Contents12 sections
This guide was first published in German on handgetestet.de.
A 60 cm porcelain tile on the bathroom floor, one straight cut along the edge, done. You do not need a machine with a water tray for that. A good manual cutter with a cutting length of around 65 centimeters is often enough, and among the tools compared here we name the Rubi TS-66 MAX first, because the manufacturer explicitly specifies it for porcelain tiles and states a breaking force of 800 kilograms. Electric only comes into play when you need to notch out corners, cut very narrow strips or miter edges for outside corners.
Score and snap or wet saw?
A manual cutter scores the glaze with a carbide wheel. A breaker foot then presses the tile apart along that line. It is quick, quiet and leaves no slurry. Straight and diagonal cuts come out clean this way; cutouts for a drain pipe or an L-shaped cut around a door frame, on the other hand, do not.
A wet tile saw works with a diamond blade that a pump constantly cools with water. It handles thick slabs, narrow strips and beveled edges. In return, the two machines in our comparison weigh 32.7 and 50.9 kilograms and need power and floor space. And at the end of the day, there is a tray of gray water in the room.
Measure the tile first, then choose the cutter
A typical bad buy starts with the assumption that a 60 cm cutter will handle 60 cm tiles in any orientation. For straight cuts, that is true. Diagonally, however, a 66-centimeter tool only handles tiles up to 46 × 46 centimeters according to Rubi. Cutting a 60 cm tile corner to corner mathematically requires just under 85 centimeters. With 60 × 120, the long edge has to fit completely under the guide, which calls for a 125-centimeter cutter such as the one Montolit offers as the 125P3.
The second number is the maximum tile thickness. Rubi specifies 6 to 15 millimeters for the TS-MAX series, Montolit up to 22 millimeters for the Masterpiuma P3. With 20-millimeter patio pavers, that is exactly what decides it. Also make sure the manufacturer explicitly mentions porcelain tiles and fits a coated scoring wheel: Kaufmann uses a TiN-coated carbide wheel, Montolit a titanium-coated wheel.
Quartz dust, water and electricity
Tiles contain sand. According to the BG BAU, the German statutory accident insurance for the construction industry, working sand-containing materials such as mortar, clinker brick or tiles can release quartz dust, which over the years can lead to silicosis and is classified as carcinogenic. The BG BAU therefore advises snapping tiles rather than sawing them. With wet cutting, dust exposure drops significantly, provided the circulating water is changed at least daily. If you work out curves with an angle grinder (in German), the BG BAU says you should use direct extraction.
Water and mains power at the same table call for discipline. In the manual for the FS3600, Scheppach specifies that the machine may only be operated with the factory-fitted residual current device in the cable (PRCD, 10 mA) and that it must be checked with the test button before every use. If it does not trip, there is no personal protection. The same manual requires safety glasses and states a sound power level of 85 dB, at which hearing protection must be worn. For the sharp break edges of porcelain tiles, you will find suitable models in our guide to work gloves.
Six tile cutters, the numbers side by side
Rubi TS-66 MAX
Rubi lists the TS-MAX series as a professional tool for stoneware and explicitly names porcelain tiles of group BIa. According to the manufacturer, the fixed breaking point presses with up to 800 kilograms, and it cuts tiles from 6 to 15 millimeters. With its case, the cutter weighs 13.4 kilograms. For a bathroom with 60 cm floor tiles, this is the cutter we would hand over first.
Montolit Masterpiuma 63P3
The Masterpiuma from Italy scores on the push stroke and, according to the data sheet, takes tiles up to 22 millimeters. Montolit states 9.5 kilograms for the 63 model. A small oiler in the handle lubricates the wheel when needed, and the square and extension fold into the tool. If you want to snap thick patio pavers, you are better served here than with the Rubi.
Sigma 2B3
A classic pull cutter. You draw the wheel toward you instead of pushing it away. Sigma states 66 centimeters straight, 46 × 46 diagonal, a tile thickness of 3 to 19 millimeters and a weight of seven kilograms. The manufacturer itself describes the tool as compact for small and medium formats, and that is how we would use it too.
Kaufmann TopLine PRO 630
According to Kaufmann, the company develops and manufactures its cutting machines in Austria. The TopLine PRO has a solid guide rail with maintenance-free ball-bearing guidance, a stop square for 90 and 45 degrees and a breaker with up to 1,000 kilograms. Kaufmann does not state a maximum tile thickness online. There is one sentence from the manual worth remembering: the guide rail stays dry, neither oiled nor greased, otherwise oil and dust form black streaks.
Einhell TE-TC 620/1 U
On this radial machine, the motor head sits above the table, and the 200-millimeter diamond blade is cooled from the tray by a pump. Einhell states a cutting length of 620 millimeters, a cutting height of 30 millimeters and a head that tilts up to 45 degrees. The stand folds up and rolls on two wheels. Alongside a manual cutter, it is the obvious addition for bathrooms with many cutouts, but it does not replace one.
Scheppach FS3600
Considerably larger. Scheppach states a cutting length of 920 millimeters, 650 millimeters diagonally, a cutting height of 36 millimeters and a table measuring 129 × 40 centimeters, plus a cutting laser. At 50.9 kilograms, the machine belongs in a fixed spot, such as the garage, and not on the third floor without an elevator. The residual current device built into the cable is a plus, but you have to test it before every start.
How we would decide
- Porcelain floor tiles up to 60 × 60 cm, straight layout: Rubi TS-66 MAX, alternatively Kaufmann TopLine PRO 630.
- Patio pavers around 20 mm: Montolit Masterpiuma 63P3, because it cuts up to 22 mm.
- Small-format wall tiles: Sigma 2B3.
- Many pipe penetrations and outside corners: the Einhell TE-TC 620/1 U in addition.
- Long formats up to 90 cm with wet cutting and space in the garage: Scheppach FS3600.
And if you are laying 60 × 120, look for a manual cutter with 125 centimeters. None of the six tools can handle that edge.
Frequently asked questions
Manual cutter or wet saw for tiles?
A manual cutter scores and snaps the tile, quickly, quietly and without slurry, for straight and diagonal cuts. Cutouts for pipes or L-shaped cuts are not possible with it. For those, you need a wet tile saw with a diamond blade, which is heavy, needs power and leaves behind a tray of gray water.
Is a 60 cm tile cutter enough for 60 cm tiles?
For straight cuts, yes. Diagonally, however, a 66-centimeter tool only handles tiles up to 46 × 46 centimeters according to Rubi. Cutting a 60 cm tile corner to corner mathematically requires just under 85 centimeters.
Which tile cutter can handle 60 × 120 tiles?
The long edge has to fit completely under the guide, which calls for a 125-centimeter cutter such as the one Montolit offers as the 125P3. None of the six tools compared can handle this edge.
Which tile cutter is suitable for thick patio pavers?
The decisive factor is the maximum tile thickness. Rubi specifies 6 to 15 millimeters for the TS-MAX series, Montolit up to 22 millimeters for the Masterpiuma P3. For patio pavers around 20 mm, the Montolit Masterpiuma 63P3 is therefore the right choice.
Is tile dust dangerous?
According to the BG BAU (German statutory accident insurance for the construction industry), working tiles can release quartz dust, which over the years can lead to silicosis and is classified as carcinogenic. It advises snapping tiles rather than sawing them. With wet cutting, exposure drops significantly if the circulating water is changed at least daily.
What should you watch for with a wet tile saw?
For the FS3600, Scheppach specifies that the machine may only be operated with the residual current device built into the cable and that it must be checked with the test button before every start. If it does not trip, there is no personal protection. The manual also requires safety glasses and hearing protection.
Sources
- Rubi: TS-MAX, technical data
- Montolit: Masterpiuma P3
- Montolit: Masterpiuma P3 data sheet (PDF)
- Sigma: Serie Standard with item 2B3
- Kaufmann: TopLine PRO
- Kaufmann: TopLine PRO manual (PDF)
- Einhell: TE-TC 620/1 U
- Scheppach: FS3600 tile cutter
- Scheppach: FS3600/FS4700 operating manual (PDF)
- BG BAU/BMAS (German Federal Ministry of Labour): Schluss mit Staub (an end to dust) (PDF)
- BG BAU: Quartz dust (PDF)
Where to buy
- Rubi TS-66 MAXCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Montolit Masterpiuma 63P3Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Sigma 2B3Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Kaufmann TopLine PRO 630 (Stahl-Grundplatte)Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Einhell TE-TC 620/1 UCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Scheppach FS3600€449.99≈ £374.80≈ CHF 415.93≈ PLN 1,985.27≈ SEK 5,014.24≈ DKK 3,363.41≈ NOK 4,771.92≈ CZK 10,973.46≈ HUF 165,776≈ RON 2,405.96≈ ISK 61,649≈ $493.55≈ CA$706.03 at scheppach · As of 19.11.View at scheppachAvailable in Germany: scheppachCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
Still undecided?
Keep comparing at your own pace – every article in this category is checked monthly for new and discontinued models.






