by a specialist publication with its own measurements. This guide therefore works from the manuals and checks the math.

Get out the tape measure first: ceiling, wall, floor

The weka manual for a solid-wood modular sauna gives clear figures: a minimum ceiling height of 210 cm for assembly, at least 10 cm of clearance from the wall, plus a load-bearing, even and level floor. If in doubt, it allows a deviation of about 10 to 11 mm between the points farthest apart. An older basement with a slope toward the drain quickly fails that test.

Plan the space with some breathing room. A Kira 1 measures 196 × 196 cm on the outside. Placed in a corner with 10 cm of clearance from both walls, it takes up 206 × 206 cm before the door even opens. Also check the way down. The panels have to fit down the basement stairs and through the doors, and at weka, transport to a different floor is not included in the quoted assembly price.

On the floor, the heater is what matters. According to weka, stone or tiles are the most practical; with other floor coverings, a stone slab of at least 40 × 50 cm belongs under the heater. A heater manual from Finnhaus Wolff explicitly rules out wood and plastic under the heater.

Moisture: the room has to cooperate

Weka recommends a dry room that can be ventilated well, and the cabin should cool down with the door open after use. EnBW, a German energy company, lists the bathroom, basement and attic as possible locations and points out the risk of condensation. That makes a basement room without a window the most difficult choice. Take measurements there for a few weeks before you buy; a temperature data logger for the basement (in German) shows how the humidity fluctuates. If it stays high, a dehumidifier will only help to a limited extent if there is no ventilation.

If the cabin goes unused for a longer period, weka recommends heating it for half an hour at least once a month. Surface treatment of the wood is explicitly not permitted there.

Power: what has to reach the back of the cabin

At Karibu, the line is clear: 3.6 kW runs on 230 V, while 4.5 and 9 kW run on 400 V. EnBW describes it similarly but speaks of a normal outlet for 3.6 kW. We would not count on that. Around 16 A for hours is no small load for a circuit shared with a washing machine or space heater, and the manual for the Home Deluxe barrel sauna with the same heater output requires a dedicated circuit and a hardwired connection.

For 400 volts, the Finnhaus manual for a 9 kW combination heater specifies a 5 × 2.5 mm² supply cable, 16 A fusing and a 7 × 1.5 mm² silicone cable from the control unit to the heater. Cables inside the cabin must withstand at least 140 °C, the light may be no more than 40 watts, and an all-pole disconnecting device is also required. All of this is done by a licensed electrician, as the manuals cited require. For cabins built on site and rooms with sauna heaters, the German standard DIN VDE 0100-703 applies.

Some heaters can also be operated on single-phase power. For the 8 kW Kaisa heater, the manual then requires three separate lines from the distribution board. Another note from this manual: no other appliances should run through the heater’s residual current device (RCD).

Running costs are easy to estimate: output times hours times your rate. An evening with 90 minutes of running time comes to at most 5.4 kWh at 3.6 kW, 9 kWh at 6 kW and 13.5 kWh at 9 kW. Once a week, that is around 700 kWh a year in the last case. These are upper limits, because the calculation assumes the heater runs at full power the whole time. If you have a dynamic electricity rate (in German), check whether you can shift your sauna time; everyone else should keep an eye on the installment payments on the electricity bill (in German).

Heater: cubic meters first, then kilowatts

More output is not automatically better. The heater has to match the cabin volume. EnBW gives roughly 1 kW per cubic meter as a rule of thumb, and the manuals specify ranges: at Finnhaus, 4.5 kW for under 7 m³ and 9 kW for 6 to 14 m³, although another passage in the same manual gives 9 to 14 m³. For the 8 kW Kaisa heater, it is around 8 to 12 m³.

Doing the math, assuming an interior height of 2.00 m: with an outside dimension of 196 cm and 68 mm walls, the Kira 1 measures 1.82 × 1.82 m inside, which comes to around 6.6 m³. The smaller Parima 2, at 1.82 × 1.37 m, comes to about 5 m³. Both are offered with a 9 kW heater. That puts the Kira 1 within the first Finnhaus range but below the second, and the Parima 2 below both. These ranges come from a different heater. Have the supplier confirm that the heater and cabin are approved for this volume.

Then there are clearances and airflow. The Finnhaus manual requires 110 cm from the top of the heater to the ceiling and 7 cm to the side, the Kaisa manual 110 and 5 cm. The air inlet sits 5 to 10 cm above the floor under or behind the heater, the outlet diagonally opposite, and both stay open. For the amount of water in a sauna infusion, Finnhaus gives a maximum of 15 g per cubic meter, so about 100 g of water at 6.6 m³. According to the manual, too much water on the stones can cause scalding.

Keep your hands off the smart plug. The Finnhaus manual rules out remote control for its household heater and requires a certified control unit with a safety temperature limiter and a time limit of no more than 6 hours. With the Kaisa heater, remote switching additionally requires a door switch.

Five indoor saunas compared

ModelOutside dimensions as statedHeater and connectionBest for
Karibu Kira 1196 × 196 cm, 68 mm walls9 kW, 400 V, external control unitRooms with three-phase power and around 2 × 2 m of floor space
Karibu Parima 2196 × 151 cm, 68 mm walls9 kW, 400 V, external control unitNarrow rooms, clarify heater approval
Home Deluxe Skyline XL150 × 150 × 200 cmHarvia 6 kW, 400 VTwo to three people, smaller footprint
weka Kaarina 2Dimensions depend on versionHeater sets 4.5 to 7.5 kW, 400 VIf you want to choose the right heater output
CHILLROI DorikaCheck dimensions in the listing3.6 kW, control built into the heaterRooms without three-phase power, clarify connection first

Karibu Kira 1

The 68 mm walls exceed the 40 to 55 mm that EnBW cites for solid-wood saunas. For the larger sibling Farin, the listing mentions 42 mm of mineral wool inside the walls; whether the Kira 1 is built the same way, the specifications do not say. Check whether the control unit is included in the set. Without three-phase power in the room, this model is out.

Karibu Parima 2

With a depth of 151 cm, it fits in rooms where the Kira will not. The heater question from the calculation above remains open. That is for the supplier to clarify, not you.

Home Deluxe Skyline XL

According to the Amazon listing, it comes with a Finnish Harvia heater, 6 kW and 400 V, in hemlock. At 200 cm tall, it leaves little margin in a room with a 2.10 m ceiling. The listing does not clearly state wall thickness or ventilation, so ask for the manual before you buy.

weka Kaarina 2

According to the listing, this modular sauna is available with heater sets between 4.5 and 7.5 kW. That lets you choose the output to match the volume. Our clearance figures come from a weka manual for a different modular sauna. The figures for your exact version are in its documentation.

CHILLROI Dorika

According to the listing, it comes with a 3.6 kW heater and integrated control. At Karibu, this output class runs on 230 V; we did not have a manual for the Dorika itself. Get the connection, ventilation and wall thickness in writing.

How we would decide

  • Ceiling under 2.10 m: request the manual for the model you want first. Without documented approval, we would not order.
  • Three-phase power in the room: Karibu Kira 1 or Skyline XL, depending on floor space.
  • Only 230 volts and a small budget for the electrician: the 3.6 kW class such as the CHILLROI Dorika, without skipping the dedicated circuit.
  • Narrow room: Parima 2, but only after the heater approval has been confirmed.
  • Unsure about output: weka Kaarina 2, because the heater sets leave some leeway.

We make no health claims. For people with health conditions, children and older people, the Finnhaus manual advises consulting a doctor about temperature and duration.

If you are looking for gentle warmth instead of infusions and do not want to run high-voltage power, you can compare emitters, sizes and wood in our guide to the infrared cabin (in German).

Frequently asked questions

What ceiling height does an indoor sauna need?

The weka manual specifies a minimum ceiling height of 210 cm for assembly and at least 10 cm of clearance from the wall, plus a load-bearing, even and level floor. A Kira 1 measuring 196 × 196 cm therefore takes up 206 × 206 cm in a corner. Also check whether the panels will fit down the basement stairs and through the doors.

Can you plug a sauna into a regular outlet?

We would not count on it. At Karibu, 3.6 kW runs on 230 V, while 4.5 and 9 kW need 400 V. Around 16 A for hours is no small load for a shared circuit, and one manual for the same heater output requires a dedicated circuit and a hardwired connection. That is a job for a licensed electrician.

How much electricity does an indoor sauna use?

Multiply output by hours by your rate. An evening with 90 minutes of running time comes to at most 5.4 kWh at 3.6 kW, 9 kWh at 6 kW and 13.5 kWh at 9 kW. Once a week, that is around 700 kWh a year in the last case. These are upper limits, because the heater does not run at full power the whole time.

How many kilowatts does the sauna heater need?

The heater has to match the cabin volume; more is not automatically better. EnBW cites roughly 1 kW per cubic meter. The Kira 1 has around 6.6 m³ inside, the Parima 2 about 5 m³, and both are offered with a 9 kW heater. Have the supplier confirm that the heater is approved for this volume.

Is a basement suitable for a sauna?

Only if the room is dry and can be ventilated well. A basement room without a window is the most difficult choice. Measure the humidity for a few weeks with a data logger before you buy. If it stays high, a dehumidifier will only help to a limited extent if there is no ventilation.

Can you switch on a sauna with a smart plug?

No. The Finnhaus manual rules out remote control for its household heater and requires a certified control unit with a safety temperature limiter and a time limit of no more than 6 hours. With the Kaisa heater, remote switching additionally requires a door switch.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.