Contents10 sections
This guide was first published in German on handgetestet.de.
A red and yellow handle, a red blade, and that makes a screwdriver an electrician’s tool? It is not that simple. Only tools bearing the double triangle with the 1000 V marking and tested piece by piece to IEC 60900 count as insulated in the sense of the standard. If you are shopping for a set today, the Wera 160 iSS/7 gives you a smart basic kit for distribution boards and switch boxes; for pliers, the three-piece Elektro-Paket from Knipex is the obvious complement.
What a VDE tool has to do and what it does not
The IEC 60900 standard (in Germany DIN EN 60900, VDE 0682-201) covers hand tools for work on or near live parts up to 1,000 volts AC. Wera and Wiha state that they test every single tool; Wera specifies an individual test in a water bath at 10,000 volts. The tenfold safety margin is intentional.
The German statutory accident insurance institution for the energy, textile, electrical and media products sectors (BG ETEM) puts it unambiguously in its brochure „Sicherheit zum Nachschlagen Elektrotechnik“ (a safety reference for electrical engineering): tools with plastic handles but without the marking are not insulated tools. So the colorful handle of an ordinary screwdriver offers no protection. BG ETEM also requires insulated tools to be inspected for damage before every use, to be stored separately from other tools where possible, and damaged pieces to be taken out of use. A nick in the blade insulation, for example from slipping on a sheet-metal edge, turns the professional tool into an ordinary screwdriver.
Four questions help you choose:
- Which screws will you encounter? Terminal blocks, circuit breakers and many outlets use combination heads that combine a slot with Pozidriv or Phillips. There are dedicated PlusMinus blades for these; a plain Phillips blade slips out more easily there.
- How tight will it get? With deep-set terminals, the diameter of the insulated blade matters. That is why Wera and Wiha offer slim versions with thinner insulation.
- Do you need pliers? A screwdriver-only set is enough for terminals and switches. If you shorten cables and bend wires, you also need combination pliers, diagonal cutters and snipe-nose pliers.
- Is a phase tester included? Then please do not treat it as a measuring instrument (more on this below).
Who is actually allowed to work on a home’s electrical installation?
A VDE set is no substitute for training. Under Section 13 of the German Low Voltage Connection Ordinance (Niederspannungsanschlussverordnung, NAV), installations beyond the main service fuse may, apart from the grid operator, only be built, extended or modified by a company listed in a grid operator’s register of installers. In commercial settings, the German accident prevention regulation DGUV Vorschrift 3 applies. Under it, electrical installations may only be built, modified and maintained by a qualified electrician or under their direction and supervision.
Even for professionals, insulation is only the second line of defense. The first is the five safety rules from DIN VDE 0105-100: disconnect, secure against reconnection, verify the absence of voltage, earth and short-circuit, and cover adjacent live parts. According to BG ETEM, live working generally requires special training, documented with a dedicated certificate. According to the brochure, laypeople may, for example, replace fuse links in low-voltage installations with protection against direct contact, and likewise lamps, provided the installation is fully protected against contact. It does not go much further than that.
To verify the absence of voltage, BG ETEM specifies two-pole voltage testers according to VDE 0682-401. The single-pole phase tester included in some sets does not fall into this category. If you want to take measurements, you will find suitable instruments in our guide to multimeters, although even a good multimeter does not replace a two-pole voltage tester in the electrical trade.
Five sets and their key specs
| Set | Contents according to the manufacturer | Special feature | Best for |
|---|---|---|---|
| Wera 160 iSS/7 | 3 × slotted, PH 1 and PH 2, PlusMinus PZ/S 1 and 2 | Slim blades and handles, 434 g | Distribution boards, terminal blocks, tight boxes |
| Wiha SoftFinish electric slimFix 35389 | Slotted 3.5 to 6.5 mm, PH 1 and PH 2 | Blade up to 33% slimmer according to Wiha | Deep switch boxes, no need for PlusMinus |
| Gedore VDE 2170-2160 PH-077 | Slotted 2.5 to 6.5 mm, PH 0, 1 and 2 | The only set here with PH 0 | Classic basic kit |
| Wera 160 i/7 Rack | 4 × slotted, PH 1 and PH 2, single-pole phase tester | Wall holder, standard blade thickness | Workshop wall, fixed places |
| Knipex 00 20 12 Elektro-Paket | Combination pliers 180 mm, snipe-nose pliers 200 mm, diagonal cutters 160 mm | All three pliers VDE-tested up to 1000 V | Complement to any screwdriver set |
Wera 160 iSS/7
In this set, not only are the blades thinner, some of the handles are smaller too. According to the data sheet, this brings deep-set screw and spring terminals within reach. For us, the mix is what tips the balance: alongside three slotted blades (up to 1 × 5.5 × 125 mm) and Phillips 1 and 2, there are two PlusMinus blades for the combination heads on terminal blocks, switches and relays. Wera also specifies tested cold impact resistance at minus 40 °C. A large slotted blade for heavy-duty screws is missing.
Wiha SoftFinish electric slimFix 35389
With Wiha, the insulation is integrated directly into the blade, which according to the manufacturer makes it up to 33 percent slimmer than conventionally insulated blades. The set includes four slotted sizes from 3.5 to 6.5 mm, the longest 150 mm long, plus Phillips 1 and 2. Every tool is individually tested to IEC 60900 and approved for 1,000 volts AC. This set does not contain PlusMinus blades; Wiha offers separate slimFix sets for those.
Gedore VDE 2170-2160 PH-077
Gedore sticks to the classic layout: four slotted blades from 2.5 to 6.5 mm and three Phillips from PH 0 to PH 2. The small PH 0 is missing from the other sets in this overview. The handles are made of three components, and the weight is 0.6 kg. The blades have the usual thickness. In very tight boxes that is a disadvantage; with larger screws it is an advantage.
Wera 160 i/7 Rack
This set comes with a holder that can be screwed to the wall. It contains four slotted blades from 2.5 to 5.5 mm, Phillips 1 and 2, and a single-pole phase tester. We would see the tester more as an add-on. If you already own a two-pole voltage tester, you are better off with the 160 iSS/7 and its PlusMinus blades.
Knipex 00 20 12 Elektro-Paket
Three pliers, all tested to DIN EN/IEC 60900 up to 1,000 volts. According to Knipex, the 03 06 180 combination pliers cut stranded copper cable up to 16 mm² and hard wire up to 2.2 mm. The 70 06 160 diagonal cutters have a slim head and cutting edges of around 61 HRC, and the 200 mm snipe-nose pliers reach into boxes and bend loops. Together the set weighs 960 g. A wire stripper is not included; our guide to plier sets and our guide to crimping tools show which designs are available.
How we would decide
- Qualified electrician working on distribution boards and terminal blocks: Wera 160 iSS/7, complemented by the Knipex Elektro-Paket.
- Very deep switch boxes, hardly any combination screws: Wiha slimFix 35389.
- Small Phillips screws on appliances and light fixtures: Gedore VDE 2170-2160 PH-077 because of the PH 0.
- A fixed place on the workshop wall: Wera 160 i/7 Rack, but do not use the phase tester to verify the absence of voltage.
And if you just want to connect a new ceiling light at home? The set does not make the job any safer if the five rules are missing. In that case, we would call in a registered electrical contractor. Incidentally, cheap sets with a red handle and no double triangle are no alternative for professionals either.
How to make permanently waterproof cable connections in the garden or underground is explained in our guide to outdoor cable connectors (in German).
Frequently asked questions
How do you recognize genuine VDE tools?
By the double triangle with the 1000 V marking. A colorful plastic handle alone is not enough: according to the German statutory accident insurer BG ETEM, tools with plastic handles but without the marking are not insulated tools. Wera and Wiha state that they test every single tool.
How long does an insulated screwdriver stay safe?
Only as long as the insulation is undamaged. BG ETEM requires a visual inspection before every use and separate storage. A nick in the blade insulation, for example from slipping on a sheet-metal edge, turns the professional tool into an ordinary screwdriver. Stop using damaged pieces.
What are PlusMinus blades for?
Terminal blocks, circuit breakers and many outlets use combination heads that combine a slot with Pozidriv or Phillips. A plain Phillips blade slips out more easily there. The Wera 160 iSS/7 contains two such blades, whereas the Wiha slimFix 35389 has none.
May I work on my home's electrical installation myself with VDE tools?
No, a VDE set is no substitute for training. Under Section 13 of the German Low Voltage Connection Ordinance (Niederspannungsanschlussverordnung), installations beyond the main service fuse may only be built or modified by companies listed in a grid operator's register of installers. Even for a new ceiling light, we would call in a registered electrical contractor.
Does a phase tester replace a voltage tester?
No. To verify the absence of voltage, BG ETEM specifies two-pole voltage testers according to VDE 0682-401. The single-pole phase tester included in some sets, such as the Wera 160 i/7 Rack, does not fall into this category and is more of an add-on.
Which pliers belong in a VDE kit?
If you shorten cables and bend wires, you need combination pliers, diagonal cutters and snipe-nose pliers. The Knipex 00 20 12 Elektro-Paket contains all three, tested to DIN EN/IEC 60900 up to 1,000 volts. A wire stripper is not included.
Sources
- Wera: 160 iSS/7 data sheet (05135961001)
- Wera: 160 i/7 Rack data sheet (05006147001)
- Wiha: SoftFinish electric slimFix 35389 screwdriver set
- Gedore: VDE 2170-2160 PH-077, 7-piece VDE screwdriver set
- Knipex: Product information 00 20 12 Elektro-Paket
- Knipex: Product information 03 06 180 combination pliers
- Knipex: Product information 70 06 160 diagonal cutters
- BG ETEM: Sicherheit zum Nachschlagen Elektrotechnik (March 2022 edition)
- German Low Voltage Connection Ordinance (Niederspannungsanschlussverordnung), Section 13
Where to buy
- Wera 160 iSS/7Check price at Amazon.deAvailable in Germany: Amazon.de
- Wiha SoftFinish electric slimFix 35389Check price at Amazon.deAvailable in Germany: Amazon.de
- Gedore VDE 2170-2160 PH-077Check price at Amazon.deAvailable in Germany: Amazon.de
- Wera 160 i/7 RackCheck price at Amazon.deAvailable in Germany: Amazon.de
- Knipex 00 20 12 Elektro-PaketCheck price at Amazon.deAvailable in Germany: Amazon.de
