Contents13 sections
This guide was first published in German on handgetestet.de.
An air tool set rarely fails because of the blow gun. It fails because of the impact wrench, which demands more air than the compressor can keep supplying. For tires, blowing out and occasionally painting small parts, we recommend a solid basic set such as the Metabo LPZ 4 Set; only buy an impact wrench once you know your compressor’s delivered air volume.
Which compressor suits which workshop is covered in our workshop compressor guide (in German). Here, it is about what hangs on the front end of the hose.
The number on the compressor and the number on the tool
Every air tool states two values: the working pressure in bar and the air consumption in liters per minute. Pressure is rarely the problem. The impact wrenches further down work at 6.2 to 6.3 bar, and a compressor with a maximum pressure of 8 bar has a reserve there. What matters is the volume.
An example using manufacturer data. Einhell states an intake capacity of 270 l/min for the TE-AC 270/50 Silent Plus compressor. According to the data sheet, it delivers 132 l/min at 4 bar and still 93 l/min at 7 bar. According to the manufacturer, the Metabo DSSW 360 impact wrench needs 6 liters per second, or 360 l/min at 6.2 bar. That is just under four times what the compressor pushes out in this pressure range.
Even so, pairings like this do loosen wheel nuts. The tank acts as a buffer. As a rough estimate, a 50-liter tank holds around 100 liters of expanded air between 8 and 6 bar, which is enough for short bursts of impacts on one wheel. After that, you have to wait until the motor has refilled it. Anyone who changes four wheels in a row knows these pauses. If, on the other hand, you paint a surface in one go, you notice it in the spray pattern, because the pressure drops and the paint atomizes more coarsely.
Our rule of thumb is therefore: a blow gun and tire inflator run on any compressor. A spray gun and impact wrench call for a look at the data sheet, specifically at the delivered air volume at working pressure, not at the intake capacity.
What the individual tools can and cannot do
The blow gun is the least demanding part. Einhell states 3 to 8 bar for the gun in its own set. It cleans the workbench, drill holes and filters.
With the tire inflator, readability is what counts. Einhell openly writes in the manual that the set’s tire inflator gauge is not calibrated and advises checking the pressure at a gas station afterward. For a car, that is sensible advice. If you fill tires daily or tow trailers with tight specifications, buy a calibrated standalone device as well.
The spray gun in the set is intended for garden chairs, railings and primers. For car paint or large furniture surfaces, a dedicated HVLP gun is worth it. HVLP stands for high volume, low pressure. Metabo states 2 bar and 170 l/min for its FSP 600 HVLP, while the standard version of the same gun needs 4.5 bar and 240 l/min. According to the manufacturer, lower pressure means less overspray, but the air consumption remains high.
The impact wrench is the thirstiest tool. It loosens stuck wheel nuts, but it does not replace a torque wrench. Einhell explicitly writes in the manual for the TC-PW 340 that the wrench is only intended for loosening; tighten wheel nuts with a torque wrench (in German) to the value specified by the vehicle manufacturer.
Seven air tools with manufacturer data
| Model | Contents | Pressure and air consumption according to manufacturer | Best for |
|---|---|---|---|
| Metabo LPZ 4 Set | Blow gun, tire inflator, 0.6 l spray gun, 4.9 m coiled hose | EURO plug nipple 1/4″; Metabo does not state pressure values | Basic equipment for the garage and hobby basement |
| Einhell Druckluftset Profi 5-tlg. | Blow gun, sprayer and paint spray gun, tire inflator gauge, 4 m hose | up to 8 bar; spray gun 3 to 4 bar | Beginners with an 8-bar compressor |
| Güde Druckluft-Set 3-tlg. Metall | Tire inflator, blow gun, 5 m coiled hose | up to 10 bar, 1/4″ thread | Tires and blowing out only |
| Metabo FSP 600 HVLP | Paint spray gun, 0.6 l gravity-feed cup, 1.3 mm nozzle | 2 bar, 170 l/min | Painting with a 50-liter compressor |
| Einhell TC-PW 340 | 1/2″ impact wrench, 8 sockets | 6.3 bar, 142 l/min, 340 Nm | Tire changes on a car |
| Scheppach Druckluft-Schlagschrauber-Set | 1/2″ impact wrench, sockets, oiler | 6.3 bar, 141 l/min, 310 Nm | Tire changes, if you lack an oiler |
| Metabo DSSW 360 Set 1/2″ | Impact wrench, 10 sockets, extension, case | 6.2 bar, 360 l/min, 410 Nm, breakaway torque 630 Nm | Rusty connections, large compressor |
A note on the table: the air consumption values of the impact wrenches come from manuals and data sheets from different manufacturers. Whether they were all measured the same way is not clear from them. The gap between 142 and 360 l/min is still too large to ignore.
Metabo LPZ 4 Set
A blow gun with a die-cast aluminum housing, a tire inflator and gauge, and a paint spray gun with a 0.6-liter gravity-feed cup and infinitely adjustable round and flat spray pattern. Added to that is a 4.9-meter PA coiled hose with a quick coupling. Metabo sells the set with a EURO plug nipple and as separate variants with ISO or ARO nipples. Check which system your compressor uses before you buy.
Einhell Druckluftset Profi 5-tlg.
The Einhell set also includes a sprayer gun with a suction cup for cold cleaner and spray oil. With an inner diameter of 6 mm, the hose is thin and rated for no more than 8 bar. That is enough for blowing out and tires. Einhell itself calls the tire inflator gauge uncalibrated.
Güde Druckluft-Set 3-tlg. Metall
Few parts, but metal: a tire inflator and blow gun with aluminum housings, and a 5-meter PE coiled hose with kink protection. Güde states 10 bar as the maximum pressure, which also suits 10-bar compressors. A spray gun is missing. If you never paint, you will not miss it.
Metabo FSP 600 HVLP
The gun for anyone who wants more than the set gun. The nozzle set is made of stainless steel and, according to Metabo, suitable for water-based and solvent-based materials; the manufacturer states a transfer efficiency of about 70 percent. At 170 l/min, the demand is above what the Einhell compressor mentioned above delivers at 4 bar. A door in stages, yes; a whole car in one go, probably not.
Einhell TC-PW 340
340 Nm of loosening and tightening torque, 1/2-inch square drive, 142 l/min according to the manual. Einhell recommends a hose with a 9 mm diameter and warns that hoses that are too thin or too long cost power. The 6 mm hose from the Einhell set is therefore the wrong line for this wrench. The oil bottle comes empty; you buy air tool oil separately.
Scheppach Druckluft-Schlagschrauber-Set
At 310 Nm, somewhat weaker than the Einhell, with almost the same air consumption. The difference lies in the accessories: Scheppach includes an oiler and machine oil. In the manual, the manufacturer requires filtered, condensate-free and oiled air and a compressor with a tank of at least 50 liters. That is a clear statement we would like to read from other manufacturers too.
Metabo DSSW 360 Set 1/2″
Metabo states up to 410 Nm of tightening torque and 630 Nm of breakaway torque. The case contains ten sockets from 10 to 27 mm, an extension and no fewer than three plug nipples. If you work with a small compressor, you get little out of it: 360 l/min is a job for large oil-lubricated machines. On rusted-on nuts of old trailers, the Metabo plays out its reserve.
Hearing, eyes, skin: what manuals and authorities say
Impact wrenches are loud. Einhell states a sound pressure level of 99 dB(A) for the TC-PW 340, Metabo 97 dB(A) for the DSSW 360, and Scheppach 94 dB(A). Einhell and Scheppach require hearing protection in their manuals. For comparison: the German Noise and Vibration Occupational Safety Ordinance sets the upper exposure action value for daily exposure at 85 dB(A). Suitable earmuffs and earplugs can be found in the hearing protection guide.
Safety glasses belong with the blow gun, because chips fly. Blowing off clothing and skin is off-limits. The North Rhine-Westphalia State Office for Health and Occupational Safety refers to a brochure from the German statutory accident insurers VBG and DGUV and states that blowing off skin or clothing must be avoided regardless of the pressure setting.
For painting, Einhell sets clear limits in the set’s manual. No paints with a flash point below 55 °C, no open flames, no machines that throw sparks. The room should be larger than 30 cubic meters and well ventilated. For harmful substances, the manufacturer requires respiratory protection with a filter. A single garage with the door open meets these requirements more readily than a basement room with a tilt window.
How we would decide
- Tires, blowing out, the occasional garden chair: Metabo LPZ 4 Set.
- Only tires and the workbench, 10-bar compressor: Güde Druckluft-Set 3-tlg. Metall.
- Getting started with a sprayer gun for cleaners: Einhell Druckluftset Profi, then check the tire pressure afterward.
- Painting with high standards: Metabo FSP 600 HVLP, but only with a powerful compressor and a filter pressure regulator.
- Changing tires twice a year: Einhell TC-PW 340 or the Scheppach set, on a 50-liter compressor with a 9 mm hose.
- Rusted-on parts and commercial vehicles: Metabo DSSW 360, provided the compressor has enough air for it.
One last piece of advice from the manuals. Einhell requires three to five drops of air tool oil in the connector before each use, and five to ten after a break of several days. Scheppach wants filtered, condensate-free air. Both take a minute. So keep the manual instead of throwing it away with the box.
Frequently asked questions
Is my compressor enough for an air impact wrench?
What matters is the delivered air volume at working pressure, not the intake capacity. According to Einhell, a compressor with an intake capacity of 270 l/min still delivers 93 l/min at 7 bar, while the Metabo DSSW 360 needs 360 l/min. The tank buffers short bursts of impacts; after that, you have to wait.
What do bar and liters per minute mean for air tools?
Every tool states its working pressure in bar and its air consumption in liters per minute. Pressure is rarely the problem; the impact wrenches in the comparison work at 6.2 to 6.3 bar. What matters is the volume the compressor can keep supplying.
Can I tighten wheel nuts with an air impact wrench?
Not for final tightening. Einhell writes in the manual for the TC-PW 340 that the wrench is only intended for loosening. Tighten wheel nuts with a torque wrench to the value specified by the vehicle manufacturer. Pay attention to the hose as well; Einhell recommends a 9 mm diameter.
Is an HVLP spray gun worth it?
For car paint or large furniture surfaces, yes; the gun included in sets is meant more for garden chairs and primers. The Metabo FSP 600 HVLP works at 2 bar and, according to the manufacturer, produces less overspray, but it needs 170 l/min. That requires a powerful compressor with a filter pressure regulator.
How accurate is the tire inflator in an air tool set?
Einhell openly writes that the tire inflator gauge in its set is not calibrated and advises checking the pressure at a gas station afterward. If you fill tires daily or tow trailers with tight specifications, buy a calibrated standalone device as well.
What protective equipment do I need for air tools?
According to the manufacturers, impact wrenches reach 94 to 99 dB(A), and Einhell and Scheppach require hearing protection. Safety glasses belong with the blow gun. Blowing off skin and clothing is off-limits regardless of pressure. When painting, Einhell requires respiratory protection with a filter for harmful substances.
Sources
- Metabo: LPZ 4 Set (601585000)
- Einhell: 5-piece air tool set (4132720)
- Güde: Druckluft-Set 3-tlg. Metall air tool set (84091)
- Metabo: FSP 600 HVLP data sheet (601577000)
- Metabo: FSP 600 data sheet (601575000)
- Einhell: TC-PW 340 air impact wrench (4138950)
- Scheppach: Original operating manual, air impact wrench set (7906100717)
- Metabo: DSSW 360 Set 1/2″ (604118500)
- Einhell: TE-AC 270/50 Silent Plus compressor (4020620)
- KomNet, North Rhine-Westphalia State Office for Health and Occupational Safety: Blowing off clothing with compressed air
- German Noise and Vibration Occupational Safety Ordinance, Section 6 Exposure action values
Where to buy
- Metabo LPZ 4 SetCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Einhell Druckluftset Profi 5-tlg.Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Güde Druckluft-Set 3-tlg. MetallCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Metabo FSP 600 HVLPCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Einhell TC-PW 340Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Scheppach Druckluft-Schlagschrauber-SetView at scheppachAvailable in Germany: scheppachCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Metabo DSSW 360 Set 1/2"Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
