Contents10 sections
This guide was first published in German on handgetestet.de.
A chipboard panel, two trestles, and your cutting station in the driveway is ready. It is only that simple if the trestles suit the job. For boards, planks and a makeshift work surface, we recommend a pair with telescopic legs such as the Stanley FatMax 1-92-980; for firewood, on the other hand, you need a real sawhorse with a rest for logs.
The two terms are often mixed up. A trestle carries whatever lies on top. A sawhorse for the chainsaw holds round logs in place so they do not roll during the cut. If you confuse the two, come fall you will be standing there with a folding trestle on which no meter-long log stays put.
Load capacity, height, folded size: what each number stands for
With trestles, you see load capacity figures of more than a ton. Stanley states 1,135 kilograms for its FatMax pair, Keter 1,360 kilograms for the Lumberjack. Add up the panel, machine and workpiece. For woodworking around the house, that stays far below such values, so the ton is a reserve and not a reason to buy. More interesting is how steady the trestle stands when someone pushes sideways against the workpiece.
- Height: Individually adjustable legs compensate for slopes in a yard or garage. Fixed trestles only stand level on even ground.
- Rest: A groove or a wooden beam on top holds boards, pipes or a panel. Plastic pads protect painted doors.
- Folded size: Folded, the wolfcraft workstand is 6 centimeters thick and fits behind any door. A firewood sawhorse, by contrast, stays more than a meter tall.
- Pair or single unit: The Stanley comes as a pair. With the other models, check before buying whether one trestle or two are supplied. For a work surface you always need two.
A sample calculation on height. A miter saw on a 2.5-centimeter panel over 80-centimeter trestles ends up at a support height of around 83 centimeters, with the saw table considerably higher again. Whether that suits your height is best tried out at your own workbench. Then the upper value of the adjustment range is what counts.
Five trestles, five jobs
Stanley FatMax 1-92-980: the pair for cutting
Two trestles in one pack, telescopic metal legs, each leg extendable on its own. According to Stanley, the two together carry 1,135 kilograms. At the bottom there is a tray for tools, at the top a groove in which wooden beams or pipes stay put. With a panel laid on top, you get a work surface that folds flat and leans in the corner once the job is done. Stanley does not state an exact adjustment range on the product page. So measure after unpacking whether the height you want can be reached.
Keter ROC Lumberjack: ratchet instead of locking pins
Keter adjusts the metal legs via a ratchet between 31 and 39 inches, which is about 79 to 99 centimeters. On top sits a 2 x 4 inch wooden beam, so boards do not rest directly on metal. According to the manufacturer, the lower tray carries 23 kilograms, and the trestle itself weighs 7.2 kilograms. Keter lists it as not weatherproof. So if you leave it standing in the carport, you are giving away service life. For a panel you need two of them.
wolfcraft workstand: light and gentle on surfaces
A different tool. The workstand carries 100 kilograms at a fixed working height of 73.5 centimeters and a support width of 62 centimeters. Three adjustable plastic rests and side stops hold door leaves, packs of laminate or shelf boards without leaving scratches. Folded, it is 6 centimeters flat. It is not intended for heavy planks, but when painting interior doors it is more pleasant to use than a steel trestle.
wolfcraft Multifunktionsbock: the third arm at the saw
This stand (the name means multifunction stand) does not carry a panel. It supports the end of long workpieces as they run out of a circular saw or table saw. According to wolfcraft, the height can be adjusted continuously between 63 and 100 centimeters. Turning it by 90 degrees switches the rest between balls, roller and a fixed surface. 50 kilograms is not much. That is why it is no good for a work surface, but it is for a three-meter-long board.
wolfcraft Sägebock 5121000: for firewood only
Here, round logs lie between tube brackets made of 26-millimeter steel tubing. According to wolfcraft, logs from 50 centimeters to one meter in length fit in, and saw marks at 25 and 33 centimeters show where the chain goes in. Beech boards are meant to protect the chain in the event of a miscut, and an ejection guard is meant to stop the wood from kicking back. The sawhorse (Sägebock) can bear 150 kilograms. It is built for cutting meter-long logs into stove-ready pieces with a cordless chainsaw. Not for anything else.
Sawing safely at the sawhorse
For work with a chainsaw, the Sozialversicherung für Landwirtschaft, Forsten und Gartenbau (SVLFG), the German social insurance for agriculture, forestry and horticulture, lists cut-protection trousers, safety shoes with cut-protection inserts, a helmet with face protection, gloves and, from 85 dB(A), hearing protection. The saw belongs in both hands, and you should not saw with the tip of the bar, because it leads to kickback. If you are standing alone in the garden, you should reconsider. The SVLFG rules out working alone with a chainsaw as a matter of principle. For occasionally cutting construction timber to length, it permits cut-protection leg guards and gaiters instead of trousers and boots.
How we would decide
- Cutting in the garage or driveway, now and then a work surface: the Stanley pair.
- Heavy beams, a sloping yard, frequently changing heights: two Keter Lumberjack.
- Renovating in the apartment, painting doors and panels: one or two wolfcraft workstand.
- Long boards at the saw: a Multifunktionsbock in addition.
- Firewood: the wolfcraft Sägebock, not the trestle.
If you are looking for a surface with clamping jaws and built-in clamping, you are more likely to end up with a folding clamping table. Our guide to workbenches and clamping tables (in German) explains the differences.
Frequently asked questions
What is the difference between a trestle and a sawhorse for firewood?
A trestle carries whatever lies on top, such as boards or a panel. A sawhorse for the chainsaw holds round logs in place so they do not roll during the cut. A meter-long log will not stay put on a folding trestle, so for firewood you need the second kind.
How much load capacity does a trestle need?
Less than the boxes promise. Add up the panel, machine and workpiece; for woodworking around the house, that stays far below claims of more than a ton. More interesting is how steady the trestle stands when someone pushes sideways against the workpiece.
What should you look for when buying trestles?
Individually adjustable legs compensate for slopes in a yard or garage. A groove or a wooden beam on top holds boards, pipes or a panel. Check whether one trestle or two are supplied, because for a work surface you always need two.
Which trestle is suitable for painting doors?
The wolfcraft workstand carries 100 kilograms at a fixed height of 73.5 centimeters. Three adjustable plastic rests and side stops hold door leaves or shelf boards without scratches. Folded, it is 6 centimeters flat, but it is not intended for heavy planks.
How do I support long boards at the saw?
With a roller stand such as the wolfcraft Multifunktionsbock. It supports the end of long workpieces running out of the circular saw and can be adjusted continuously between 63 and 100 centimeters. With a load capacity of 50 kilograms, it is not suitable for a work surface.
What protective equipment do I need for sawing at a sawhorse?
For the chainsaw, the SVLFG (German social insurance for agriculture, forestry and horticulture) lists cut-protection trousers, safety shoes with cut-protection inserts, a helmet with face protection, gloves and, from 85 dB(A), hearing protection. The saw belongs in both hands, and you do not saw with the tip of the bar. The SVLFG rules out working alone with a chainsaw as a matter of principle.
Sources
- Stanley: FatMax Sawhorse Pair 1-92-980
- Keter: ROC Lumberjack
- wolfcraft: Auflagebock workstand (support stand)
- wolfcraft: Multifunktionsbock
- wolfcraft: Sägebock 5121000
- SVLFG: Topic booklet on chainsaw hazards
Where to buy
- Stanley FatMax Teleskop-Unterstellbock 1-92-980 (Paar)Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Keter ROC Lumberjack SägebockCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- wolfcraft Auflagebock workstand 6905000Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- wolfcraft Multifunktionsbock 6102300Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- wolfcraft Sägebock 5121000Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
Still undecided?
Keep comparing at your own pace – every article in this category is checked monthly for new and discontinued models.






